Thank you for the clear report. Apparently some function keys
are hijacked by Terminal menu shortcuts.
"Run All Lines","F10"
"&Clipboard","F8"
"Run &Project","F9"
"&Test","F5"
I'll change Function key binding in addons to avoid conflict.
Sun, 16 Feb 2020, Brian Schott написал(а):
> F8 and F9 (and maybe F10) are shortcut keys for jqt.
> The script I am developing around shader.ijs uses F10 to start and stop a
> timer but does not work well for me. I have constructed the shortened
> script below to demonstrate the problem.
>
> In the demonstration the usual keys perform correctly and the verb
> `a_g_char` echoes their keypresses in any situation when the control/window
> "a" is in focus. No problems here.
>
> Also in the demonstration F6 and F7 echo their keypresses in any situation
> when the control/window "a" is in focus.
>
> But F10 (and F8 and F9) needs special attention. In order for F10 to work
> in the desired manner, first the Terminal window must be brought into focus
> AND THEN the "a" window must be in focus. Only then can ALL the keys avoid
> shortcut behavior.
>
> This detour of additional refocusing has to be avoided, please.
>
> NB. [I have commented out the "requirements" below to
> NB. make them noticeable, but they are not used here,
> NB. afaik.]
>
> NB. require 'gl2'
> NB. coinsert 'jgl2'
> NB. require 'gles'
> NB. coinsert 'jgles'
> NB. require '~addons/ide/qt/opengl.ijs'
> NB. coinsert 'qtopengl'
>
> STOP=: 0
> TN=: 1
>
> A=: 0 : 0
> pc a;
> minwh 300 300;cc g opengl flush;
> rem form end;
> )
>
> a_run=: 3 : 0
> wd A
> HD=: ".wd'qhwndc g'
> wd 'pshow'
> )
>
> a_g_char=: 3 : 0
> if. 0=#sysdata do. return. end.
> smoutput k=. 0{sysdata
>
> )
>
> a_f6_fkey=: 3 : 0
> smoutput 'F6';TN
> TN=: TN-1
> )
>
> a_f7_fkey=: 3 : 0
> smoutput 'F7';TN
> TN=: TN+1
> )
>
> a_f10_fkey=: 3 : 0
> smoutput 'STOP';STOP=: -.STOP
> )
>
> a_cancel=: a_close
> a_close=: 3 : 0
> STOP=: 0
> wd 'pclose'
> )
> a_run''
>
>
>
>
> JVERSION
> Engine: j807/j64/darwin
> Release-c: commercial/2019-02-24T10:50:40
> Library: 8.07.26
> Qt IDE: 1.7.9/5.9.7
> Platform: Darwin 64
> Installer: J807 install
> InstallPath: /users/brian/j64-807
> Contact: www.jsoftware.com
>
> --
> (B=)
> ----------------------------------------------------------------------
> For information about J forums see http://www.jsoftware.com/forums.htm
--
regards,
====================================================
GPG key 1024D/4434BAB3 2008-08-24
gpg --keyserver subkeys.pgp.net --armor --export 4434BAB3
----------------------------------------------------------------------
For information about J forums see http://www.jsoftware.com/forums.htm
