On Thu, Jul 10, 2008 at 09:49:54AM -0400, Michael Di Domenico wrote: > > > tests using datagram IPoIB (non-connected mode) > > dmesg from the compute node > > cfd-cnsl-0001:~ # dmesg > > ib0: Send unicast ARP to 0518 > > ib0: Send unicast ARP to 0518 > > ib0: Send unicast ARP to 0518 > > ib0: Send unicast ARP to 0518 > > ib0: Start path record lookup for fe80:0000:0000:0000:00e0:8111:0100:007d > > MTU > 1024 > > ib0: PathRec LID 0x0161 for GID fe80:0000:0000:0000:00e0:8111:0100:007d > > ib0: Created ah ffff81042063dc80 > > ib0: created address handle ffff8102206144c0 for LID 0x0161, SL 0 > > ib0: Send unicast ARP to 0161 > > ib0: Send unicast ARP to 0161 > > ib0: Send unicast ARP to 0161 > > ib0: Send unicast ARP to 0518 > > ib0: Send unicast ARP to 0518 > > ib0: Send unicast ARP to 0518 > > ib0: Send unicast ARP to 0161 > > ib0: neigh_destructor for bonding device: ib0 > > ib0: neigh_cleanup for 000404 fe80:0000:0000:0000:00e0:8111:0100:0091 Here I don't see any problem.
> > > > > > dmesg from the IO node > > > > [EMAIL PROTECTED] ~]# dmesg > > ib0: Send unicast ARP to 0384 > > ib0: Send unicast ARP to 0384 > > ib_mthca 0000:07:00.0: too many gathers > > ib0: post_send failed > > ib_mthca 0000:07:00.0: opcode invalid > > ib0: post_send failed This looks like a problem that needs investigation but this is not ConnectX. Are you sure you are using only ConnectX? _______________________________________________ general mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
