Hi all,
I'm testing the SRP HA functions, but I have some questions. I use 2 IB cables to connect the initiator and 1 IB cables to connect to the storage. I installed the OFED-1.2, enable the "SRP_LOAD=yes" and "SRPHA_ENABLE=yes" in openib.conf. After reboot, it discovers 2 targets /dev/sdbX and /dev/sdcX. However, I check the /var/log/srp_daemon.log, it shows: .. 26/05/07 17:42:57 : bad MAD status (110) from lid 257 26/05/07 17:43:30 : No response to inform info registration 26/05/07 17:43:30 : Fail to register to traps, maybe there is no opensm running on fabric .. But the opensm is running in both machines. I don't know whether it is normal, or should it only discover a single target? Now, my question is that if I mount the /dev/sdbX and write data to it, and then remove 1 of the initiator cable, how the /dev/sdcX will replace the /dev/sdbX so that I can continue to write the data? Do I need to configure some extra files? Thanks for reply. PN
_______________________________________________ general mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
