Hi,
ehca spits out a lot of debugging information. I had to look closely to
see the "Port 1 is not active" message within all the debug:
eHCA Infiniband Device Driver (Rel.: SVNEHCA_0022)
eHCA scaling code enabled
ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_define_sqp Port 1 is not active.
ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_create_qp ehca_define_sqp()
failed rc=ffffffffffffffff
ib_mad: Couldn't create ib_mad QP1
ib_mad: Couldn't open ehca0 port 1
ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_alloc_fmr unsupported
fmr_attr->page_shift=9
ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_alloc_fmr rc=ffffffffffffffea
pd=c000000b4b5b2420 mr_access_flags=7 fmr_attr=c0000005afd37394
fmr_create failed for FMR 0
Remove a few debug statements so that things are clearer:
eHCA Infiniband Device Driver (Rel.: SVNEHCA_0022)
eHCA scaling code enabled
ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_define_sqp Port 1 is not active.
ib_mad: Couldn't create ib_mad QP1
ib_mad: Couldn't open ehca0 port 1
ehca D.001.DQDXYCB-P1-C9: PU0006 EHCA_ERR:ehca_alloc_fmr unsupported
fmr_attr->page_shift=9
fmr_create failed for FMR 0
Signed-off-by: Anton Blanchard <[EMAIL PROTECTED]>
---
diff --git a/drivers/infiniband/hw/ehca/ehca_mrmw.c
b/drivers/infiniband/hw/ehca/ehca_mrmw.c
index c1b868b..57e3420 100644
--- a/drivers/infiniband/hw/ehca/ehca_mrmw.c
+++ b/drivers/infiniband/hw/ehca/ehca_mrmw.c
@@ -848,10 +848,6 @@ struct ib_fmr *ehca_alloc_fmr(struct ib_pd *pd,
alloc_fmr_exit1:
ehca_mr_delete(e_fmr);
alloc_fmr_exit0:
- if (IS_ERR(ib_fmr))
- ehca_err(pd->device, "rc=%lx pd=%p mr_access_flags=%x "
- "fmr_attr=%p", PTR_ERR(ib_fmr), pd,
- mr_access_flags, fmr_attr);
return ib_fmr;
} /* end ehca_alloc_fmr() */
diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c
b/drivers/infiniband/hw/ehca/ehca_qp.c
index b178cba..448f6b3 100644
--- a/drivers/infiniband/hw/ehca/ehca_qp.c
+++ b/drivers/infiniband/hw/ehca/ehca_qp.c
@@ -712,8 +712,6 @@ static struct ehca_qp *internal_create_qp(
if (qp_type == IB_QPT_GSI) {
h_ret = ehca_define_sqp(shca, my_qp, init_attr);
if (h_ret != H_SUCCESS) {
- ehca_err(pd->device, "ehca_define_sqp() failed rc=%lx",
- h_ret);
ret = ehca2ib_return_code(h_ret);
goto create_qp_exit4;
}
_______________________________________________
general mailing list
[email protected]
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
