Or Gerlitz wrote: > Pradeep Satyanarayana <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>> wrote: > > I downloaded a recent version of Roland's git tree and tried IPoIB > bonding. Fail over does not seem to be working at all. I have tried > OFED 1.3.2 on a Rhel5 derivative and that (fail over) worked as > expected. > > Is this a known issue? Given that OFED 1.4 will be in sync with main > line kernel, is this an issue to be addressed in OFED 1.4 too? Has > any one else tried this out recently? My impression is that all > bonding patches were already upstream. > > > I just tried ipoib/bonding with mainline kernel 2.6.27 and it works > fine, as expected, see below. Can you repeat the exact sequence and see > if it works for you, or send the settings that break bonding/ipoib on > your system? I didn't use network scripts but this should be the issue > if you use the directives that come with the ib-bonding package.
I just retested and it is indeed working as expected. My earlier conclusions were erroneous. Between my experiments some one must have stepped on the cable and when I checked the cabling in the lab the port was disconnected. No wonder, the fail over did not occur as expected. Sorry about the false report! Pradeep _______________________________________________ general mailing list general@lists.openfabrics.org http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
