On 8/3/07, Stanley Sufficool <[EMAIL PROTECTED]> wrote: > I am trying to get opensm to manage two separate subnets, one per IB port on > an Infinihost II PCIe HCA. I can specify PORT=1 and opensmd will start > without error. On the second sm management node, I start with PORT=2 in > opensm.conf and opensm fails with a timeout error.
Not sure what PORT is but you can start OpenSM on a specific port by using the -g (or -guid) option. Something like: opensm -g=0x12345678 where 0x12345678 is the port (not node) GUID > I am using Gentoo Linux with the mlx HCA and MAD, UMAD, etc... built into > kernel 2.6.20. > > My goal is to get ipoib working. IPoIB is being flakey with duplicated > ethernet MAC addresses ( MAC: 02:00:00:00:01 & :02 ) . This may be resolved > when opensm is working? IPoIB won't work until the ports are brought up by the SM. Not sure about the duplicated MACs. I don't understand this. -- Hal > I am also hoping to get SRP with Windows initiators and a Linux target using > the SRPT kernel module. But failing that, I will regress to iSCSI with hopes > of a future iSER target/initiator support. > _______________________________________________ > general mailing list > general@lists.openfabrics.org > http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general > > To unsubscribe, please visit > http://openib.org/mailman/listinfo/openib-general > _______________________________________________ general mailing list general@lists.openfabrics.org http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
