Does "lsmod | grep sdp" report SDP is loaded on both machines?
I would then use strace with the client to watch the socket system calls
happening, to make sure the client is trying to use SDP.
Scott
________________________________
From: Zulfi Imani [mailto:[EMAIL PROTECTED]
Sent: Friday, October 05, 2007 4:25 PM
To: Scott Weitzenkamp (sweitzen)
Cc: [EMAIL PROTECTED]; [email protected]
Subject: Re: [ofa-general] Problem running SDP apps using OFED
1.2
I restarted openibd and now my interfaces are up.
mach#1
ib0 Link encap:InfiniBand HWaddr
80:00:00:02:FE:80:00:00:00:00:00:00:00:00:00:00:00:00:00:00
inet addr:140.221.37.46 Bcast:140.221.37.255
Mask:255.255.255.0
inet6 addr: fe80::211:7500:ff:d7f2/64 Scope:Link
mach#2
ib0 Link encap:InfiniBand HWaddr
80:00:00:03:FE:80:00:00:00:00:00:00:00:00:00:00:00:00:00:00
inet addr:140.221.37.32 Bcast:140.221.37.255
Mask:255.255.255.0
inet6 addr: fe80::211:7500:ff:d802/64 Scope:Link
I am able to "ping 140.221.37.46" from machine#2.
mach#2 > ping 140.221.37.46
PING 140.221.37.46 (140.221.37.46) 56(84) bytes of data.
64 bytes from 140.221.37.46: icmp_seq=1 ttl=64 time=2.49 ms
64 bytes from 140.221.37.46: icmp_seq=2 ttl=64 time=0.106 ms
64 bytes from 140.221.37.46: icmp_seq=3 ttl=64 time=0.098 ms
--- 140.221.37.46 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
rtt min/avg/max/mdev = 0.098/0.900/2.498/1.130 ms
But sockets over SDP still gives me the same "Network
Unreachable error".
--- 140.221.37.46 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
rtt min/avg/max/mdev = 0.098/0.900/2.498/1.130 ms
On 10/5/07, Scott Weitzenkamp (sweitzen) <[EMAIL PROTECTED]>
wrote:
Can you ping between the two nodes using the IPoIB IP
address?
Scott Weitzenkamp
SQA and Release Manager
Server Virtualization Business Unit
Cisco Systems
________________________________
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Zulfi Imani
Sent: Friday, October 05, 2007 3:01 PM
To: [EMAIL PROTECTED]
Cc: [email protected]
Subject: Re: [ofa-general] Problem running SDP
apps using OFED 1.2
Hi Dotan,
ifconfig shows up
ib0 Link encap:InfiniBand HWaddr
80:00:00:03:FE:80:00:00:00:00:00:00:00:00:00:00:00:00:00:00
inet addr: 140.221.37.32 Bcast:
140.221.37.255 <http://140.221.37.255> Mask:255.255.255.0
inet6 addr: fe80::211:7500:ff:d802/64
Scope:Link
UP BROADCAST RUNNING MULTICAST
MTU:65520 Metric:1
RX packets:0 errors:0 dropped:0
overruns:0 frame:0
TX packets:1 errors:0 dropped:5
overruns:0 carrier:0
collisions:0 txqueuelen:128
RX bytes:0 (0.0 b) TX bytes:68 (68.0
b)
does this mean that the apps would now use IPoIB
? How do i tell when IPoIB is working and when it isnt ? Because I
assume when it isnt it would default to Ethernet ?
It will be great if I can get this cleared.
Thanks
Zulfi
On 9/30/07, Dotan Barak <
[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > wrote:
Does a simple "ping" between the nodes
is working?
(this way you can be sure that IPoIB is
working and SDP should work)
Dotan
Zulfi Imani wrote:
> I have not tried over IPoIB, but
opensm is running
>
> /home/zulfi > sminfo
> sminfo: sm lid 1 sm guid
0x11750000ffdaf4, activity count 16220
> priority 0 state 3 SMINFO_MASTER
>
> I also tried a few iband utilities and
they all work fine. Not able to
> run any socket apps over SDP.
>
> Thanks
> Zulfi
>
> On 9/27/07, *Jim Mott* <
[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
> <mailto:[EMAIL PROTECTED]>> wrote:
>
> Were you able to connect IPoIB
between the nodes? Are you sure
> opensm was running? I am ashamed
to admit that occasionally I
> forget to start opensm and wonder
why SDP does not connect.
>
>
>
> *From:*
[EMAIL PROTECTED]
> <mailto:
[EMAIL PROTECTED]> [mailto:
>
[EMAIL PROTECTED]
>
<mailto:[EMAIL PROTECTED]>] *On Behalf Of
> *Zulfi Imani
> *Sent:* Thursday, September 27,
2007 3:22 PM
> *To:*
[email protected]
> <mailto:
[email protected] <mailto:[email protected]> >
> *Subject:* [ofa-general] Problem
running SDP apps using OFED 1.2
>
>
>
> Hi,
>
> I installed the OFED1.2 stack and
am trying to run a simple socket
> server and client over the SDP
stack. The Infiniband hardware is
> QLogic.
>
> First I set the ENV vars
> export
LD_PRELOAD=/root/zulfi/iband/INSTALL/lib64/libsdp.so
>
> export
LIBSDP_CONFIG_FILE=/home/zulfi/libsdp.conf
>
>
> The SDP config file has:
> *use sdp server * *:*
> use sdp client * *:*
> *
> Then started the socket server and
did a 'sdpnetstat -San' and
> found that it listed the SDP port
on which the server was listening.
>
> On the client machine too I did
the same; exported the variables,
> setup the SDP config file and on
running the client './client
> port# server_machine' it gave me a
"network not reachable" error.
>
> I tried to get some information
about the error on the net but
> could not find any.
>
> I then checked the
/proc/<pid>/maps file and found that libsdp.so
> was being loaded.
> also:
> /root > lsmod | grep sdp
> ib_sdp 120224 3
>
> Does QLogic support SDP
applications ? Or am I missing something
> in the SDP config file or do I
need to make changes to my code ?
>
> Any information on this will be a
big help.
>
> Thanks,
> Zulfi
>
>
>
>
>
>
> --
> Regs,
> Zulfi
>
------------------------------------------------------------------------
>
>
_______________________________________________
> general mailing list
> [email protected]
>
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
>
> To unsubscribe, please visit
http://openib.org/mailman/listinfo/openib-general
--
Regs,
Zulfi
--
Regs,
Zulfi
_______________________________________________
general mailing list
[email protected]
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
