Hi Sean,
Did you get a chance to look at this issue?
https://bugs.openfabrics.org/show_bug.cgi?id=821
-- Yevgeny
Yevgeny Kliteynik wrote:
Sean Hefty wrote:
Not sure if it helps, but "ibv_rc_pingpong -l <any SL>" works.
I'll try this tomorrow.
With QoS enabled (using the QoS file provided in bug 821), I get a
ROUTE_ERROR on the client side, but I don't see a system hang. I'm
running 2.6.24-rc3 with patches in my for-roland branch.
I do see that opensm hangs when I try to kill it, but using 'kill'
forces it to exit.
Sean,
Sorry, but I forgot to add an important detail in the instructions to
reproduce this problem. Your FW has to be QoS-enabled.
Use the latest ConnectX FW release 2_3_000. If you don'r have it, you
can get it from the Mellanox site:
http://www.mellanox.com/support/firmware_download.php
When you burn it, you need to enable the QoS by adding the following
line in the [hca] section of the .ini file:
sx_vlarb_en = true
-- Yevgeny
- Sean
_______________________________________________
general mailing list
[email protected]
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
To unsubscribe, please visit
http://openib.org/mailman/listinfo/openib-general
_______________________________________________
general mailing list
[email protected]
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
