Never mind... spoke too soon... it was a shared lib issue. On 9/5/07, Chris Worley <[EMAIL PROTECTED]> wrote: > Some of those changes for icc don't make sense. Setting "CC" to "icc > -i-dynamic" looks for an executable file name of the entire string... > causing: > > Configuring MVAPICH2... > Configuring MPICH2 version MVAPICH2-0.9.8 with > --prefix=/var/tmp/OFED/usr/ofed/1.2.5/mpi/intel/mvapich2-0.9.8-15 > --with-device=osu_ch3:mrail --with-rdma=gen2 --with-pm=mpd > --enable-romio --enable-sharedlibs=gcc --without-mpe > sourcing /var/tmp/OFEDRPM/BUILD/mvapich2-0.9.8/src/pm/mpd/setup_pm > checking for gcc... icc -i-dynamic > checking for C compiler default output file name... configure: error: > C compiler cannot create executables > See `config.log' for more details. > Configuring MPICH2 version MVAPICH2-0.9.8 with > --prefix=/var/tmp/OFED/usr/ofed/1.2.5/mpi/intel/mvapich2-0.9.8-15 > --with-device=osu_ch3:mrail --with-rdma=gen2 --with-pm=mpd > --enable-romio --enable-sharedlibs=gcc --without-mpe > sourcing /var/tmp/OFEDRPM/BUILD/mvapich2-0.9.8/src/pm/mpd/setup_pm > checking for gcc... icc -i-dynamic > checking for C compiler default output file name... configure: error: > C compiler cannot create executables > > Is there a good way to fix this? > > Thanks, > > Chris > > > On 2/10/07, Shaun Rowland <[EMAIL PROTECTED]> wrote: > > I updated the latest MVAPICH2 SRPM: > > > > https://www.openfabrics.org/~rowland/ofed_1_2/ > > > > I am including a patch to the latest ofed_1_2_scripts git files. Since > > these files are the same as those used in the OFED-1.2-20070208-1508.tgz > > package, this patch can also be applied there. This patch is required to > > use the new MVAPICH2 SRPM file and should not be used with the older > > versions. > > > > I've done the following: > > > > - Updated some of the dependencies when mvapich2 is selected. > > > > - Added new mvapich2 configuration prompts if mvapich2 is selected. > > This is all contained within the mvapich2_config shell function. These > > values are stored in the configuration file, etc. and prefixed with > > MVAPICH2_CONF_. > > > > There are two implementation choices for the MVAPICH2 build: OFA and > > uDAPL. The OFA build should allow IB, IB + RDMA-CM, and iWARP to be > > used. The mode is controlled by the following runtime environment variables: > > > > IB > > -- > > No additional environment variable required (default case). > > > > IB + RDMA-CM > > ------------ > > MV2_USE_RDMA_CM=1 > > > > iWARP > > ----- > > MV2_ENABLE_IWARP_MODE=1 > > > > -- > > Shaun Rowland [EMAIL PROTECTED] > > http://www.cse.ohio-state.edu/~rowland/ > > > > diff --git a/build.sh b/build.sh > > index 5eafb0d..c5f996c 100755 > > --- a/build.sh > > +++ b/build.sh > > @@ -448,18 +448,25 @@ mvapich() > > > > mvapich2() > > { > > - local iwarp=0 > > - > > - if [ "$MVAPICH2_IMPL" = "iwarp" ]; then > > - iwarp=1 > > - fi > > - > > - echo > > + if [ $MVAPICH2_CONF_impl = "ofa" ]; then > > + echo "Building the MVAPICH2 RPM in the OFA configuration. Please > > wait..." > > + elif [ $MVAPICH2_CONF_impl = "udapl" ]; then > > + echo "Building the MVAPICH2 RPM in the uDPAL configuration. Please > > wait..." > > + if [ -d ${BUILD_ROOT}${STACK_PREFIX}/lib64 ]; then > > + MVAPICH2_DAT_LIB=${STACK_PREFIX}/lib64 > > + elif [ -d ${BUILD_ROOT}${STACK_PREFIX}/lib ]; then > > + MVAPICH2_DAT_LIB=${STACK_PREFIX}/lib > > + else > > + echo "Could not find a proper uDAPL lib directory." > > + return 1 > > + fi > > > > - if [ $iwarp -eq 0 ]; then > > - echo "Building the MVAPICH2 RPM with IB support. Please wait..." > > - else > > - echo "Building the MVAPICH2 RPM with iWARP support. Please wait..." > > + if [ -d ${BUILD_ROOT}${STACK_PREFIX}/include ]; then > > + MVAPICH2_DAT_INCLUDE=${STACK_PREFIX}/include > > + else > > + echo "Could not find a proper uDAPL include directory." > > + return 1 > > + fi > > fi > > > > echo > > @@ -484,7 +491,7 @@ mvapich2() > > > > # On i686 the PathScale compiler requires -g optimization > > # for MVAPICH2 in the shared library configuration. > > - if [ "$ARCH" = "i686" ]; then > > + if [ "$ARCH" = "i686" ] && [ $MVAPICH2_CONF_shared_libs > > -eq 1 ]; then > > MVAPICH2_COMP_ENV="$MVAPICH2_COMP_ENV OPT_FLAG=-g" > > fi > > ;; > > @@ -492,25 +499,73 @@ mvapich2() > > MVAPICH2_COMP_ENV="CC=pgcc CXX=pgCC F77=pgf77 F90=pgf90" > > ;; > > intel) > > - # The -i-dynamic flag is required for MVAPICH2 in the > > shared > > - # library configuration. > > - MVAPICH2_COMP_ENV='CC="icc -i-dynamic" CXX="icpc > > -i-dynamic" F77="ifort -i-dynamic" F90="ifort -i-dynamic"' > > + if [ $MVAPICH2_CONF_shared_libs -eq 1 ]; then > > + # The -i-dynamic flag is required for MVAPICH2 in the > > shared > > + # library configuration. > > + MVAPICH2_COMP_ENV='CC="icc -i-dynamic" CXX="icpc > > -i-dynamic" F77="ifort -i-dynamic" F90="ifort -i-dynamic"' > > + else > > + MVAPICH2_COMP_ENV="CC=icc CXX=icpc F77=ifort F90=ifort" > > + fi > > ;; > > esac > > > > - ex rpmbuild --rebuild \ > > - --define \'_topdir ${RPM_DIR}\' \ > > - --define \'_name ${MVAPICH2_NAME}_${mpi_comp}\' \ > > - --define \'_prefix ${MVAPICH2_PREFIX}\' \ > > - --define \'build_root ${BUILD_ROOT}\' \ > > - --define \'open_ib_home ${STACK_PREFIX}\' \ > > - --define \'ofed_build_root ${BUILD_ROOT}\' \ > > - --define \'comp_env ${MVAPICH2_COMP_ENV}\' \ > > - --define \'iwarp ${iwarp}\' \ > > - --define \'romio 1\' \ > > - --define \'shared_libs 1\' \ > > - --define \'auto_req 1\' \ > > - $MVAPICH2_SRC_RPM > > + if [ $MVAPICH2_CONF_impl = "ofa" ] && [ $MVAPICH2_CONF_ckpt -eq 0 > > ]; then > > + ex rpmbuild --rebuild \ > > + --define \'_topdir ${RPM_DIR}\' \ > > + --define \'_prefix ${MVAPICH2_PREFIX}\' \ > > + --define \'_name ${MVAPICH2_NAME}_${mpi_comp}\' \ > > + --define \'build_root ${BUILD_ROOT}\' \ > > + --define \'impl ofa\' \ > > + --define \'multithread ${MVAPICH2_CONF_multithread}\' \ > > + --define \'romio ${MVAPICH2_CONF_romio}\' \ > > + --define \'shared_libs ${MVAPICH2_CONF_shared_libs}\' \ > > + --define \'rdma_cm 1\' \ > > + --define \'ckpt 0\' \ > > + --define \'open_ib_home ${STACK_PREFIX}\' \ > > + --define \'comp_env ${MVAPICH2_COMP_ENV}\' \ > > + --define \'auto_req 0\' \ > > + --define \'ofa_build 1\' \ > > + $MVAPICH2_SRC_RPM > > + elif [ $MVAPICH2_CONF_impl = "ofa" ] && [ $MVAPICH2_CONF_ckpt -eq > > 1 ]; then > > + ex rpmbuild --rebuild \ > > + --define \'_topdir ${RPM_DIR}\' \ > > + --define \'_prefix ${MVAPICH2_PREFIX}\' \ > > + --define \'_name ${MVAPICH2_NAME}_${mpi_comp}\' \ > > + --define \'build_root ${BUILD_ROOT}\' \ > > + --define \'impl ofa\' \ > > + --define \'multithread 0\' \ > > + --define \'romio ${MVAPICH2_CONF_romio}\' \ > > + --define \'shared_libs ${MVAPICH2_CONF_shared_libs}\' \ > > + --define \'rdma_cm 0\' \ > > + --define \'ckpt 1\' \ > > + --define \'blcr_home ${MVAPICH2_CONF_blcr_home}\' \ > > + --define \'open_ib_home ${STACK_PREFIX}\' \ > > + --define \'comp_env ${MVAPICH2_COMP_ENV}\' \ > > + --define \'auto_req 0\' \ > > + --define \'ofa_build 1\' \ > > + $MVAPICH2_SRC_RPM > > + elif [ $MVAPICH2_CONF_impl = "udapl" ]; then > > + ex rpmbuild --rebuild \ > > + --define \'_topdir ${RPM_DIR}\' \ > > + --define \'_prefix ${MVAPICH2_PREFIX}\' \ > > + --define \'_name ${MVAPICH2_NAME}_${mpi_comp}\' \ > > + --define \'build_root ${BUILD_ROOT}\' \ > > + --define \'impl udapl\' \ > > + --define \'multithread ${MVAPICH2_CONF_multithread}\' \ > > + --define \'romio ${MVAPICH2_CONF_romio}\' \ > > + --define \'shared_libs ${MVAPICH2_CONF_shared_libs}\' \ > > + --define \'vcluster ${MVAPICH2_CONF_vcluster}\' \ > > + --define \'io_bus ${MVAPICH2_CONF_io_bus}\' \ > > + --define \'link_speed ${MVAPICH2_CONF_link_speed}\' \ > > + --define \'dapl_provider ${MVAPICH2_CONF_dapl_provider}\' \ > > + --define \'dat_lib ${MVAPICH2_DAT_LIB}\' \ > > + --define \'dat_include ${MVAPICH2_DAT_INCLUDE}\' \ > > + --define \'comp_env ${MVAPICH2_COMP_ENV}\' \ > > + --define \'auto_req 0\' \ > > + --define \'ofa_build 1\' \ > > + $MVAPICH2_SRC_RPM > > + fi > > + > > ex "$MV -f ${RPM_DIR}/RPMS/$build_arch/${MVAPICH2_RPM} $RPMS" > > let BUILD_COUNTER++ > > > > diff --git a/build_env.sh b/build_env.sh > > index 3128774..93891b3 100644 > > --- a/build_env.sh > > +++ b/build_env.sh > > @@ -971,6 +971,226 @@ is_compiler() > > > > } > > > > +# Prompt for MVAPICH2 build options. > > +mvapich2_config() { > > + local choice="" > > + local blcr > > + > > + if [ "$MVAPICH2_CONF_done" = 1 ]; then > > + return > > + fi > > + > > + cat <<EOF > > + > > +Please choose an implementation of MVAPICH2: > > + > > +1) OFA (IB and iWARP) > > +2) uDAPL > > + > > +EOF > > + while [ -z "$choice" ] || [[ $choice != [0-9] ]] || [ $choice -lt 1 ] > > || [ $choice -gt 2 ]; do > > + read -p "Implementation [1]: " > > + choice=${REPLY:-1} > > + done > > + > > + if [ $choice -eq 1 ]; then > > + MVAPICH2_CONF_impl=ofa > > + elif [ $choice -eq 2 ]; then > > + MVAPICH2_CONF_impl=udapl > > + fi > > + > > + if ! ( grep -w MVAPICH2_CONF_impl $CONFIG > $NULL 2>&1 ); then > > + echo "MVAPICH2_CONF_impl=\"${MVAPICH2_CONF_impl}\"" >> $CONFIG > > + fi > > + > > + while [ -z "$MVAPICH2_CONF_romio" ]; do > > + read -p "Enable ROMIO support [Y/n]: " choice > > + > > + if [ -z "$choice" ] || [[ $choice == [yY] ]] || [[ $choice == > > [yY][eE][sS] ]]; then > > + MVAPICH2_CONF_romio=1 > > + elif [[ $choice == [nN] ]] || [[ $choice == [nN][oO] ]]; then > > + MVAPICH2_CONF_romio=0 > > + fi > > + done > > + > > + if ! ( grep -w MVAPICH2_CONF_romio $CONFIG > $NULL 2>&1 ); then > > + echo "MVAPICH2_CONF_romio=\"${MVAPICH2_CONF_romio}\"" >> $CONFIG > > + fi > > + > > + while [ -z "$MVAPICH2_CONF_shared_libs" ]; do > > + read -p "Enable shared library support [Y/n]: " choice > > + > > + if [ -z "$choice" ] || [[ $choice == [yY] ]] || [[ $choice == > > [yY][eE][sS] ]]; then > > + MVAPICH2_CONF_shared_libs=1 > > + elif [[ $choice == [nN] ]] || [[ $choice == [nN][oO] ]]; then > > + MVAPICH2_CONF_shared_libs=0 > > + fi > > + done > > + > > + if ! ( grep -w MVAPICH2_CONF_shared_libs $CONFIG > $NULL 2>&1 ); then > > + echo "MVAPICH2_CONF_shared_libs=\"${MVAPICH2_CONF_shared_libs}\"" > > >> $CONFIG > > + fi > > + > > + cat <<EOF > > +Multithread support should only be enabled only if thread safety is > > required. > > +There may be a slight performance penalty for single threaded only use. > > +EOF > > + > > + while [ -z "$MVAPICH2_CONF_multithread" ]; do > > + read -p "Enable multithread support [y/N]: " choice > > + > > + if [ -z "$choice" ] || [[ $choice == [nN] ]] || [[ $choice == > > [nN][oO] ]]; then > > + MVAPICH2_CONF_multithread=0 > > + elif [[ $choice == [yY] ]] || [[ $choice == [yY][eE][sS] ]]; then > > + MVAPICH2_CONF_multithread=1 > > + fi > > + done > > + > > + if ! ( grep -w MVAPICH2_CONF_multithread $CONFIG > $NULL 2>&1 ); then > > + echo "MVAPICH2_CONF_multithread=\"${MVAPICH2_CONF_multithread}\"" > > >> $CONFIG > > + fi > > + > > + # OFA specific options. > > + if [ $MVAPICH2_CONF_impl = "ofa" ] && [ $MVAPICH2_CONF_multithread -eq > > 0 ]; then > > + choice=0 > > + > > + while [ $choice = 0 ]; do > > + read -p "Enable Checkpoint-Restart support [y/N]: " choice > > + > > + if [ -z "$choice" ] || [[ $choice == [nN] ]] || [[ $choice == > > [nN][oO] ]]; then > > + MVAPICH2_CONF_ckpt=0 > > + choice=1 > > + elif [[ $choice == [yY] ]] || [[ $choice == [yY][eE][sS] ]]; > > then > > + read -p "BLCR installation directory [or nothing if not > > installed]: " blcr > > + > > + if [ -d "$blcr" ]; then > > + MVAPICH2_CONF_ckpt=1 > > + MVAPICH2_CONF_blcr_home="$blcr" > > + choice=1 > > + else > > + echo "BLCR installation directory not found." > > + choice=0 > > + fi > > + else > > + choice=0 > > + fi > > + done > > + else > > + MVAPICH2_CONF_ckpt=0 > > + fi > > + > > + if [ $MVAPICH2_CONF_impl = "ofa" ]; then > > + if ! ( grep -w MVAPICH2_CONF_ckpt $CONFIG > $NULL 2>&1 ); then > > + echo "MVAPICH2_CONF_ckpt=\"${MVAPICH2_CONF_ckpt}\"" >> $CONFIG > > + fi > > + > > + if [ $MVAPICH2_CONF_ckpt -eq 1 ]; then > > + if ! ( grep -w MVAPICH2_CONF_blcr_home $CONFIG > $NULL 2>&1 ); > > then > > + echo > > "MVAPICH2_CONF_blcr_home=\"${MVAPICH2_CONF_blcr_home}\"" >> $CONFIG > > + fi > > + fi > > + fi > > + > > + # uDAPL specific options. > > + if [ $MVAPICH2_CONF_impl = "udapl" ]; then > > + cat <<EOF > > + > > +Cluster size: > > + > > +1) Small > > +2) Medium > > +3) Large > > + > > +EOF > > + choice="" > > + > > + while [ -z "$choice" ] || [[ $choice != [0-9] ]] || [ $choice -lt > > 1 ] || [ $choice -gt 3 ]; do > > + read -p "Cluster size [1]: " > > + choice=${REPLY:-1} > > + done > > + > > + if [ $choice -eq 1 ]; then > > + MVAPICH2_CONF_vcluster=small > > + elif [ $choice -eq 2 ]; then > > + MVAPICH2_CONF_vcluster=medium > > + elif [ $choice -eq 3 ]; then > > + MVAPICH2_CONF_vcluster=large > > + fi > > + > > + if ! ( grep -w MVAPICH2_CONF_vcluster $CONFIG > $NULL 2>&1 ); then > > + echo "MVAPICH2_CONF_vcluster=\"${MVAPICH2_CONF_vcluster}\"" >> > > $CONFIG > > + fi > > + > > + cat <<EOF > > + > > +I/O Bus: > > + > > +1) PCI-Express > > +2) PCI-X > > + > > +EOF > > + choice="" > > + > > + while [ -z "$choice" ] || [[ $choice != [0-9] ]] || [ $choice -lt > > 1 ] || [ $choice -gt 2 ]; do > > + read -p "I/O Bus [1]: " > > + choice=${REPLY:-1} > > + done > > + > > + if [ $choice -eq 1 ]; then > > + MVAPICH2_CONF_io_bus=pci-ex > > + elif [ $choice -eq 2 ]; then > > + MVAPICH2_CONF_io_bus=pci-x > > + fi > > + > > + if ! ( grep -w MVAPICH2_CONF_io_bus $CONFIG > $NULL 2>&1 ); then > > + echo "MVAPICH2_CONF_io_bus=\"${MVAPICH2_CONF_io_bus}\"" >> > > $CONFIG > > + fi > > + > > + if [ $MVAPICH2_CONF_io_bus = "pci-ex" ]; then > > + cat <<EOF > > + > > +Link Speed: > > + > > +1) SDR > > +2) DDR > > + > > +EOF > > + choice="" > > + > > + while [ -z "$choice" ] || [[ $choice != [0-9] ]] || [ $choice > > -lt 1 ] || [ $choice -gt 2 ]; do > > + read -p "Link Speed [1]: " > > + choice=${REPLY:-1} > > + done > > + > > + if [ $choice -eq 1 ]; then > > + MVAPICH2_CONF_link_speed=sdr > > + elif [ $choice -eq 2 ]; then > > + MVAPICH2_CONF_link_speed=ddr > > + fi > > + else > > + MVAPICH2_CONF_link_speed=sdr > > + fi > > + > > + if ! ( grep -w MVAPICH2_CONF_link_speed $CONFIG > $NULL 2>&1 ); > > then > > + echo > > "MVAPICH2_CONF_link_speed=\"${MVAPICH2_CONF_link_speed}\"" >> $CONFIG > > + fi > > + > > + read -p "Default DAPL provider [ib0]: " > > + MVAPICH2_CONF_dapl_provider=${REPLY:-ib0} > > + > > + if ! ( grep -w MVAPICH2_CONF_dapl_provider $CONFIG > $NULL 2>&1 ); > > then > > + echo > > "MVAPICH2_CONF_dapl_provider=\"${MVAPICH2_CONF_dapl_provider}\"" >> $CONFIG > > + fi > > + fi > > + > > + MVAPICH2_CONF_done=1 > > + > > + if ! ( grep -w MVAPICH2_CONF_done $CONFIG > $NULL 2>&1 ); then > > + echo "MVAPICH2_CONF_done=\"${MVAPICH2_CONF_done}\"" >> $CONFIG > > + fi > > +} > > + > > + > > # Set Compilation environment for MPI > > set_mpi_env() > > { > > @@ -998,6 +1218,7 @@ set_mpi_env() > > echo > > fi > > > > + > > printed_msg0=${printed_msg0:-0} > > if [ $printed_msg0 -eq 0 ]; then > > if [ $(echo -n ${COMPILERS_FOUND} | wc -w) -gt 1 ]; then > > @@ -1014,24 +1235,8 @@ set_mpi_env() > > read -p "Do you wish to create/install an ${mpipackage} > > RPM with ${mpi_compiler}? [Y/n]:" ans > > if [[ "$ans" == "" || "$ans" == "y" || "$ans" == "Y" || > > "$ans" == "yes" ]]; then > > MPI_COMPILER="$MPI_COMPILER ${mpi_compiler}" > > - > > - # MVAPICH2 can be built with iWARP support only if > > - # librdmacm and librdmacm-devel are there. > > - if [ "$mpipackage" = "mvapich2" ] && > > - (echo -n ${SELECTED_PACKAGES} | grep -w "librdmacm" > > > $NULL) && > > - (echo -n ${SELECTED_PACKAGES} | grep -w > > "librdmacm-devel" > $NULL); then > > - read -p "Do you wish to build mvapich2 with iWARP > > support only (default is IB) [y/N]:" ans > > - if [[ "$ans" == "y" || "$ans" == "Y" || "$ans" == > > "yes" ]]; then > > - MVAPICH2_IMPL=iwarp > > - else > > - MVAPICH2_IMPL=ib > > - fi > > - else > > - MVAPICH2_IMPL=ib > > - fi > > fi > > done > > - > > else # Unattended mode > > case ${mpipackage} in > > mvapich) > > @@ -1095,18 +1300,17 @@ set_mpi_env() > > warn_echo "No compilers for ${mpipackage} were found" > > return 1 > > fi > > - > > MPI_COMPILER_mvapich2=${MPI_COMPILER} > > if ! ( grep -w MPI_COMPILER_mvapich2 $CONFIG > $NULL 2>&1 > > ); then > > echo > > "MPI_COMPILER_mvapich2=\"${MPI_COMPILER_mvapich2}\"" >> $CONFIG > > fi > > - > > - if ! ( grep -w MVAPICH2_IMPL $CONFIG > $NULL 2>&1 ); then > > - echo "MVAPICH2_IMPL=\"${MVAPICH2_IMPL}\"" >> $CONFIG > > - fi > > - > > echo > > echo "The following compiler(s) will be used to > > ${prog%*.*} the ${mpipackage} RPM(s): $MPI_COMPILER_mvapich2" > > + # MVAPICH2 can be built with many options. The > > configuration > > + # function below asks the user how to build, and it only > > will > > + # do so if the configuration values have not already been > > + # read from the $CONFIG file. > > + mvapich2_config > > ;; > > openmpi) > > if [ ! -n "${COMPILERS_FOUND}" ]; then > > @@ -1843,10 +2047,18 @@ set_package_deps() > > export mvapich2=n > > else > > EXTRA_PACKAGES=$(echo "$EXTRA_PACKAGES > > mvapich2" | tr -s ' ' '\n' | sort -rn | uniq) > > - if [ "$MVAPICH2_IMPL" = "iwarp" ]; then > > - OFA_PACKAGES=$(echo "$OFA_PACKAGES > > libibverbs libibverbs-devel libibumad libibumad-devel librdmacm > > librdmacm-devel" | tr -s ' ' '\n' | sort -n | uniq) > > - else > > - OFA_PACKAGES=$(echo "$OFA_PACKAGES > > libibverbs libibverbs-devel libibumad libibumad-devel" | tr -s ' ' '\n' | > > sort -n | uniq) > > + if [ "$MVAPICH2_CONF_impl" = "ofa" ] && [ > > "$MVAPICH2_CONF_ckpt" = 0 ]; then > > + # libibumad apparently needs > > libibcommon. > > + OFA_PACKAGES=$(echo "$OFA_PACKAGES > > libibverbs libibverbs-devel libibumad libibumad-devel librdmacm > > librdmacm-devel libibcommon libibcommon-devel" | tr -s ' ' '\n' | sort -n | > > uniq) > > + elif [ "$MVAPICH2_CONF_impl" = "ofa" ]; > > then > > + # Checkpoint-Restart does not support > > + # RDMA-CM, so it would not be required. > > + # libibumad apparently needs > > libibcommon. > > + OFA_PACKAGES=$(echo "$OFA_PACKAGES > > libibverbs libibverbs-devel libibumad libibumad-devel libibcommon > > libibcommon-devel" | tr -s ' ' '\n' | sort -n | uniq) > > + elif [ "$MVAPICH2_CONF_impl" = "udapl" ]; > > then > > + # dapl apparently needs libibverbs and > > + # librdmacm. > > + OFA_PACKAGES=$(echo "$OFA_PACKAGES > > dapl dapl-devel libibverbs librdmacm" | tr -s ' ' '\n' | sort -n | uniq) > > fi > > fi > > ;; > > diff --git a/install.sh b/install.sh > > diff --git a/ofed-scripts.spec b/ofed-scripts.spec > > diff --git a/propel.sh b/propel.sh > > diff --git a/uninstall.sh b/uninstall.sh > > > > _______________________________________________ > > openib-general mailing list > > [EMAIL PROTECTED] > > http://openib.org/mailman/listinfo/openib-general > > > > To unsubscribe, please visit > > http://openib.org/mailman/listinfo/openib-general > > > _______________________________________________ general mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
