Hello Roland, On Wednesday 28 November 2007 00:28:08 Roland Dreier wrote: > > Yes exactly and reproducable on all 6 nodes with connectX presently here > > in our test lab. > > Just by accident I first always had connected port 2. Shortly before I > > already thought it doesn't work at all, I tried the other port... > > Sorry for the slow reply. I just swapped cables on one of my test
thanks for your help and thanks a lot for testing it yourself. No problem it took some time, we are presently also fighting a countless number of hardware and software bugs. This dual port problem actually has a low priority. > systems, and IPoIB works fine for me on port 2 of my ConnectX HCA. > This is with the kernel around 2.6.24-rc1 that happens to be running > there. So I'm not sure what's different about your system. > > I would suggest raising this with your HCA vendor since perhaps you > have a bad batch of HCAs or old firmware or something. So we know its either a problem with 2.6.22 or a hardware problem. I will test 2.6.24-rc1 during the next days and keep you posted. Thanks again, Bernd -- Bernd Schubert Q-Leap Networks GmbH _______________________________________________ general mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
