Hi again Joel,
This is what I wound up doing (MM):
> Section 4 (Representations for BIER-FRR Forwarding Data) begins:
"To minimize the occurrence of redundant packets, it is essential that backup
entries are prioritized for use within the single extended BIFT, as described
in Section 3.2)."
However, section 3.2 does not discuss prioritizing anything nor duplicate
avoidance. I presume this should reference some other section of the
document? (Some of the relevant text is in section 4.1.)
MM: Extended BIFTs are described in several areas so I wound up just dropping
the "as described in Section 3.2)."
Section 5.3 (Example, in Protection Levels) seems to be showing various
backup paths. I found myself confused when the text says that the backup
path to provide node protection for B5 (presumably, for the case where B5
is thought to have failed) ends with -B5?
MM: To make it more clear that it's protecting B5 from a B6 node failure I
changed the sentence to "Protecting BFER B5 from a BFR-NBR B6 node
failure can only be provided through the backup path B1-B2-B3-B4-B5." This
matches Figure 8.
Thanks again.
mike
_______________________________________________
Gen-art mailing list -- [email protected]
To unsubscribe send an email to [email protected]
