Hi Radhika,

Good to know build is successful!

*So is this the final output of the telephony module?*
YES, successful build would result in 3-4 RPMs as mentioned by you. Every
folder/Plug-in would generate it's own RPM.
In most of the cases it is just 3 RPMs -
*libslp-tapi-0.6.14-1.armv7l.**rpm                      - A*ctual RPM that
needs to be installed
*libslp-tapi-debuginfo-0.6.14-**1.armv7l.rpm     - *RPM that contains
information for debugging
*libslp-tapi-debugsource-0.6.**14-1.armv7l.rpm - *RPM that contains
references to Source files useful while debugging

*libslp-tapi-devel-0.6.14-1.armv7l.rpm*
The other RPM generated depends on whether there is different branch
present (development) and is included in mainstream build.

Installation of *libslp-tapi-0.6.14-1.armv7l.**rpm *is sufficient to get *
libslp-tapi* functionality.

*If so every folder/plugin is considered as separate library?
*Not necessarily as a library, but each folder/Plug-in would generate it's
corresponding RPM (shared object).

*Is the plugins loaded dynamically or all the plugins are loaded when the
telephony service is started?*
All these RPMs ( each Plug-in's) when installed, installs it's
corresponding '*.so*' in "*/usr/lib/telephony/plugins/*" folder.
These .so's are loaded by Telephony Server during it's initialization.

*My confusion is whether all these rpm files belonging to the telephony
folder constitute the telephony service or a separate single .so or .dll is
created for telephony service?*
NO, there is NO separate .so OR .dll created for Telephony Service apart
from these RPMs. As mentioned earlier, we need to install these RPMs
individually.
There is a possibility of these RPMs getting clubbed with the mainstream
Tizen Platform binary such that these RPMs would become part of Platform
binary and installation of Platform would in turn install these RPMs
(manual installation is not needed).

Warm Regards,
Suresh

On Fri, Dec 28, 2012 at 12:22 PM, Radhika Praveen <[email protected]>wrote:

> Hi All,
>
> I built the telephony module alone.
> It built successfully.
> I was checking the output.
> It is available in the form of rpm files.
> For every folder in the telephony module 3 or 4 rpm files have been built.
> Below is one example:
>
> Inside folder GBS-ROOT\local\repos\tizen\armv7l\RPMS
> libslp-tapi-0.6.14-1.armv7l.rpm
> libslp-tapi-debuginfo-0.6.14-1.armv7l.rpm
> libslp-tapi-debugsource-0.6.14-1.armv7l.rpm
> libslp-tapi-devel-0.6.14-1.armv7l.rpm
>
> So is this the final output of the telephony module?
> If so every folder/plugin is considered as separate library?
> Is the plugins loaded dynamically or all the plugins are loaded when the
> telephony service is started?
>
> My confusion is whether all these rpm files belonging to the telephony
> folder constitute the telephony service or a separate single .so or .dll is
> created for telephony service?
>
> Regards
> Radhika
>
> _______________________________________________
> General mailing list
> [email protected]
> https://lists.tizen.org/listinfo/general
>
>
_______________________________________________
General mailing list
[email protected]
https://lists.tizen.org/listinfo/general

Reply via email to