Hi folk. > Scott Weitzenkamp (sweitzen) wrote: > > Cisco provides HCA firmware and documentation with our driver releases > > in the form of ISO images, at > > http://www.cisco.com/cgi-bin/tablebuild.pl/sfs-linux, to anyone who > > registers at cisco.com. To get support from Cisco you must have a Cisco > > support contract. > > > > > You may wish to add this to the OFED Wiki: > https://wiki.openfabrics.org/tiki-index.php?page=SupportedHardware > GREGOIRE Philippe wrote: > > What about Mellanox HCA provided by Cisco, Voltaire and Mellanox ? What about Mellanox HCA provided by HP? In my system I have HCA from HP with 409376-B21 P/N: cat /sys/class/infiniband/mthca0/board_id HP_0060000001 cat /sys/class/infiniband/mthca0/fw_ver 4.7.400 cat /sys/class/infiniband/mthca0/hw_rev a0 cat /sys/class/infiniband/mthca0/hca_type MT25208 (MT23108 compat mode) cat /sys/class/infiniband/mthca0/node_desc HP Lion Cub DDR 128MB Also I see mesages from boot modules: ib_mthca : HCA FW version 4.7.400 is old (4.7.600 is current). ib_mthca : If you have problems, try updating your HCA FW. uname -rm 2.6.18 x86_64 lspci InfiniBand: Mellanox Technologies MT25208 InfiniHost III Ex (Tavor compatibility mode) (rev 20) Thanx. _______________________________________________ general mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
