Hi Anton, [EMAIL PROTECTED] wrote on 29.08.2007 15:42:53:
> > Hi, > > While debugging an ib_ehca issue I ended up with raw hcalls in dmesg: > > PU0003 EHCA_ERR:ehca_plpar_hcall9 opcode=168 ret=ffffffffffffffd3 > arg1=103d001403000002 arg2=203d0000000000a1 arg3=8a40000000000000 > arg4=5a5b4c000 arg5=0 arg6=0 arg7=0 arg8=0 arg9=0 out1=0 out2=0 > out3=0 out4=2 out5=0 out6=800000000005f254 out7=0 out8=0 out9=0 > We don't think this is the right approach to just remove these warnings, they are there for a good reason. It's the same place used by all mainline operatins which return good return codes in "normal life". Startup is the only time when this is a bit too chatty. At the moment ib_mad just breaks the complete adapter if one port is not active. I would suggest to define IB startup sequence which only uses ports that are active in ib_mad instead. Gruss / Regards Christoph Raisch _______________________________________________ general mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
