On Mon, 2007-12-03 at 11:21 -0800, Sufficool, Stanley wrote: > I have specified the initiator and target GUID in the group membership > as to isolate initiators to specific target ports and I get no > connections. However when I leave this as Default group and check the > initiator port using OSMTEST for WinIB, I get a port is is 1 higher > than that reported by /proc/scst_tgt/sessions: > > WinIB osmtest: > 1: GUID = 0x1708ffffd0dd61, lid = 0x0008, state = ACTIVE > 2: GUID = 0x1708ffffd0dd62, lid = 0x0011, state = ACTIVE > > SCST Session: > Target name Initiator name Group name > Command Count > ib_srpt 0x001a4bffff0cd045001708ffffd0dd60 Default > 0
It's likely the difference between node and port GUID that you are seeing. > Is it safe to assume the session (SCST Group USER) will always be one > less than the initiator port id? It is a common convention but not all vendors use it and it is _not_ guaranteed to work per IBA. -- Hal > The OFED target code seems to be current (git reports no updates). > > > _______________________________________________ > general mailing list > [email protected] > http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general > > To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general _______________________________________________ general mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
