Joe Landman wrote: > > Erez Zilber wrote: > >>> * READ: 920 MB/sec > >>> * WRITE: 850 MB/sec > >> Not getting anything even remotely close to this. Are there more > >> details on configuration somewhere? I followed the web page as > indicated. > >> > > > > Are you running iSCSI over TCP or iSCSI over iSER (over InfiniBand)? Our > > results are with iSER. > > I followed the instructions on the web pages that were pointed to for > iSER. Are there updated pages? >
For the initiator side, you can see the documentation that comes with OFED. For the target side, use the wiki page (updated it only last week): https://wiki.openfabrics.org/tiki-index.php?page=ISER-target I saw that you were asking about a RPM. There are RPMs for SuSE & RedHat on the wiki page. These RPMs will be included in OFED 1.4. Erez > Is there a way to tell whether or not > the RDMA path is being used? > Yes - on the initiator side, do the following: seed1:~ # iscsiadm -m session iser: [1] 192.168.10.63:3260,1 iqn.2001-04.com.noni-seed1 You can see that iSER is used. On the target side, do the following: noni:~ # tgtadm --lld iscsi --op show --mode target Target 1: iqn.2001-04.com.noni-seed1 System information: Driver: iscsi Status: running I_T nexus information: I_T nexus: 1 Initiator: iqn.seed1 Connection: 0 RDMA IP Address: 192.168.10.81 <-- "RDMA IP Address" means that iSER is used LUN information: LUN: 0 Type: controller SCSI ID: deadbeaf1:0 SCSI SN: beaf10 Size: 0 Online: Yes Poweron/Reset: Yes Removable media: No Backing store: No backing store LUN: 1 Type: disk SCSI ID: deadbeaf1:1 SCSI SN: beaf11 Size: 82G Online: Yes Poweron/Reset: No Removable media: No Backing store: /dev/sds Account information: ACL information: ALL Erez _______________________________________________ general mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
