Chevchenkovic Chevchenkovic wrote:
Hi,
I had this problem. I had the following configuration problem:
node 1 : port 1 : LMC = 1 , LIDs = 12,13
node 2 : port 1 : LMC = 1 , LIDs = 18,19
Now when I run the read_bw test with the lids set as 12 and 18, the
test runs fine with no errors. But if I set the value to 13 and 19 , I
get an error in execution. The error is in completion queue.
How do i get over this?
How do you "tell" the test to use the LMC value?
(i have a tip: when the extra LIDs (which were given to the port due to
the LMC) are being used,
src_path_bits needs to be set as well).
thanks
Dotan
_______________________________________________
general mailing list
[email protected]
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
