ipoib: blocking mcast loopback IPoIB packets
This patch makes any mcast packet sent via IPoIB
from any host, to be blocked when looped back
to the same host it was sent from.
The blocking is done by the HCA if possible.
This patch creates an improvement of up to 39% in bandwidth when
seding mcast packets with IPoIB.
There is also an improvment of 12% in cpu usage.
Signed-off-by: Ron Livne <[EMAIL PROTECTED]>
Changes in v2:
IB_QP_BLOCK_LOOPBACK QP creation flag in version 1, is now called
IB_QP_CREATE_MULTICAST_BLOCK_LOOPBACK.
Index: kernels/linux-2.6.26-rc2/drivers/infiniband/ulp/ipoib/ipoib_verbs.c
===================================================================
--- kernels.orig/linux-2.6.26-rc2/drivers/infiniband/ulp/ipoib/ipoib_verbs.c
2008-06-02 16:58:56.000000000 +0300
+++ kernels/linux-2.6.26-rc2/drivers/infiniband/ulp/ipoib/ipoib_verbs.c
2008-06-22 15:42:16.000000000 +0300
@@ -153,7 +153,8 @@ int ipoib_transport_dev_init(struct net_
.max_recv_sge = IPOIB_UD_RX_SG
},
.sq_sig_type = IB_SIGNAL_ALL_WR,
- .qp_type = IB_QPT_UD
+ .qp_type = IB_QPT_UD,
+ .create_flags = 0
};
int ret, size;
@@ -201,7 +202,10 @@ int ipoib_transport_dev_init(struct net_
init_attr.recv_cq = priv->recv_cq;
if (priv->hca_caps & IB_DEVICE_UD_TSO)
- init_attr.create_flags = IB_QP_CREATE_IPOIB_UD_LSO;
+ init_attr.create_flags |= IB_QP_CREATE_IPOIB_UD_LSO;
+
+ if (priv->hca_caps & IB_DEVICE_BLOCK_LOOPBACK)
+ init_attr.create_flags |=
IB_QP_CREATE_MULTICAST_BLOCK_LOOPBACK;
if (dev->features & NETIF_F_SG)
init_attr.cap.max_send_sge = MAX_SKB_FRAGS + 1;
_______________________________________________
general mailing list
[email protected]
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
