Hi Yevgeny, On 15:04 Mon 19 Nov , Yevgeny Kliteynik wrote: > This patch adds simplified syntax for QoS definition in QoS Policy file. > Using this syntax the administrator is able to define QoS policy per > ULP and/or per Service ID and/or per partition (pkey). > > Here's an example of the policy file with the new syntax, which is added > in a new section called qos-policy: > > qos-ulps > sdp, port-num 30000 : 1 #SL for SDP when destination > port is 30000 > sdp, port-num 10000-20000, 0xfffd : 2 > sdp : 0 #default SL for SDP > srp, target-port-guid 0x1234-0x1235 : 2 > iser, port-num 0x3234-0x3235 : 4 #SL for iSER whith specific > target ports > iser : 5 #default SL for iSER > rds, port-num 25000 : 2 #SL for RDS when destination > port is 25000 > rds : 0 #default SL for RDS > ipoib, pkey 0x0001 : 5 #SL for IPoIB on partition > with pkey 0x0001 > ipoib : 6 #default IPoIB partition - > pkey=0x7FFF > any, pkey 0x0ABC : 3 > any, pkey 0x0ABD-0x0ABF,0x0BBD-0x0BBA : 4 > any, service-id 0x6234 : 2 > any, target-port-guid 0x2234-0xF235 : 2 > default : 0 #default SL > end-qos-ulps > > Since any section of the policy file is optional as long as basic rules > of the file are kept, the above example can serve as a complete QoS > policy file - short and clear.
I think it could be good idea to add to opensm/doc|man some paper which describes QoS setup in details. Sasha _______________________________________________ general mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
