Ah.. thanks. (when I installed, I just told it to install all)
[r...@host jenos]# modprobe ib_ipoib
FATAL: Error inserting ib_ipoib
(/lib/modules/2.6.27.5-41.fc9.x86_64/updates/kernel/drivers/infiniband/ulp/ipoib/ib_ipoib.ko):
Unknown symbol in module, or unknown parameter (see dmesg)
Then dmesg shows this line:
ib_ipoib: Unknown symbol icmpv6_send
I have IPv6 disabled on this host for other reasons. Perhaps that's
causing the problem? If so, is there a way to build w/o IPv6 requirements?
thx-
Jeremy
Nicolas Morey Chaisemartin wrote:
Jeremy Enos wrote:
[r...@host OFED-1.4-20081209-0926]# service openibd status
HCA driver loaded
The following OFED modules are loaded:
ib_ipath
mlx4_core
mlx4_ib
ib_mthca
ib_uverbs
ib_umad
ib_sa
ib_cm
ib_mad
ib_core
iw_cxgb3
[r...@host OFED-1.4-20081209-0926]# ifup ib0
ib_ipoib device ib0 does not seem to be present, delaying
initialization.
You need the ib_ipoib module to be able to use ipoib.
Did you put the right option (--with_ipoib_mod or something like this)
when running ./configure for ofa_kernel?
Try to run modprobe ib_ipoib.
If it works then, add ipoib to your /etc/infiniband/openib.conf so
it'll be loaded by openibd.
If it doesn't, so check syslog, dmesg and other logs to see it it was
an error or simply the file is missing
If it's missing, recompile your ofa_kernel with the ipoib module.
Nicolas
_______________________________________________
general mailing list
[email protected]
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
