Hi Yaman,
Kindly find attached files
Make name: NETMOS Technology I/O Card
Thanks for the help
Ghassan
-----Original Message-----
From: Yaman Saqqa [mailto:[EMAIL PROTECTED]
Sent: Sunday, January 29, 2006 1:59 PM
To: Jordan Linux User Group Mailing list
Subject: Re: [JoLUG-General] Install PCI Card under linux
Your next step is to use 'setserial'
Please post the result of: ' lspci -v ' and 'dmesg'
Tha make of the card would be helpful as well.
There is also a chance that the serial ports have already been configured:
try:
setserial -g /dev/ttyS*
On 1/29/06, Ghassan Odeh <[EMAIL PROTECTED]> wrote:
> The card has 2 serial RS32 ports and 1 Parallel port. Because I need more
> serial ports on my pc
>
>
>
>
> -----Original Message-----
> From: Yaman Saqqa [mailto:[EMAIL PROTECTED]
> Sent: Sunday, January 29, 2006 12:48 PM
> To: Jordan Linux User Group Mailing list
> Subject: Re: [JoLUG-General] Install PCI Card under linux
>
> What kind of card it is? Double check that the system actually sees it
> (lspci).
>
> On 1/29/06, Ghassan Odeh <[EMAIL PROTECTED]> wrote:
> >
> >
> >
> > Hi all,
> >
> >
> >
> > Is there an easy way to install PCI card under redhat 9. I have the
> driver!
> >
> >
> >
> > Thanks
> >
> >
> >
> > Ghassan
> > _______________________________________________
> > General mailing list
> > [email protected]
> > http://mail.jolug.org/mailman/listinfo/general_jolug.org
> >
> >
> >
>
>
> --
> abulyomon
>
> www.KiLLTHeUPLiNK.com
>
> _______________________________________________
> General mailing list
> [email protected]
> http://mail.jolug.org/mailman/listinfo/general_jolug.org
>
>
>
>
>
> _______________________________________________
> General mailing list
> [email protected]
> http://mail.jolug.org/mailman/listinfo/general_jolug.org
>
--
abulyomon
www.KiLLTHeUPLiNK.com
_______________________________________________
General mailing list
[email protected]
http://mail.jolug.org/mailman/listinfo/general_jolug.org
00:00.0 Host bridge: Intel Corp. 82865G [Springdale-G] Chipset Host Bridge (rev
02)
Subsystem: Intel Corp. 82865G [Springdale-G] Chipset Host Bridge
Flags: bus master, fast devsel, latency 0
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [e4] #09 [2106]
Capabilities: [a0] AGP version 3.0
00:01.0 PCI bridge: Intel Corp.: Unknown device 2571 (rev 02) (prog-if 00
[Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00009000-00009fff
Memory behind bridge: ff800000-ff8fffff
Prefetchable memory behind bridge: e6b00000-f6afffff
00:1d.0 USB Controller: Intel Corp. 82801EB USB (Hub #1) (rev 02) (prog-if 00
[UHCI])
Subsystem: Intel Corp.: Unknown device 524c
Flags: bus master, medium devsel, latency 0, IRQ 9
I/O ports at cc00 [size=32]
00:1d.1 USB Controller: Intel Corp. 82801EB USB (Hub #2) (rev 02) (prog-if 00
[UHCI])
Subsystem: Intel Corp.: Unknown device 524c
Flags: bus master, medium devsel, latency 0, IRQ 5
I/O ports at d000 [size=32]
00:1d.2 USB Controller: Intel Corp. 82801EB USB (Hub #3) (rev 02) (prog-if 00
[UHCI])
Subsystem: Intel Corp.: Unknown device 524c
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at d400 [size=32]
00:1d.3 USB Controller: Intel Corp. 82801EB USB EHCI Controller #2 (rev 02)
(prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 524c
Flags: bus master, medium devsel, latency 0, IRQ 9
I/O ports at d800 [size=32]
00:1d.7 USB Controller: Intel Corp. 82801EB USB EHCI Controller (rev 02)
(prog-if 20 [EHCI])
Subsystem: Intel Corp.: Unknown device 524c
Flags: bus master, medium devsel, latency 0, IRQ 10
Memory at ffaffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [20a0]
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev c2) (prog-if 00
[Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000a000-0000bfff
Memory behind bridge: ff900000-ff9fffff
00:1f.0 ISA bridge: Intel Corp. 82801EB ISA Bridge (LPC) (rev 02)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corp. 82801EB ICH5 IDE (rev 02) (prog-if 8a
[Master SecP PriP])
Subsystem: Intel Corp.: Unknown device 524c
Flags: bus master, medium devsel, latency 0
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at ffa0 [size=16]
Memory at 10000000 (32-bit, non-prefetchable) [size=1K]
00:1f.2 IDE interface: Intel Corp.: Unknown device 24d1 (rev 02) (prog-if 8f
[Master SecP SecO PriP PriO])
Subsystem: Intel Corp.: Unknown device 524c
Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 11
I/O ports at ec00 [size=8]
I/O ports at e800 [size=4]
I/O ports at e400 [size=8]
I/O ports at e000 [size=4]
I/O ports at dc00 [size=16]
00:1f.3 SMBus: Intel Corp. 82801EB SMBus (rev 02)
Subsystem: Intel Corp.: Unknown device 524c
Flags: medium devsel, IRQ 3
I/O ports at c800 [size=32]
00:1f.5 Multimedia audio controller: Intel Corp. 82801EB AC'97 Audio (rev 02)
Subsystem: Intel Corp.: Unknown device e000
Flags: bus master, medium devsel, latency 0, IRQ 3
Memory at ffaff800 (32-bit, non-prefetchable) [size=512]
Memory at ffaff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
01:01.0 VGA compatible controller: ATI Technologies Inc Radeon VE QY (prog-if
00 [VGA])
Subsystem: ATI Technologies Inc Radeon 7000/Radeon VE
Flags: bus master, stepping, 66Mhz, medium devsel, latency 32
Memory at e8000000 (32-bit, prefetchable) [size=128M]
I/O ports at 9800 [size=256]
Memory at ff8f0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at ff8c0000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2
02:01.0 Communication controller: NetMos Technology 222N-2 I/O Card (2S+1P)
(rev 01)
Subsystem: LSI Logic / Symbios Logic: Unknown device 0012
Flags: medium devsel, IRQ 11
I/O ports at bc00 [size=8]
I/O ports at b800 [size=8]
I/O ports at b400 [size=8]
I/O ports at b000 [size=8]
I/O ports at ac00 [size=8]
I/O ports at a800 [size=16]
02:02.0 Modem: PCTel Inc: Unknown device 2189 (rev 04) (prog-if 00 [Generic])
Subsystem: PCTel Inc: Unknown device 1002
Flags: bus master, stepping, medium devsel, latency 32, IRQ 3
Memory at ff9ff000 (32-bit, non-prefetchable) [size=4K]
I/O ports at a400 [size=256]
Capabilities: [80] Power Management version 2
02:03.0 Ethernet controller: Davicom Semiconductor, Inc. Ethernet 100/10 MBit
(rev 31)
Subsystem: Unknown device 4554:434e
Flags: bus master, medium devsel, latency 32, IRQ 5
I/O ports at a000 [size=256]
Memory at ff9fec00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at ff980000 [disabled] [size=256K]
Capabilities: [50] Power Management version 1
Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat
Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fe30000 (usable)
BIOS-e820: 000000000fe30000 - 000000000fe3e05e (ACPI NVS)
BIOS-e820: 000000000fe3e05e - 000000000ff30000 (usable)
BIOS-e820: 000000000ff30000 - 000000000ff40000 (ACPI data)
BIOS-e820: 000000000ff40000 - 000000000fff0000 (ACPI NVS)
BIOS-e820: 000000000fff0000 - 0000000010000000 (reserved)
BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
On node 0 totalpages: 65328
zone(0): 4096 pages.
zone(1): 61232 pages.
zone(2): 0 pages.
Kernel command line: ro root=LABEL=/ hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 2793.075 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 5570.56 BogoMIPS
Memory: 252128k/261312k available (1347k kernel code, 6696k reserved, 999k
data, 132k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Trace cache: 12K uops<6>CPU: L2 cache: 1024K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
PCI: Using IRQ router default [8086/24d0] at 00:1f.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
Redundant entry in serial pci_table. Please send the output of
lspci -vv, this message (134d,2189,134d,1002)
and the manufacturer and name of serial board or modem board
to [EMAIL PROTECTED]
register_serial(): autoconfig failed
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 00:1f.1
PCI: Enabling device 00:1f.1 (0005 -> 0007)
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD400BB-00HEA0, ATA DISK drive
blk: queue c03c9f40, I/O limit 4095Mb (mask 0xffffffff)
hdc: LG CD-RW CED-8083B, ATAPI CD/DVD-ROM drive
hdd: HL-DT-ST CD-ROM GCR-8522B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
hda: [PTBL] [4865/255/63] hda1 hda2 < hda5 hda6 hda7 >
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 146k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 132k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Setting latency timer of device 00:1d.7 to 64
ehci-hcd 00:1d.7: PCI device 8086:24dd (Intel Corp.)
ehci-hcd 00:1d.7: irq 10, pci mem d0849c00
usb.c: new USB bus registered, assigned bus number 1
ehci-hcd 00:1d.7: enabled 64bit PCI DMA
PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
PCI: 00:1d.7 PCI cache line size corrected to 128.
ehci-hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22
hub.c: USB hub found
hub.c: 8 ports detected
usb-uhci.c: $Revision: 1.275 $ time 17:59:01 Mar 13 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0xcc00, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.3 to 64
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 5
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LG Model: CD-RW CED-8083B Rev: 1.09
Type: CD-ROM ANSI SCSI revision: 02
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 24x/32x writer cd/rw xa/form2 cdda tray
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (2041 buckets, 16328 max) - 292 bytes per conntrack
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
divert: allocating divert_blk for eth0
eth0: Davicom DM9102 at pci02:03.0, 00:80:ad:7b:8a:32, irq 5.
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
lp0: console ready
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Detected an Intel(R) 865G, but could not find the secondary device.
Assuming a non-integrated video card.
agpgart: Detected Intel(R) 865G chipset
agpgart: AGP aperture is 64M @ 0xf8000000
[drm] AGP 0.99 on Unknown @ 0xf8000000 64MB
[drm] Initialized radeon 1.7.0 20020828 on minor 0
_______________________________________________
General mailing list
[email protected]
http://mail.jolug.org/mailman/listinfo/general_jolug.org
