Murray Smigel wrote:
Hi,
I am running debian etch on x86-64 hardware. I am using Mellanox
ConnectX HCAs.
At the moment I just have two machines connected by a cable for testing.
I extracted the sources from the OFED-3.0 release SRPMS and built them.
I took a fresh 2.6.24 linux source tree and built a kernel after
replacing the
drivers/infiniband and include/rdma directories with those from the
ofa_kernel-1.3.
The build and install went smoothly.
After the boot with the new kernel:
nasnu2:/etc/udev/rules.d# dmesg | grep mlx
mlx4_core: Mellanox ConnectX core driver v0.01 (May 1, 2007)
mlx4_core: Initializing 0000:0b:00.0
modprobe ib_uverbs
modprobe ib_umad
modprobe ib_uverbs
modprobe ib_ucm
nasnu2:/usr/local/bin# lsmod | grep mlx
mlx4_core 72608 0
Try:
> modprobe mlx4_ib
Regards,
Vladimir
_______________________________________________
general mailing list
[email protected]
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
