Hi all,
I am trying to enable Bluetooth on Tizen 2.0.
Can anyone please brief me about how framework is hooked with kernel and the
configurations required to be set.
Enabled Bluetooth support (i.e) l2cap,rfcomm,bnep,hidp,hci in kernel config,
there is a wait_for_completion_timeout in st_kim_start() which will be released
by st_tty_open
via. application, which i suspect is not opend by application. Please help me
on the same.
-sh-4.1# sh bt-stack-up.sh
Check for Bluetooth device status
hci0: Type: BR/EDR Bus: UART
Bluetooth device is UP
[ 122.029235] (stk) :ldisc installation timeout
[ 123.029327] (stk) : timed out waiting for ldisc to be un-installed
[ 124.138641] (stk) :ldisc installation timeout
[ 125.138549] (stk) : timed out waiting for ldisc to be un-installed
[ 126.248077] (stk) :ldisc installation timeout
[ 127.247985] (stk) : timed out waiting for ldisc to be un-installed
[ 128.380767] (stk) :ldisc installation timeout
[ 129.380767] (stk) : timed out waiting for ldisc to be un-installed
[ 130.490112] (stk) :ldisc installation timeout
[ 131.490112] (stk) : timed out waiting for ldisc to be un-installed
[ 132.607391] (stk) :ldisc installation timeout
[ 133.607360] (stk) : timed out waiting for ldisc to be un-installed
[ 133.613861] Bluetooth: st_register failed -22
Can't init device hci0: Input/output error (5)
$ hciconfig -a
hci0: Type: BR/EDR Bus: UART
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
DOWN RUNNING
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:0 acl:0 sco:0 commands:0 errors:0
Thanks,
Dhruv Chawda
_______________________________________________
General mailing list
[email protected]
https://lists.tizen.org/listinfo/general
