Hello Venkat, We are struggling for building Tizen for ARM. You are already able to do that.
We request you to share the steps if its not confidential. regards Arif On Tue, Mar 12, 2013 at 9:47 PM, Jan-Simon Möller <[email protected]> wrote: > Venkat, > > can you send your steps ? I can add corrections to fix the issues below. > I'm also writing a howto, but it is not yet finished. > > Best, > JS > > Am Dienstag, 12. März 2013, 18:35:56 schrieb Arif Khan: > > Hi Jan-Simon/Venkat, > > > > I am also trying to build Tizen for Panda board. I am also facing the > > same build issue for ARM. > > Where can i get the steps to build Tizen for Panda board. > > > > Venkat as you are able to up the Tizen on Panda board, can you provide > the > > steps for building the image, uboot etc for Panda board. > > > > thanks > > Arif > > > > On Fri, Mar 8, 2013 at 3:04 PM, Jan-Simon Möller <[email protected]> wrote: > > > Hi ! > > > > > > From a first glance, the *MACRO-* looks wrong. In general all *-x86-* > > > packages > > > are not needed for native arm. They're just part of the build > > > infrastructure / > > > obs. > > > I need to investigate more on Monday/Tuesday when I'm back home. > > > > > > Best, > > > Jan-Simon > > > > > > Am Mittwoch, 6. März 2013, 17:31:00 schrieb Vikash Kumar: > > > > Hello JS, > > > > > > > > Thanks for your reply. > > > > > > > > I have attached a file containing the last messages that I got before > > > > the > > > > build stops. It contains the name of all packages that failed to > build, > > > > mainly because of dependencies. > > > > > > > > Do provide your input on this. > > > > > > > > Thanks, > > > > > > > > Vikash. > > > > > > > > On Wed, Mar 6, 2013 at 3:37 PM, Jan-Simon Möller <[email protected]> > wrote: > > > > > Can you provide a list of packages missing/unresolved for ARM ? > > > > > > > > > > I'm currently travelling and can check when I'm home next week. > > > > > > > > > > Best, > > > > > JS > > > > > > > > > > Am Mittwoch, 6. März 2013, 14:10:44 schrieb Vikash Kumar: > > > > > > Hello Venkat, > > > > > > > > > > > > Actually I said that I did not find other packages like > > > > > > xf86video-omap , > > > > > > > > > libdrm_omap, and I found libpthread-stubs at location > > > > > > > > > > > > framework/uifw/xorg/xcb/libpthread-stubs > > > > > > > > > > > > There is nothing like adaptation/xcb/ in the source code that I > > > > > > have. > > > > > > > > > > > > Can you explain the whole procedure, like from where I will get > > > > > > those > > > > > > packages and the steps after the build process.?? > > > > > > > > > > > > Thanks, > > > > > > > > > > > > Vikash > > > > > > > > > > > > On Wed, Mar 6, 2013 at 1:32 PM, <[email protected]> > wrote: > > > > > > > Hi , > > > > > > > > > > > > > > > > > > > > > > > > > > > > Are you able to build the other packages? libpthred can be > found > > > > > > at > > > > > > > > > > "adaptation/xcb/libpthread-stubs" form the tizen build. > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks, > > > > > > > > > > > > > > Venkat Raju. > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > From: "Vikash Kumar" <[email protected]> > > > > > > > Sent: Wednesday, March 6, 2013 11:06am > > > > > > > To: [email protected] > > > > > > > Subject: Re: [Tizen General] Tizen build for OMAP (Panda Board) > > > > > > > > > > > > > > Hello everyone, > > > > > > > > > > > > > > Can anyone provide some pointers on this issue. I am trying to > > > > > > > port > > > > > > > > > > Tizen > > > > > > > > > > > > on Omap (panda board), but not getting any success till now. > > > > > > > > > > > > > > Thanks, > > > > > > > > > > > > > > Vikash. > > > > > > > > > > > > > > On Fri, Mar 1, 2013 at 11:20 AM, Vikash Kumar > > > > > > > > > > <[email protected]>wrote: > > > > > > >> Hello Venkat, > > > > > > >> > > > > > > >> Thanks for your reply. > > > > > > >> > > > > > > >> I searched the source code but didnt find the packages that > you > > > > > > >> listed > > > > > > >> except for libpthread-stubs. > > > > > > >> > > > > > > >> Am I missing something or do I have to get those packages from > > > > > > > > > > somewhere > > > > > > > > > > > >> else? > > > > > > >> > > > > > > >> Also I have seen in some other thread that u build "pvr-omap4" > > > > > > >> folder. > > > > > > >> Does that folder contain the same packages?? > > > > > > >> > > > > > > >> Thanks, > > > > > > >> > > > > > > >> Vikash. > > > > > > >> > > > > > > >> On Thu, Feb 28, 2013 at 5:05 PM, <[email protected] > > > > > > > > wrote: > > > > > > >>> Hi, > > > > > > >>> > > > > > > >>> > > > > > > >>> > > > > > > >>> To bring up the UI on Panda , I've built the xf86video-omap > , > > > > > > >>> libdrm_omap and libpthredstubs packages. > > > > > > >>> > > > > > > >>> > > > > > > >>> > > > > > > >>> With this you are have enough packages to bring up the UI > tizen. > > > > > > >>> > > > > > > >>> > > > > > > >>> > > > > > > >>> Thanks, > > > > > > >>> > > > > > > >>> Venkat Raju. > > > > > > >>> > > > > > > >>> > > > > > > >>> > > > > > > >>> -----Original Message----- > > > > > > >>> From: "Vikash Kumar" <[email protected]> > > > > > > >>> Sent: Thursday, February 28, 2013 5:00pm > > > > > > >>> To: [email protected] > > > > > > >>> Subject: [Tizen General] Tizen build for OMAP (Panda Board) > > > > > > >>> > > > > > > >>> Hello all, > > > > > > >>> > > > > > > >>> I wanted to build Tizen source code and port this on Omap > (panda > > > > > > > > > > board). > > > > > > > > > > > >>> So far I am able to build some of the packages, but not the > > > > > > >>> whole > > > > > > > > > > source > > > > > > > > > > > >>> code. It gave errors regarding the dependencies like this, > > > > > > >>> > > > > > > >>> === the following packages failed to build due to missing > build > > > > > > >>> dependencies === > > > > > > >>> ...... > > > > > > >>> === the following packages failed to build due to rpmbuild > issue > > > > > > === > > > > > > > > > >>> ...... > > > > > > >>> > > > > > > >>> So, I wanted to know whether I need to build whole source > code > > > > > > >>> of > > > > > > > > > > Tizen > > > > > > > > > > > >>> to be able to port in on Omap? > > > > > > >>> Or some particular packages will do the work? > > > > > > >>> > > > > > > >>> Please suggest me the solution. > > > > > > >>> > > > > > > >>> Thanks in advance, > > > > > > >>> > > > > > > >>> Vikash. > > > > > > > > > > -- > > > > > > > > > > Dipl.-Ing. > > > > > Jan-Simon Möller > > > > > > > > > > [email protected] > > > > > > -- > > > > > > Dipl.-Ing. > > > Jan-Simon Möller > > > > > > [email protected] > > > _______________________________________________ > > > General mailing list > > > [email protected] > > > https://lists.tizen.org/listinfo/general > -- > > Dipl.-Ing. > Jan-Simon Möller > > [email protected] > -- Regards Arif
_______________________________________________ General mailing list [email protected] https://lists.tizen.org/listinfo/general
