> On 17 Jun 2020, at 18:20, Martin Duke <[email protected]> wrote:
>
> Hi Stewart,
>
> If there are no further objections, I'm going to declare consensus.
>
> On Thu, Jun 11, 2020 at 1:45 PM Martin Duke <[email protected]
> <mailto:[email protected]>> wrote:
> Stewart,
>
> do we need more cycles for this, or is draft-15 sufficient to address your
> concerns?
>
> On Mon, Jun 8, 2020 at 12:52 PM Mark Allman <[email protected]
> <mailto:[email protected]>> wrote:
>
> Hi Stewart, et.al <http://et.al/>.!
>
> I just submitted a new version of rto-consider. Please ask the
> datatracker for diffs between this and rev -14. The highlights:
>
> - The diffs with the last rev are here:
> https://tools.ietf.org/rfcdiff?difftype=--hwdiff&url2=draft-ietf-tcpm-rto-consider-15.txt
>
> <https://tools.ietf.org/rfcdiff?difftype=--hwdiff&url2=draft-ietf-tcpm-rto-consider-15.txt>
In the general case, delay across a
network path depends not only on distance, but also a number of
variable components such as the route and the level of buffering in
intermediate devices.
Its is more the contending/conflicting traffic rather than the buffering, or
perhaps the time spent in queues, but “buffering” is a link a transport
colloquial term.
Since our wide-area network paths are best
effort, packet loss is a regular occurrence.
No the best effort Internet experiences this. There ate many well engineered
WAN that do not.
What I am not seeing is clearer text that distinguishes between user traffic
and “engineering” traffic that is used to make the network work, and between
the end to end traffic and traffic within an AS that may be there for other
purposes (high value service also offered by the provider) and WANs that are
well engineered.
Perhaps we could include a clearer disclaimer regarding the
non-best-effort-internet-end-to-end traffic?
You have some text on this down in section 2 but it is a bit buried.
Perhaps something early on of the form: This document is specially concerned
with end to end behaviour over the best effort Internet. As noted in section 2
it may not me applicable to other types of WAN, or to the traffic used in
affecting the operation of the Internet itself.
An exception to this rule is if an IETF standardized mechanism
determines that a particular loss is due to a non-congestion
event (e.g., packet corruption).
That is a bit heavy. It should be “a protocol” there than an IETF
standardarized mechanism. The IETF does not have a monopoly on pre-blessing
protocols before they are deployed.
>
> - All small comments addressed.
>
> - I think we all agree that this is not a one-size-fits-all
> situation. Rather, this document is meant to be a default case.
> So, the main action of this rev is to make that point more
> clearly. The first paragraph in the intro is new. Also, there
> are some more words fleshing out the context more in section 2.
> In particular, more emphatically making the point that other
> loss detectors are fine for specific cases.
As I note above from a routing and packet transport (as opposed to the
transport layer) perspective I think we should more clearly recognise at the
beginning the fact that this is for the worst case network, not for well
engineered (WAN and DC) networks and the mechanisms fundamental to the
operation of the network itself.
>
> - The first paragraph in the intro also makes clear we adopt the
> loss == congestion model (as that is the conservative default,
> not because it is always true).
>
> - I made one other change that wasn't exactly called for, but
> seems like an oversight.
>
> Previously guideline (4) said loss MUST be taken as an
> indication of congestion and some standard response taken. But,
> this guideline has an explicit exception for cases where we know
> the loss was caused by some non-congestion event. Guideline (3)
> says you MUST backoff. But, it did not have this exception for
> cases where we can tell the cause. But, I think based on the
> spirit of (4), (3) should also have these words. So, I added
> them.
In some cases you cannot tell the cause, but it is more important to ignore the
loss. OAM being a particularly good example.
>
> Also, I swapped (3) and (4) because it seemed more natural in
> re-reading to first think about taking congestion action and
> then dealing with backoff. I think the ordering is a small
> thing, but folks can yell and I'll put it back if there is
> angst.
>
> Please take a look and let me know if this helps things along or
> not.
>
> allman
We are getting there, but I would ask that you take the transport hat off and
look again from an infrastructure and packet transport perspective.
Best regards
Stewart
_______________________________________________
Gen-art mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/gen-art
