Yes - it was 3.2.2, I think. Upgrading to 3.2.4 fixed my problem: thanks! -Mike
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Michael Blakeley > Sent: Tuesday, October 28, 2008 5:57 PM > To: General Mark Logic Developer Discussion > Subject: Re: [MarkLogic Dev General] sessions disabled in CQ > for Marklogic 4.0 > > Mike, > > Judging by the line numbers, I don't think you're using cq > 3.2.4 or 4.0-1.1. If you can try again with either of those > releases, it will be easier for me to help. > > http://developer.marklogic.com/svn/cq/releases/ > > -- Mike > > Mike Sokolov wrote: > > I went back and checked, and my error report is not really > the same as > > Cathy's, although it does seem to have something to do with > timestamp > > checking. > > > > (clicking on "sessions disabled"): > > > > WARNING: sessions have been disabled, because of an error. > > > > > > Perhaps you have disabled sessions for this > instance of cq. > > If so, you can ignore this and return to cq. > > > > > > > > You are running cq from the filesystem. > > Make sure that the directory /cq/sessions/ > > exists, and that MarkLogic Server can write to it. > > > > > > The complete error message follows: > > > > <err:error xsi:schemaLocation="http://marklogic.com/xdmp/error > > error.xsd" xmlns:err="http://marklogic.com/xdmp/error"; > > xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";> > > <err:code>XDMP-CAST</err:code> > > <err:message>Invalid cast</err:message> > > <err:format-string>XDMP-CAST: () cast as xs:dateTime -- > Invalid cast: > > () cast as xs:dateTime</err:format-string> > > <err:retryable>false</err:retryable> > > <err:expr>() cast as xs:dateTime</err:expr> > > <err:data> > > <err:datum>()</err:datum> > > <err:datum>xs:dateTime</err:datum> > > </err:data> > > <err:stack> > > <err:frame> > > <err:uri>/cq/lib-controller.xqy</err:uri> > > <err:line>273</err:line> > > <err:operation>c:get-sessions(true())</err:operation> > > <err:variables> > > <err:variable> > > <err:name > > > xmlns="com.marklogic.developer.cq.controller">check-conflictin g</err:name> > > <err:value>true()</err:value> > > </err:variable> > > <err:variable> > > <err:name > xmlns="com.marklogic.developer.cq.controller">i</err:name> > > <err:value><sess:session id="f0777f6bc385fd1a" > > xmlns:sess="com.marklogic.developer.cq.session"><sec:user > > > xmlns:sec="http://marklogic.com/xdmp/security">ifactor...&l t;/sess:session></err:value> > > </err:variable> > > </err:variables> > > </err:frame> > > <err:frame> > > <err:uri>/cq/lib-controller.xqy</err:uri> > > <err:line>255</err:line> > > <err:operation>c:get-available-sessions()</err:operation> > > </err:frame> > > <err:frame> > > <err:uri>/cq/lib-controller.xqy</err:uri> > > <err:line>307</err:line> > > <err:operation>c:get-last-session()</err:operation> > > </err:frame> > > <err:frame> > > <err:uri>/cq/lib-controller.xqy</err:uri> > > <err:line>190</err:line> > > <err:variables> > > <err:variable> > > <err:name > xmlns="com.marklogic.developer.cq.controller">d</err:name> > > <err:value>()</err:value> > > </err:variable> > > <err:variable> > > <err:name > > xmlns="com.marklogic.developer.cq.controller">session</err:name> > > <err:value>()</err:value> > > </err:variable> > > <err:variable> > > <err:name > xmlns="com.marklogic.developer.cq.controller">d</err:name> > > <err:value>()</err:value> > > </err:variable> > > </err:variables> > > </err:frame> > > <err:frame> > > <err:uri>/cq/session.xqy</err:uri> > > <err:line>62</err:line> > > </err:frame> > > </err:stack> > > </err:error> > > > > > > Now, if I empty out the sessions folder and chmod a+rwx sessions, I > > get > > "session: New Session" in cq. Then clicking through I get > the message > > "There are no resumable sessions..." then I create a new > one using the > > button, but it doesn't seem to get associated with my > browser session? > > > > Then if I wipe out my cq cookie and refresh, I go back to the > > "sessions disabled" message... > > > > > > > > Michael Blakeley wrote: > >> Cathy, > >> > >> Thanks for the report. I'm having trouble reproducing the error, > >> though. As I see it, this test case ought to be equivalent: > >> > >> import module namespace cxq="com.marklogic.developer.cq.xquery" > >> at 'cq/lib-xquery.xqy'; > >> > >> > cxq:get-epoch-seconds(xs:dateTime("2008-10-28T15:42:45.600414-04:00") > >> ) > >> => 1225222965 > >> > >> So I'm not at all sure what's happening, but I'll keep > digging into > >> it. What happens if you reload (F5) the cq page? Same > error, but with > >> a different timestamp? > >> > >> Mike Sokolov suggested that the problem might have something to do > >> with timestamps on the filesystem. What happens if you 'touch' the > >> sessions directory and all its files, then reload cq? I'm > thinking of > >> something like 'touch cq/sessions cq/sessions/*'. > >> > >> -- Mike > >> > >> Cathy Bernardone wrote: > >>> We have installed Marklogic 4.0 and CQ for 4.0 as well. However, > >>> when running CQ, sessions remained disabled. Our > directories have > >>> proper permissions for anyone to access them. Below is > the error > >>> message we get when clicking on "sessions disabled". > Help would be > >>> greatly appreciated. > >>> > >>> Cathy > >>> > >>> > >>> > >>> > >>> > >>> WARNING: sessions have been disabled, because of an error. > >>> > >>> > >>> Perhaps you have disabled sessions for this > instance of cq. > >>> If so, you can ignore this and return to cq. > >>> > >>> > >>> > >>> You are running cq from the filesystem. > >>> Make sure that the directory /cq/sessions/ > >>> exists, and that MarkLogic Server can write to it. > >>> > >>> > >>> The complete error message follows: > >>> > >>> <error:error xsi:schemaLocation="http://marklogic.com/xdmp/error > >>> error.xsd" xmlns:error="http://marklogic.com/xdmp/error"; > >>> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance "> > >>> <error:code>XDMP-AS</error:code> > >>> <error:name>err:XPTY0004</error:name> > >>> <error:xquery-version>0.9-ml</error:xquery-version> > >>> <error:message>Invalid coercion</error:message> > >>> <error:format-string>XDMP-AS: (err:XPTY0004) $d as > >>> xdt:dayTimeDuration -- Invalid coercion: > >>> xs:dayTimeDuration("P14180DT19H42M45.600414S") as > >>> xdt:dayTimeDuration</ error:format-string> > >>> <error:retryable>false</error:retryable> > >>> <error:expr>$d as xdt:dayTimeDuration</error:expr> > >>> <error:data> > >>> <error:datum>xs:dayTimeDuration("P14180DT19H42M45.600414S")</ > >>> error:datum> > >>> <error:datum>xdt:dayTimeDuration</error:datum> > >>> </error:data> > >>> <error:stack> > >>> <error:frame> > >>> <error:uri>/cq/lib-xquery.xqy</error:uri> > >>> <error:line>45</error:line> > >>> <error:operation>x:cumulative-seconds-from- > >>> duration(xs:dayTimeDuration("P14180DT19H42M45.600414S"))</ > >>> error:operation> > >>> <error:xquery-version>0.9-ml</error:xquery-version> > >>> </error:frame> > >>> <error:frame> > >>> <error:uri>/cq/lib-xquery.xqy</error:uri> > >>> <error:line>58</error:line> > >>> <error:operation>x:get-epoch- > >>> seconds(xs:dateTime("2008-10-28T15:42:45.600414-04:00"))</ > >>> error:operation> > >>> <error:variables> > >>> <error:variable> > >>> <error:name > >>> xmlns="com.marklogic.developer.cq.xquery">dt</error:name> > >>> > <error:value>xs:dateTime("2008-10-28T15:42:45.600414-04:00")</ > >>> error:value> > >>> </error:variable> > >>> </error:variables> > >>> <error:xquery-version>0.9-ml</error:xquery-version> > >>> </error:frame> > >>> <error:frame> > >>> <error:uri>/cq/lib-xquery.xqy</error:uri> > >>> <error:line>66</error:line> > >>> <error:operation>x:get-epoch-seconds()</error:operation> > >>> <error:xquery-version>0.9-ml</error:xquery-version> > >>> </error:frame> > >>> <error:frame> > >>> <error:uri>/cq/lib-io.xqy</error:uri> > >>> <error:line>410</error:line> > >>> <error:operation>io:get-conflicting-locks("/cq/sessions/ > >>> d064d36f04973c13.xml", (), "[EMAIL PROTECTED]")</error:operation> > >>> <error:variables> > >>> <error:variable> > >>> <error:name > xmlns="com.marklogic.developer.cq.io">uri</error:name> > >>> > <error:value>"/cq/sessions/d064d36f04973c13.xml"</error:value> > >>> </error:variable> > >>> <error:variable> > >>> <error:name > >>> xmlns="com.marklogic.developer.cq.io">limit</error:name> > >>> <error:value>()</error:value> > >>> </error:variable> > >>> <error:variable> > >>> <error:name > >>> xmlns="com.marklogic.developer.cq.io">owner</error:name> > >>> <error:value>"[EMAIL PROTECTED]"</error:value> > >>> </error:variable> > >>> </error:variables> > >>> <error:xquery-version>1.0-ml</error:xquery-version> > >>> </error:frame> > >>> <error:frame> > >>> <error:uri>/cq/lib-controller.xqy</error:uri> > >>> <error:line>306</error:line> > >>> <error:operation>c:get-conflicting-locks("/cq/sessions/ > >>> d064d36f04973c13.xml", ())</error:operation> > >>> <error:variables> > >>> <error:variable> > >>> <error:name > >>> xmlns="com.marklogic.developer.cq.controller">uri</ > >>> error:name> > >>> > <error:value>"/cq/sessions/d064d36f04973c13.xml"</error:value> > >>> </error:variable> > >>> <error:variable> > >>> <error:name > >>> xmlns="com.marklogic.developer.cq.controller">limit</ error:name> > >>> <error:value>()</error:value> > >>> </error:variable> > >>> </error:variables> > >>> <error:xquery-version>1.0-ml</error:xquery-version> > >>> </error:frame> > >>> <error:frame> > >>> <error:uri>/cq/lib-controller.xqy</error:uri> > >>> <error:line>298</error:line> > >>> <error:operation>c:get-conflicting-locks("/cq/sessions/ > >>> d064d36f04973c13.xml")</error:operation> > >>> <error:variables> > >>> <error:variable> > >>> <error:name > >>> xmlns="com.marklogic.developer.cq.controller">uri</ > >>> error:name> > >>> > <error:value>"/cq/sessions/d064d36f04973c13.xml"</error:value> > >>> </error:variable> > >>> </error:variables> > >>> <error:xquery-version>1.0-ml</error:xquery-version> > >>> </error:frame> > >>> <error:frame> > >>> <error:uri>/cq/lib-controller.xqy</error:uri> > >>> <error:line>331</error:line> > >>> <error:operation>c:get-sessions(true())</error:operation> > >>> <error:variables> > >>> <error:variable> > >>> <error:name > >>> xmlns="com.marklogic.developer.cq.controller">check- > >>> conflicting</error:name> > >>> <error:value>true()</error:value> > >>> </error:variable> > >>> <error:variable> > >>> <error:name > xmlns="com.marklogic.developer.cq.controller">i</ > >>> error:name> > >>> <error:value><session id="d064d36f04973c13" > >>> xmlns="com.marklogic.developer.cq.session"><sec:user > >>> xmlns:sec="http://marklogic.com/xdmp/security > >>> ">admin</...</session></error:value> > >>> </error:variable> > >>> </error:variables> > >>> <error:xquery-version>1.0-ml</error:xquery-version> > >>> </error:frame> > >>> <error:frame> > >>> <error:uri>/cq/lib-controller.xqy</error:uri> > >>> <error:line>315</error:line> > >>> > <error:operation>c:get-available-sessions()</error:operation> > >>> <error:xquery-version>1.0-ml</error:xquery-version> > >>> </error:frame> > >>> <error:frame> > >>> <error:uri>/cq/lib-controller.xqy</error:uri> > >>> <error:line>377</error:line> > >>> <error:operation>c:get-last-session()</error:operation> > >>> <error:xquery-version>1.0-ml</error:xquery-version> > >>> </error:frame> > >>> <error:frame> > >>> <error:uri>/cq/lib-controller.xqy</error:uri> > >>> <error:line>240</error:line> > >>> <error:variables> > >>> <error:variable> > >>> <error:name > xmlns="com.marklogic.developer.cq.controller">d</ > >>> error:name> > >>> <error:value>()</error:value> > >>> </error:variable> > >>> <error:variable> > >>> <error:name > >>> xmlns="com.marklogic.developer.cq.controller">session</ > error:name> > >>> <error:value>()</error:value> > >>> </error:variable> > >>> <error:variable> > >>> <error:name > xmlns="com.marklogic.developer.cq.controller">d</ > >>> error:name> > >>> <error:value>()</error:value> > >>> </error:variable> > >>> </error:variables> > >>> <error:xquery-version>1.0-ml</error:xquery-version> > >>> </error:frame> > >>> <error:frame> > >>> <error:uri>/cq/session.xqy</error:uri> > >>> <error:line>62</error:line> > >>> <error:xquery-version>1.0-ml</error:xquery-version> > >>> </error:frame> > >>> </error:stack> > >>> </error:error> > >>> > >>> > >>> > -------------------------------------------------------------------- > >>> ---- > >>> > >>> _______________________________________________ > >>> General mailing list > >>> [email protected] > >>> http://xqzone.com/mailman/listinfo/general > >> _______________________________________________ > >> General mailing list > >> [email protected] > >> http://xqzone.com/mailman/listinfo/general > > _______________________________________________ > > General mailing list > > [email protected] > > http://xqzone.com/mailman/listinfo/general > > _______________________________________________ > General mailing list > [email protected] > http://xqzone.com/mailman/listinfo/general > _______________________________________________ General mailing list [email protected] http://xqzone.com/mailman/listinfo/general
