Mellanox site has instructions on identifying the PSID of the card (
http://www.mellanox.com/support/HCA_FW_identification.php ) .
Once you get the correct chipset id, you should be able to update from
the Mellanox firmware.
http://www.mellanox.com/support/firmware_table_IH3Ex.php
However, your PSID will be reflashed to read as a Mellanox card unless
you use an OEM flash INI file instructions.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Chuck
Hartley
Sent: Tuesday, December 11, 2007 7:03 AM
To: [email protected]
Subject: [ofa-general] Cisco Topspin drivers available
Does anyone here know where I can find up to date drivers for
the Cisco Topspin HCAs? I tried the Cisco and IBM websites and the
drivers there are are least a year old and do not support any recent
kernels. We have an IBM QS21 blade running Fedora 7 (or possibly RHEL
5.1 soon) and need a driver for the HCA. The Cisco release notes say to
build the driver from the source tarball if you have a unsupported OS,
but there do not seem to be any tarballs on the images available for
download. Even though the HCA apparently uses a Mellanox chip, it is
not supported my the mthca driver. Here is what lspci says:
InfiniBand: Mellanox Technologies MT25208 InfiniHost III Ex
(Tavor compatibility mode) (rev a0)
Hopefully someone here is using one of these with a modern
kernel / distribution...
Thanks,
Chuck
_______________________________________________
general mailing list
[email protected]
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
