This should be a known problem, Other members and I also reported this problem some months ago.
Птн, 01 Июн 2012, Ric Tikkanz писал(а): > There appears to be an subtle issue with all Labs (that I've tested) > when run from the Gtk IDE. > If you just advance through the labs everything is fine. However if > you experiment in the IDE by entering and executing one or more lines > of J and then advance the lab, the first executed line of the next > section is not displayed. > > For example: > 1) Start the Gtk IDE > 2) Help|Studio|Labs > 3) Choose the "A Taste of J (1)" lab > 4) Use Ctrl+j to advance to section (2 of 32) > 5) Follow the lab instructions to experiment > 6) Use Ctrl+j to advance to section (3 of 32) > > The first 2 lines after the commentary are: > > 15 25 35 > > If instead you do steps 2-6 but omit 5 the first 2 lines after the > commentary are: > 5 + 10 20 30 > 15 25 35 > > > The above is just an example but all sections of all labs that I've > tested seem to be affected. > > I've identified this issue in the Gtk IDE on both Linux and Windows. > It seems to be fine in the JHS IDE. Obviously this can be quite > confusing for new J users!! > ---------------------------------------------------------------------- > For information about J forums see http://www.jsoftware.com/forums.htm -- regards, ==================================================== GPG key 1024D/4434BAB3 2008-08-24 gpg --keyserver subkeys.pgp.net --recv-keys 4434BAB3 ---------------------------------------------------------------------- For information about J forums see http://www.jsoftware.com/forums.htm
