Bart Van Assche wrote:
On Jan 17, 2008 4:38 PM, Dotan Barak <[EMAIL PROTECTED]> wrote:
Bart Van Assche wrote:
Four hosts are connected through an InfiniBand network, two with a
MT25204 HCA and two with a MT25208 HCA. All four hosts communicate
fine via IPoIB, and iperf shows the expected results. Until now I only
succeeded to run ib_rdma_bw between the MT25204 interfaces. When I run
ib_rdma_bw on one of the MT25208 interfaces a strange error message is
printed. Any idea how I can fix this ?
MT25208 to MT25204:
[EMAIL PROTECTED]:~# ib_rdma_bw
6468: | port=18515 | ib_port=1 | size=65536 | tx_depth=100 |
iters=1000 | duplex=0 | cma=0 |
server read: Success
6468:pp_server_exch_dest: 0/45 Couldn't read remote address
[EMAIL PROTECTED]:~# ib_rdma_bw 192.168.102.5
6466: | port=18515 | ib_port=1 | size=65536 | tx_depth=100 |
iters=1000 | duplex=0 | cma=0 |
6466:main: Local lid 0x0 detected. Is an SM running?
What is the output of ibv_devinfo in both of those devices?
(maybe you need to specify the IB port value or the device name?)
Thanks, after specifying -i 2 as an argument to ib_rdma_bw the test
runs fine.
Happy to hear this ...
Would it be possible to let the ib_rdma_bw program
determine this parameter automatically ? In my setup the InfiniBand
cable is connected to the second port of the MT25208 interfaces.
I think that for every IB application/test one should specify the exact
device name + IB port.
(this is what I'm doing in our nightly regression)
I'm not the maintainer of the test, but do you suggest that this
benchmark will work on the first
IB port which is in ACTIVE state?
thanks
Dotan
_______________________________________________
general mailing list
[email protected]
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
