2009/6/4 Ariel Camino <[email protected]>:
> Ahí tenes el chipset: RTL8101E/RTL8102E
>
> buscando en google de toque encontrás los drivers:
> http://www.realtek.com.tw/Downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTypeID=3&GetDown=false
>
> Saludos,
> --
> Ariel Camino


Claaaro, esa es la placa FastEthernet la alámbrica. Esa va como piña,
ningún problema.
La que no logro hacer funcionar es la inalámbrica.
Acá va la salida del lshw -C network :

 *-network
       description: Ethernet interface
       product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: p...@0000:02:00.0
       logical name: eth0
       version: 02
       serial: 00:e0:4c:6f:60:3b
       size: 100MB/s
       capacity: 100MB/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list
ethernet physical tp mii 10bt 10bt-fd 10
0bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169
driverversion=2.3LK-NAPI duplex=full ip=
192.168.0.53 latency=0 link=yes module=r8169 multicast=yes port=MII
speed=100MB/s
  *-network UNCLAIMED
       description: Ethernet controller
       physical id: 0
       bus info: p...@0000:04:00.0
       version: 00
       width: 32 bits
       clock: 33MHz
       capabilities: pm bus_master cap_list
       configuration: latency=120 maxlatency=8 mingnt=15
  *-network DISABLED
       description: Ethernet interface
       physical id: 1
       logical name: pan0
       serial: ea:9a:bf:49:6c:b6
       capabilities: ethernet physical
       configuration: broadcast=yes driver=bridge driverversion=2.3
firmware=N/A link=yes multicast=yes


La salida del lsusb :

Bus 001 Device 002: ID eb1a:2761 eMPIA Technology, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

El modelo del equipo Bangho es: B-N0X1

Gracias a todos. Si alguien sabe de una placa USB externa Wifi para
recomendar se los agradecería.
Lanux - Grupo de usuarios de GNU/Linux de Lanus
Visitanos en: http://www.lanux.org.ar

Reglas de etiqueta para el posteo de mensajes a  la lista:
http://www.lanux.org.ar/?page_id=35

Articulos y noticias por rss:
http://www.lanux.org.ar/?feed=rss2 
            
Lanux por irc: 
irc.freenode.net -&gt; #lanux.
_______________________________________________
General mailing list
[email protected]
http://listas.lanux.org.ar/cgi-bin/mailman/listinfo/general

Responder a