Michael S. Tsirkin wrote:
Quoting Pradeep Satyanarayana <[EMAIL PROTECTED]>:
Subject: Re: IPOIB CM (NOSRQ)[PATCH V4] patch for review
Michael S. Tsirkin wrote:
Quoting Pradeep Satyanarayana <[EMAIL PROTECTED]>:
Subject: Re: IPOIB CM (NOSRQ)[PATCH V4] patch for review
If there are no other issues than the small restructure suggestion that
Michael had, can this patch be merged into the for-2.6.22 tree?
I'm not sure.
I haven't the time, at the moment, to go over the patch again in depth.
Have the issues from this message been addressed?
http://www.mail-archive.com/[email protected]/msg02056.html
Just a quick review, it seems that two most important issues have
apparently not been addressed yet:
1. Testing device SRQ capability twice on each RX packet is just too ugly,
and it *should* be possible to structure the code
by separating common functionality in separate
functions instead of scattering if (srq) tests around.
I have restructured the code as suggested. In the latest code, there are
only two places where SRQ capability is tested upon receipt of a packet:
a) ipoib_cm_handle_rx_wc()
b)ipoib_cm_post_receive()
Instead of the suggested change to ipoib_cm_handle_rx_packet() it is
possible to change ipoib_cm_post_receive() and call the srq and nosrq
versions directly, without mangling the code. However, I do not believe
that this should be stopping us from the code being merged. This can
handled as a separate patch.
I actually suggested implementing separate poll routines
for srq and non-srq code. This way we won't have *any* if(srq)
tests on datapath.
Right, I remember you suggested that. From a maintainability perspective
I use as much common code as possible. Therefore I did not implement
separate polling routines as suggested. So, it boils down to one if(srq)
in the data path. I really do not think that should be a point of
contention.
2. Once the number of created connections exceeds
the constant that you allow, all attempts to communicate
with this node over IP over IB will fail.
A way needs to be designed to switch to the datagram mode,
and to retry going back to connected after some time.
[We actually have this theoretical issue in SRQ
as well - it is just much more severe in the nonSRQ case].
Firstly, this has now been changed to send a REJ message to the remote
side indicating that there no more free QPs.
Since the HCA actually has free QPs - you are actually running out of buffers
that
you are ready to prepost - one might argue about whether this is spec compliant
behaviour. This is something that might better be checked up with at IBTA.
It is up to the application
to handle the situation.
The application here being kernel IP over IB here, it currently handles the
reject by dropping outstanding packets and retrying the connection on the next
packet to this dst. So the specific node might be denied connectivity
potentially forever.
When I stated application, I did not mean IPoIB. I meant the user level
app. Yes, the app will keep on retrying to establish connection to the
specified node using Connected Mode and then subsequently time out.
See more comments below.
Previously, this was flagged as an error that
appeared in /var/log/messages.
However, here are a few other things we need to consider. Lets us
compute the amount of memory consumed when we run into this situation:
In CM mode we use 64K packets. Assuming, the rx_ring has 256 entries and
the current limitation of 1024 QPs, NOSRQ only will consume 16GB of
memory. All else remaining the same if we change the rx_ring size to
1024, NOSRQ will consume 64GB of memory.
This is huge and my guess is that on most systems, the application will
run out of memory before it runs out of RC QPs (with NOSRQ).
Aside from this I would like to understand how do we switch just the
"current" QP to datagram mode; we would not want to switch all the
existing QPs to datagram mode -that would be unacceptable. Also, we
should not prevent subsequent connections using RC QPs. Is there
anything in the IB spec about this?
Yes, this might need a solution at the protocol level, as you indicate above.
I thought through this some more and I do not believe that this is such
a good idea (i.e. switching to datagram mode). The app (user level) is
expecting to use RC and we silently (or even with warnings) switch to
UD mode -I do not think that is appropriate.
The app should time out or be returned an error and maybe the app can
switch to using another node that has the requested resources. The onus
is on the user level app to take appropriate action.
The equivalent situation in a non IB environment would be when the
recipient node has no more memory to respond to an arp request. The
app receives a "node unreachable" message. Therefore I am inclined
to say we should leave this as is.
I think solving this is a fairly big issue and not just specific to
NOSRQ. NOSRQ is just exacerbating the situation. This can be dealt with
all at once with SRQ and NOSRQ, if need be.
IMO, the memory scalability issue is specific to your code.
With current code using shared RQ, each connection needs
an order of 1KByte of memory. So we need just 10MByte
for a typical 10000 node cluster.
Right, I have always maintained that NOSRQ is indeed a memory hog. I
think we must revisit this memory computation for the srq case too -
I would say the receive buffers consumed would be 64K (packet size) *
1000 (srq_ring_size) is 64MBytes, irrespective of the number of the
number of nodes in the cluster. However, the question that is still
unanswered (at least in my mind) is, will 1000 buffers be sufficient
to support a 10,000 or even a 1000 node cluster. On just a 2 node
cluster (using UD) we had seen previously that a receiveq_size of 256
was inadequate. I would guess even in the SRQ case that would be true.
To support large clusters one will run into memory issues even in the
SRQ case, but it will occur much sooner in the NOSRQ case.
Hence, I do not see these as impediments to the merge.
In my humble opinion, we need a handle on the scalability issue
(other than crashing or denying service) before merging this,
otherwise IBM will be the first to object to making connected mode the default.
I will seek the opinion from folks who use applications on large
clusters within IBM. I have always stated that NOSRQ should be used
only when there are a handful or at most a few dozen clusters. I will
try and make this well known so that this does not come as a surprise.
Pradeep
_______________________________________________
general mailing list
[email protected]
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
