Sasha Khapyorsky wrote:
On Mon, 2007-03-19 at 13:42 +0200, Yevgeny Kliteynik wrote:
Hi Hal,

[V2 of the patch]

This patch fixes a bug in the lid matrices creation:

The lid matrices were not cleared, which caused OSM routing
to crash when routing nonexisting (disconnected) lids.

Where the crash happens? Could you clarify?

In __osm_ucast_mgr_process_neighbor(), there is the following assertion:

       CL_ASSERT( hops <= osm_switch_get_hop_count( p_sw, lid_ho,
                                                    port_num ) );

This assertion fails, since the hop count becomes inconsistent.


Anyway I agree that there is no point to try to generate routes to
disconnected lids, so cleanup is ok. Now about the patch itself - I
would prefer to place min hop tables cleanup in
osm_switch_prepare_path_rebuild(), just something like this:

diff --git a/osm/opensm/osm_switch.c b/osm/opensm/osm_switch.c
index 7c36a54..9273459 100644
--- a/osm/opensm/osm_switch.c
+++ b/osm/opensm/osm_switch.c
@@ -516,6 +516,9 @@ osm_switch_prepare_path_rebuild(
for ( i = 0; i < p_sw->num_ports; i++ )
     osm_port_prof_construct( &p_sw->p_prof[i] );
+
+  osm_switch_clear_hops(p_sw);
+
   if (!p_sw->hops)
   {
     hops = malloc((max_lids + 1)*sizeof(hops[0]));

No problem.

Please apply to ofed_1_2.

I'm not sure about the trunk though.
Sasha,
Can you please check that you latest improvements to the
routing don't have this problem?

With disconnecting switches should be similar behavior I guess.

Right, I checked it - same problem.

I'll issue new patch.

-- Yevgeny.

Sasha

Thanks.
-- Yevgeny

Signed-off-by:  Yevgeny Kliteynik <[EMAIL PROTECTED]>
---
 osm/opensm/osm_ucast_mgr.c |   20 ++++++++++++++------
 1 files changed, 14 insertions(+), 6 deletions(-)

diff --git a/osm/opensm/osm_ucast_mgr.c b/osm/opensm/osm_ucast_mgr.c
index ee6b3f9..8643754 100644
--- a/osm/opensm/osm_ucast_mgr.c
+++ b/osm/opensm/osm_ucast_mgr.c
@@ -1189,6 +1189,7 @@ ucast_mgr_setup_all_switches(osm_subn_t
 {
   osm_switch_t *p_sw;
   uint16_t lids;
+  uint16_t i;
lids = (uint16_t)cl_ptr_vector_get_size(&p_subn->port_lid_tbl);
   lids = lids ? lids - 1 : 0;
@@ -1196,12 +1197,19 @@ ucast_mgr_setup_all_switches(osm_subn_t
   for (p_sw = (osm_switch_t*)cl_qmap_head(&p_subn->sw_guid_tbl);
        p_sw != (osm_switch_t*)cl_qmap_end(&p_subn->sw_guid_tbl);
        p_sw = (osm_switch_t*)cl_qmap_next(&p_sw->map_item))
-  if (osm_switch_prepare_path_rebuild(p_sw, lids)) {
-    osm_log(&p_subn->p_osm->log, OSM_LOG_ERROR,
-            "ucast_mgr_setup_all_switches: ERR 3A0B: "
-            "cannot setup switch 0x%016" PRIx64 "\n",
-            cl_ntoh64(osm_node_get_node_guid(p_sw->p_node)));
-    return -1;
+  {
+    if (osm_switch_prepare_path_rebuild(p_sw, lids)) {
+      osm_log(&p_subn->p_osm->log, OSM_LOG_ERROR,
+              "ucast_mgr_setup_all_switches: ERR 3A0B: "
+              "cannot setup switch 0x%016" PRIx64 "\n",
+              cl_ntoh64(osm_node_get_node_guid(p_sw->p_node)));
+      return -1;
+    }
+
+    /* Clear the LID matrix of the switch */
+    for ( i = 0; i < p_sw->num_hops; i++ )
+      if (p_sw->hops[i])
+        memset(p_sw->hops[i], OSM_NO_PATH, p_sw->num_ports);
   }
return 0;


_______________________________________________
general mailing list
[email protected]
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general

To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general

Reply via email to