I was using default netperf params, throughput is stable now that I use -- -s 349520 -S 349520 -m 65536 to force socket buffer and message sizes.
Scott > -----Original Message----- > From: Or Gerlitz [mailto:[EMAIL PROTECTED] > Sent: Thursday, April 12, 2007 4:54 AM > To: Moni Shoua > Cc: Scott Weitzenkamp (sweitzen); Moni Levy; > [EMAIL PROTECTED]; openib; Pnina Bruskin > Subject: Re: [ewg] questions about OFED 1.2 IPoIB bonding > > Moni Shoua wrote: > > Scott Weitzenkamp (sweitzen) wrote: > > >> 1) IPoIB bonding and IPoIB CM do seem to work together, but after > >> running ib-bond --bond-ip, I have to manually reconfigure > IPoIB CM (both > >> mode and mtu) again, then increase the bond0 mtu. It > would be nice if > >> ib-bond took care of this for me. > > > I haven't had a chance yet to test bonding with IPoIB-CM. > I'll look into it and try to > > fix what's needed. > > I have tried this (bonding ipoib devices whose mode is > connected and mtu > is 65520) and indeed the bond and slaves mtu becomes lower > but the mode > does not change. > > >> 5) I've seen some erratic throughput with netperf using bond0 (no > >> failover happening), have you seen this? For example: > > > Can you add please more details about the test environment? > OS, ARCH, HW, etc... > > can you provide the exact --netperf command line-- you were using. > > thanks, > > Or. > _______________________________________________ general mailing list [EMAIL PROTECTED] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
