On 19:12 Thu 05 Jun , Ira Weiny wrote: > I noticed over the last couple days that ibnetdiscover would print the > incorrect speed on the port I would run ibnetdiscover from. For example: > > Switch 24 "S-0008f10400411f56" # "SW1 wopr ISR9024D (MLX4 FW)" base > port 0 lid 11 lmc 0 > ... > [13] "H-0002c90200219e64"[1](2c90200219e65) # "wopri" lid 32 4xSDR > > ^^^ > (Note from the switch side of things it thinks the speed is > SDR.) > ... > Ca 2 "H-0002c90200219e64" # "wopri" > [1](2c90200219e65) "S-0008f10400411f56"[13] # lid 32 lmc > 0 "SW1 wopr ISR9024D (MLX4 FW)" lid 11 4xDDR > > > ^^^ > > (but here DDR.) > > It turns out that when you first discover a switch the port object created > gets > the PortInfo of Port "0". > > This patch queries again for the PortInfo of the port we "came in on". > > Ira > > > From 5bc66af276c7baabd4d66be9df0379271cb625b4 Mon Sep 17 00:00:00 2001 > From: Ira K. Weiny <[EMAIL PROTECTED]> > Date: Thu, 5 Jun 2008 19:03:44 -0700 > Subject: [PATCH] infiniband-diags/src/ibnetdiscover.c: Fix the PortInfo data > on the port we discover a switch on. > > Previously the portinfo data for that port object would be the PortInfo of > port "0" of the switch. Specifically this would cause the speed of the > link > to be printed incorrectly. > > Signed-off-by: Ira K. Weiny <[EMAIL PROTECTED]>
Applied. Thanks. Sasha _______________________________________________ general mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
