Hi Sasha.
Cosmetics - removing trailing blanks.
Signed-off-by: Yevgeny Kliteynik <[EMAIL PROTECTED]>
---
opensm/scripts/opensm.conf | 6 ++--
opensm/scripts/opensmd | 54 ++++++++++++++++++------------------
opensm/scripts/redhat-opensm.init | 54 ++++++++++++++++++------------------
opensm/scripts/sldd.sh | 30 ++++++++++----------
4 files changed, 72 insertions(+), 72 deletions(-)
diff --git a/opensm/scripts/opensm.conf b/opensm/scripts/opensm.conf
index 3c5dcdf..2ec63d4 100644
--- a/opensm/scripts/opensm.conf
+++ b/opensm/scripts/opensm.conf
@@ -14,7 +14,7 @@
# none, no debug options are enabled.
DEBUG=none
-# LMC
+# LMC
# This option specifies the subnet's LMC value.
# The number of LIDs assigned to each port is 2^LMC.
# The LMC value must be in the range 0-7.
@@ -60,7 +60,7 @@ TIMEOUT=200
# This option defines the log to be the given file.
# By default the log goes to /var/log/opensm.log
# For the log to go to standard output use OSM_LOG=stdout.
-OSM_LOG=/var/log/opensm.log
+OSM_LOG=/var/log/opensm.log
# VERBOSE
# This option increases the log verbosity level.
# The "-v" option may be specified multiple times
@@ -103,7 +103,7 @@ OSM_CACHE_DIR=/var/cache/opensm
# Set to '--cache-options' or '-c' in order to enable
CACHE_OPTIONS="none"
-# HONORE_GUID2LID
+# HONORE_GUID2LID
# This option forces OpenSM to honor the guid2lid file,
# when it comes out of Standby state, if such file exists
# under OSM_CACHE_DIR, and is valid.
diff --git a/opensm/scripts/opensmd b/opensm/scripts/opensmd
index 0a5fe9b..276a76f 100755
--- a/opensm/scripts/opensmd
+++ b/opensm/scripts/opensmd
@@ -62,7 +62,7 @@ shift
if [ ! -x $prog ]; then
echo "OpenSM not installed"
exit 1
-fi
+fi
# Check if OpenSM configured to start automatically
if [[ -z $ONBOOT || "$ONBOOT" != "yes" ]]; then
@@ -248,7 +248,7 @@ echo_failure() {
[ "$BOOTUP" = "color" ] && $MOVE_TO_COL
echo -n "["
[ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
- echo -n $"FAILED"
+ echo -n $"FAILED"
[ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
echo -n "]"
echo -e "\r"
@@ -257,7 +257,7 @@ echo_failure() {
#########################################################################
-
+
# Check if $pid (could be plural) are running
checkpid() {
local i
@@ -321,10 +321,10 @@ start()
echo "Please load Infiniband driver first"
echo
return 2
- fi
-
+ fi
+
local OSM_PID=
-
+
if [ -f $PID_FILE ]; then
local line p
read line < $PID_FILE
@@ -332,14 +332,14 @@ start()
[ -z "${p//[0-9]/}" -a -d "/proc/$p" ] && pid="$pid $p"
done
fi
-
+
if [ -z "$pid" ]; then
pid=`pidof -o $$ -o $PPID -o %PPID -x $bin`
fi
-
+
if [ -n "${pid:-}" ] ; then
echo $"${bin} (pid $pid) is already running..."
- else
+ else
if [ -n "${HONORE_GUID2LID_FLAG}" ]; then
# Run sldd daemod
@@ -352,17 +352,17 @@ start()
do
[ ! -z "$flag" ] && START_FLAGS="$START_FLAGS $flag"
done
-
+
echo $PORT_FLAG | $prog $START_FLAGS > /dev/null 2>&1 &
OSM_PID=$!
echo $OSM_PID > $PID_FILE
- sleep 1
+ sleep 1
checkpid $OSM_PID
RC=$?
[ $RC -eq 0 ] && echo_success "$bin start" || echo_failure "$bin start"
-
+
fi
-return $RC
+return $RC
}
stop()
@@ -381,11 +381,11 @@ stop()
[ -z "${p//[0-9]/}" -a -d "/proc/$p" ] && pid1="$pid1 $p"
done
fi
-
+
pid2=`pidof -o $$ -o $PPID -o %PPID -x $bin`
-
- pid=`echo "$pid1 $pid2" | sed -e 's/\ /\n/g' | sort -n | uniq | sed -e
's/\n/\ /g'`
-
+
+ pid=`echo "$pid1 $pid2" | sed -e 's/\ /\n/g' | sort -n | uniq | sed -e
's/\n/\ /g'`
+
if [ -n "${pid:-}" ] ; then
# Kill opensm
kill -15 $pid > /dev/null 2>&1
@@ -398,7 +398,7 @@ stop()
kill -KILL $p > /dev/null 2>&1
echo -n "."
sleep 1
- done
+ done
done
echo
checkpid $pid
@@ -408,24 +408,24 @@ stop()
else
echo_failure "$bin shutdown"
RC=1
- fi
-
+ fi
+
# Remove pid file if any.
rm -f $PID_FILE
-return $RC
+return $RC
}
status()
{
local pid
-
+
# First try "pidof"
pid=`pidof -o $$ -o $PPID -o %PPID -x ${bin}`
if [ -n "$pid" ]; then
echo $"${bin} (pid $pid) is running..."
- return 0
+ return 0
fi
-
+
# Next try "/var/run/opensm.pid" files
if [ -f $PID_FILE ] ; then
read pid < $PID_FILE
@@ -435,7 +435,7 @@ status()
fi
fi
echo $"${bin} is stopped"
- return 3
+ return 3
}
@@ -445,7 +445,7 @@ case $ACTION in
start
;;
stop)
- stop
+ stop
;;
restart)
stop
@@ -455,7 +455,7 @@ case $ACTION in
status
;;
*)
- echo
+ echo
echo "Usage: `basename $0` {start|stop|restart|status}"
echo
exit 1
diff --git a/opensm/scripts/redhat-opensm.init
b/opensm/scripts/redhat-opensm.init
index 34739f3..9780f4f 100755
--- a/opensm/scripts/redhat-opensm.init
+++ b/opensm/scripts/redhat-opensm.init
@@ -155,7 +155,7 @@ fi
#########################################################################
-
+
start_sldd()
{
if [ -f $sldd_pid_file ]; then
@@ -205,9 +205,9 @@ stop_sldd()
start()
{
local OSM_PID=
-
+
pid=""
-
+
if [ -f $PID_FILE ]; then
local line p
read line < $PID_FILE
@@ -215,14 +215,14 @@ start()
[ -z "${p//[0-9]/}" -a -d "/proc/$p" ] && pid="$pid $p"
done
fi
-
+
if [ -z "$pid" ]; then
pid=`pidof -o $$ -o $PPID -o %PPID -x $bin`
fi
-
+
if [ -n "${pid:-}" ] ; then
echo $"${bin} (pid $pid) is already running..."
- else
+ else
if [ -n "${HONORE_GUID2LID_FLAG}" ]; then
# Run sldd daemod
@@ -235,20 +235,20 @@ start()
do
[ ! -z "$flag" ] && START_FLAGS="$START_FLAGS $flag"
done
-
- echo -n "Starting IB Subnet Manager"
+
+ echo -n "Starting IB Subnet Manager"
echo $PORT_FLAG | $prog $START_FLAGS > /dev/null 2>&1 &
OSM_PID=$!
echo $OSM_PID > $PID_FILE
- sleep 1
+ sleep 1
checkpid $OSM_PID
RC=$?
[ $RC -eq 0 ] && echo_success || echo_failure
[ $RC -eq 0 ] && touch /var/lock/subsys/opensm
echo
-
+
fi
-return $RC
+return $RC
}
stop()
@@ -267,11 +267,11 @@ stop()
[ -z "${p//[0-9]/}" -a -d "/proc/$p" ] && pid1="$pid1 $p"
done
fi
-
+
pid2=`pidof -o $$ -o $PPID -o %PPID -x $bin`
-
- pid=`echo "$pid1 $pid2" | sed -e 's/\ /\n/g' | sort -n | uniq | sed -e
's/\n/\ /g'`
-
+
+ pid=`echo "$pid1 $pid2" | sed -e 's/\ /\n/g' | sort -n | uniq | sed -e
's/\n/\ /g'`
+
if [ -n "${pid:-}" ] ; then
# Kill opensm
echo -n "Stopping IB Subnet Manager."
@@ -280,7 +280,7 @@ stop()
while [ $cnt -lt 6 -a $alive -ne 0 ]; do
echo -n ".";
alive=0
- for p in $pid; do
+ for p in $pid; do
if checkpid $p ; then alive=1; echo -n "-"; fi
done
let cnt++;
@@ -293,11 +293,11 @@ stop()
kill -KILL $p > /dev/null 2>&1
echo -n "+"
sleep 1
- done
+ done
done
checkpid $pid
RC=$?
- [ $RC -eq 0 ] && echo_failure || echo_success
+ [ $RC -eq 0 ] && echo_failure || echo_success
echo
RC=$((! $RC))
else
@@ -305,25 +305,25 @@ stop()
echo_failure
echo
RC=1
- fi
-
+ fi
+
# Remove pid file if any.
rm -f $PID_FILE
rm -f /var/lock/subsys/opensm
- return $RC
+ return $RC
}
status()
{
local pid
-
+
# First try "pidof"
pid=`pidof -o $$ -o $PPID -o %PPID -x ${bin}`
if [ -n "$pid" ]; then
echo $"${bin} (pid $pid) is running..."
- return 0
+ return 0
fi
-
+
# Next try "/var/run/opensm.pid" files
if [ -f $PID_FILE ] ; then
read pid < $PID_FILE
@@ -333,7 +333,7 @@ status()
fi
fi
echo $"${bin} is stopped"
- return 3
+ return 3
}
@@ -343,7 +343,7 @@ case $ACTION in
start
;;
stop)
- stop
+ stop
;;
restart)
stop
@@ -361,7 +361,7 @@ case $ACTION in
fi
;;
*)
- echo
+ echo
echo "Usage: `basename $0` {start|stop|restart|status}"
echo
exit 1
diff --git a/opensm/scripts/sldd.sh b/opensm/scripts/sldd.sh
index 496e74d..cf844a9 100755
--- a/opensm/scripts/sldd.sh
+++ b/opensm/scripts/sldd.sh
@@ -27,16 +27,16 @@
#
#
-# OpenSM found to have the following problem
-# when handover is performed:
+# OpenSM found to have the following problem
+# when handover is performed:
# If some of the cluster nodes are rebooted during the handover they loose
their LID assignment.
-# The reason for it is that the standby SM does not obey its own Guid to LID
table
-# and simply uses the discovered LIDs. If some nodes are not available for it
+# The reason for it is that the standby SM does not obey its own Guid to LID
table
+# and simply uses the discovered LIDs. If some nodes are not available for it
# their previous LID assignment is lost forever.
# The idea is to use an external daemon that will distribute
# the semi-static LID assignment table from the master SM to all standby SMs.
-# A standby SM, becoming a master . needs to obey the copied semi static LID
assignment table.
+# A standby SM, becoming a master . needs to obey the copied semi static LID
assignment table.
# config: /etc/opensm.conf
@@ -66,7 +66,7 @@ declare -i SLDD_DEBUG
RESCAN_TIME=${RESCAN_TIME:-60}
if [ -z "${OSM_HOSTS}" ]; then
- [ $SLDD_DEBUG -eq 1 ] &&
+ [ $SLDD_DEBUG -eq 1 ] &&
echo "No OpenSM servers (OSM_HOSTS) configured for the IB subnet."
exit 0
fi
@@ -78,7 +78,7 @@ arr_OSM_HOSTS=(${OSM_HOSTS})
[EMAIL PROTECTED]
if [ ${num_of_osm_hosts} -eq 1 ]; then
- [ $SLDD_DEBUG -eq 1 ] &&
+ [ $SLDD_DEBUG -eq 1 ] &&
echo "One OpenSM server configured in the IB subnet." &&
echo "Nothing to be done for SLDD"
@@ -123,19 +123,19 @@ update_remote_cache()
if is_alive $host; then
stat=$($RSH $host "/bin/mkdir -p ${CACHE_DIR} >
/dev/null 2>&1; /bin/rm -f ${CACHE_FILE}.${local_host} > /dev/null 2>&1; echo
\$?" | tr -d '[:space:]')
if [ "X${stat}" == "X0" ]; then
- [ $SLDD_DEBUG -eq 1 ] &&
+ [ $SLDD_DEBUG -eq 1 ] &&
echo "Updating $host"
logger -i "SLDD: updating $host with
${CACHE_FILE}"
$RCP ${CACHE_FILE}.upd
${host}:${CACHE_FILE}.${local_host}
/bin/cp ${CACHE_FILE}.upd ${CACHE_FILE}.${host}
else
- [ $SLDD_DEBUG -eq 1 ] &&
+ [ $SLDD_DEBUG -eq 1 ] &&
echo "$RSH to $host failed."
logger -i "SLDD: Failed to update $host with
${CACHE_FILE}. $RSH without password should be enabled"
exit 5
fi
else
- [ $SLDD_DEBUG -eq 1 ] &&
+ [ $SLDD_DEBUG -eq 1 ] &&
echo "$host is down."
continue
fi
@@ -203,7 +203,7 @@ do
# Check if local cache file larger than remote chache
file
if [ ${new_size} -gt ${largest_remote_cache_size} ];
then
- [ $SLDD_DEBUG -eq 1 ] &&
+ [ $SLDD_DEBUG -eq 1 ] &&
echo "Local cache file larger then remote.
Update remote cache files"
last_size=${new_size}
update_remote_cache
@@ -220,7 +220,7 @@ do
# Update local cache file from remote
if [ ${largest_remote_cache_size} -gt ${new_size} ]; then
- [ $SLDD_DEBUG -eq 1 ] &&
+ [ $SLDD_DEBUG -eq 1 ] &&
echo "Local cache file shorter then remote. Use
${largest_remote_cache}"
logger -i "SLDD: updating local cache file with
${largest_remote_cache}"
swap_cache_files
@@ -228,13 +228,13 @@ do
fi
else # The local cache file is empty
- [ $SLDD_DEBUG -eq 1 ] &&
+ [ $SLDD_DEBUG -eq 1 ] &&
echo "${CACHE_FILE} is empty"
largest_remote_cache=$(get_largest_remote_cache)
if [[ -n "${largest_remote_cache}" && -s
"${largest_remote_cache}" ]]; then
# Copy it to the current cache
- [ $SLDD_DEBUG -eq 1 ] &&
+ [ $SLDD_DEBUG -eq 1 ] &&
echo "Local cache file is empty. Use
${largest_remote_cache}"
logger -i "SLDD: updating local cache file with
${largest_remote_cache}"
swap_cache_files
@@ -242,7 +242,7 @@ do
fi
- [ $SLDD_DEBUG -eq 1 ] &&
+ [ $SLDD_DEBUG -eq 1 ] &&
echo "Sleeping ${RESCAN_TIME} seconds."
sleep ${RESCAN_TIME}
--
1.5.1.4
_______________________________________________
general mailing list
[email protected]
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
