> I looked at the code, and didn't see anything obviously > wrong. Can you tell me > how to reproduce the issue? (I'm running 2.6.21-rc3.)
Use a recent OFED 1.2 build, say OFED-1.2-20070308-0708. Configure IPoIB HA to use ib0 and ib1, for example. Make sure your openibd.conf has these lines: IPOIB_LOAD=yes SET_IPOIB_CM=yes IPOIBHA_ENABLE=yes PRIMARY_IPOIB_DEV=ib0 SECONDARY_IPOIB_DEV=ib1 After running "/etc/init.d/openibd restart", start some IPoIB traffic between the two hosts. Now start failing over IB ports, either by cable pulls or a script that takes switch ports up and down. You should see the IP address move back and forth between ib0 and ib1, and error messages in dmesg. Scott _______________________________________________ general mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
