You're welcome for whatever help I may have provided! We've been working to get a successful build of Tizen 3.0, and it's been quite a challenge! We feel like we're slowly getting it figured out but until we actually succeed it's hard to say if we are actually making progress. You know how it goes! :-(
I'm puzzled by the path you highlighted, too. What does your gbs command line look like? Did you use repo to get the project repository set? (We *think*) We've had synchronization problems between the manifest and the actual repositories needed by the project (not sure how to say that better...). It's led to naming mismatches in the libraries. But I wouldn't expect to see that sort of issue on the 12.2 release. Are you trying to do this on the released version of 2.2 or one of the snapshots? Paul Paul Hanchett ------------------- Infotainment Engineer MSX on behalf of Jaguar Land Rover One World Trade Center, 121 Southwest Salmon Street, 11th Floor, Portland, Oregon, 97204 Email: [email protected] ------------------- Business Details: Jaguar Land Rover Limited Registered Office: Abbey Road, Whitley, Coventry CV3 4LF Registered in England No: 1672070 On Mon, Sep 2, 2013 at 7:50 AM, Martin Hennelly < [email protected]> wrote: > Thanks for Paul for your advice. I was now able to make a build of an > individual module following the info in the link you sent – basically my > .gbs.conf was not set to use the pre-built tools. I adjusted my top-level > and local .gbs.conf as shown below and I could build an individual module > > > > I am using gbs version 18. I was always able to build individual modules > of the previous Tizen releases. However a system build was not possible > due to cyclic dependencies. > > > > I am still not able to perform a system level build even following the > info in the link you sent > > > The system level build still fails due to the incorrect path being passed > to depanneur. > > So when I try and build at the system level in the folder > /home/nec/Tizen/Tizen2_2 I get the incorrect path passed to depanneur and > not surprisingly no code can be found.: > > depanneur --arch=armv7l > --repository=/home/nec/Tizen/Tizen2_2/pre-built/toolchain-arm/ > --repository=/home/nec/Tizen/Tizen2_2/pre-built/toolchain-x86/ --repository= > http://download.tizen.org/releases/2.2/tizen-2.2/repos/tizen-base/armv7l/packages--repository= > http://download.tizen.org/releases/2.2/tizen-2.2/repos/tizen-main/armv7l/packages--dist=tizen2.2 > --configdir=/var/tmp/nec-gbs > *--path=/home/nec *--exclude=bash --exclude=bzip2-libs --exclude=c-ares > --exclude=cmake --exclude=coreutils --exclude=diffutils --exclude=eglibc > --exclude=elfutils-libelf --exclude=elfutils-libs --exclude=elfutils > --exclude=fdupes --exclude=file --exclude=findutils --exclude=gawk > --exclude=gmp --exclude=gzip --exclude=libacl --exclude=libattr > --exclude=libcap --exclude=libcurl --exclude=libfile --exclude=libgcc > --exclude=liblua --exclude=libstdc++ --exclude=make --exclude=mpc > --exclude=mpfr --exclude=ncurses-libs --exclude=nodejs --exclude=nspr > --exclude=nss-softokn-freebl --exclude=nss --exclude=openssl > --exclude=patch --exclude=popt --exclude=rpm-build --exclude=rpm-libs > --exclude=rpm --exclude=sed --exclude=sqlite --exclude=tar > --exclude=xz-libs --exclude=zlib --exclude=binutils --exclude=gcc > --exclude=filesystem --exclude=aul --exclude=libmm-sound --exclude=libtool > --clean-once --debug --threads=2 --packaging-dir=packaging > --upstream-branch=upstream > > Result in error: > error: No source package found at /home/nec > > > and when I build at the individual module level, the right path is > selected from the directory in which I run the gbs command: > > depanneur --arch=armv7l > --repository=/home/nec/Tizen/Tizen2_2/pre-built/toolchain-arm/ > --repository=/home/nec/Tizen/Tizen2_2/pre-built/toolchain-x86/ --repository= > http://download.tizen.org/releases/2.2/tizen-2.2/repos/tizen-base/armv7l/packages--repository= > http://download.tizen.org/releases/2.2/tizen-2.2/repos/tizen-main/armv7l/packages--dist=tizen2.2 > --configdir=/var/tmp/nec-gbs > * > --path=/home/nec/Tizen/Tizen2_2/framework/messaging/msg-service*--exclude=bash > --exclude=bzip2-libs --exclude=c-ares --exclude=cmake > --exclude=coreutils --exclude=diffutils --exclude=eglibc > --exclude=elfutils-libelf --exclude=elfutils-libs --exclude=elfutils > --exclude=fdupes --exclude=file --exclude=findutils --exclude=gawk > --exclude=gmp --exclude=gzip --exclude=libacl --exclude=libattr > --exclude=libcap --exclude=libcurl --exclude=libfile --exclude=libgcc > --exclude=liblua --exclude=libstdc++ --exclude=make --exclude=mpc > --exclude=mpfr --exclude=ncurses-libs --exclude=nodejs --exclude=nspr > --exclude=nss-softokn-freebl --exclude=nss --exclude=openssl > --exclude=patch --exclude=popt --exclude=rpm-build --exclude=rpm-libs > --exclude=rpm --exclude=sed --exclude=sqlite --exclude=tar > --exclude=xz-libs --exclude=zlib --exclude=binutils --exclude=gcc > --exclude=filesystem --exclude=aul --exclude=libmm-sound --exclude=libtool > --clean-once --debug --threads=2 --packaging-dir=packaging > --upstream-branch=upstream > > results in build success. > > > > Many thanks again Paul for your advice – I’ll press on and have another > look at the system level build > > > > Regards - Martin > > > > ~/.gbs.conf > > [general] > > tmpdir = /var/tmp > editor = > packaging_branch = master > upstream_branch = upstream > upstream_tag = upstream/${upstreamversion} > packaging_dir = packaging > profile = profile.tizen2.2 > buildroot = ~/GBS-ROOT/ > user = [uname] > passwdx = [pword_hash] > > ~/Tizen/Tizen2_2/.gbs.conf > > [general] > tmpdir=/var/tmp/ > profile = profile.tizen2.2 > work_dir=. > > [repo.tizen2.2_arm] > url=${work_dir}/pre-built/toolchain-arm/ > > [repo.tizen2.2_x86] > url=${work_dir}/pre-built/toolchain-x86/ > > [repo.tizen2.2] > url = http://download.tizen.org/releases/2.2/tizen-2.2/ > > [profile.tizen2.2] > repos=repo.tizen2.2_arm, repo.tizen2.2_x86, repo.tizen2.2 > buildconf=${work_dir}/scm/meta/build-config/build.conf > > > > > > > > *From:* Hanchett, Paul [mailto:[email protected]] > *Sent:* 30 August 2013 17:27 > *To:* Martin Hennelly > *Cc:* [email protected]; [email protected] > *Subject:* Re: [Tizen General] Missing Dependencies in the Local Package > Build of Tizen 2.2 > > > > Hey Martin-- > > > > In the spirit of one blind man helping another, have you followed the > recent conversations about doing local tizen builds from scratch? In > particular look at the manifest switch (-m) in the example > here<https://www.google.com/url?q=https%3A%2F%2Fsource.tizen.org%2Fdocumentation%2Fdeveloper-guide%2Fcreating-tizen-platform-image-scratch-through-local-build&sa=D&sntz=1&usg=AFrqEzczKXPylm0MqcYt3_h-tQpYkKr-Bw> > . > > > > As I look at the docs though, it doesn't look like they've used -m in the > 2.2 repo example... And I've no idea of how to handle it if you already > have your repository tree in place, sorry. > > > > Did it build at some previous time? :-) > > > > Paul > > > > > > Paul Hanchett > ------------------- > Infotainment Engineer > MSX on behalf of Jaguar Land Rover > One World Trade Center, 121 Southwest Salmon Street, 11th Floor, Portland, > Oregon, 97204 > > Email: [email protected] > ------------------- > > Business Details: > Jaguar Land Rover Limited > Registered Office: Abbey Road, Whitley, Coventry CV3 4LF > > Registered in England No: 1672070 > > > > On Fri, Aug 30, 2013 at 6:51 AM, Martin Hennelly < > [email protected]> wrote: > > HI All, > > I am getting an error trying to build a local build of a single module of > Tizen 2.2 on Ubuntu12.04 LTS. This could be happening because Ubuntu 12.04 > used up-versioned and renamed packages. The build error I get is basically > for missing dependencies. I can’t really work around this error as I do > not control the manifest file and so cannot patch it. Could Samsung please > provide a workaround in the manifest? > > > > The build error basically results in missing dependencies: > > debug: expansion error > > debug: nothing provides libxml2-x86-arm needed by cmake-x86-arm > > debug: nothing provides libcurl-x86-arm needed by cmake-x86-arm > > debug: nothing provides expat-x86-arm needed by cmake-x86-arm > > debug: nothing provides c-ares-x86-arm needed by cmake-x86-arm > > The full debug listing and .gbs.conf may be seen below. > > My Linux Configuration is this: > > $ cat /etc/*-release > > DISTRIB_ID=Ubuntu > > DISTRIB_RELEASE=12.04 > > DISTRIB_CODENAME=precise > > DISTRIB_DESCRIPTION="Ubuntu 12.04.2 LTS" > > NAME="Ubuntu" > > VERSION="12.04.2 LTS, Precise Pangolin" > > ID=ubuntu > > ID_LIKE=debian > > PRETTY_NAME="Ubuntu precise (12.04.2 LTS)" > > VERSION_ID="12.04" > > > > $ uname -a > > Linux DTizen 3.5.0-24-generic #37~precise1-Ubuntu SMP Thu Feb 7 22:09:59 > UTC 2013 x86_64 x86_64 x86_64 GNU/Linux > > > > > > Regards - Martin > > (there is nothing special about the module I try to build - the same > behaviour happens with all. Likewise I have added various build extensions > like –clean and –include-all and the result is the same) > > [mymachine]:~/Tizen/Tizen2_2/framework/system/libslp-sensor$ gbs build -A > armv7l --debug > gbp:debug: git rev-parse --is-bare-repository > gbp:debug: git rev-parse --git-dir > gbp:debug: git rev-parse --show-toplevel > gbs:info: generate repositories ... > gbs:debug: fetching > http://download.tizen.org/releases/2.2/latest/repos/tizen-main/armv7l/packages/repodata/repomd.xml=> > /var/tmp/nec-gbs/gbscacheO9a9DQ/repomd.xml > gbs:debug: fetching > http://download.tizen.org/releases/2.2/latest/repos/tizen-main/armv7l/packages/repodata/repomd.xml=> > /var/tmp/nec-gbs/gbscacheO9a9DQ/repomd.xml > gbs:debug: fetching > http://download.tizen.org/releases/2.2/latest/builddata/build.xml => > /var/tmp/nec-gbs/gbscacheO9a9DQ/build.xml > gbs:debug: fetching > http://download.tizen.org/releases/2.2/latest/builddata/0fa267f9b5c2439349e22f9049e3f5b421e7d97bcc36f0a8254963f0fb5660f0-build.conf=> > /var/tmp/nec-gbs/gbscacheO9a9DQ/0fa267f9b5c2439349e22f9049e3f5b421e7d97bcc36f0a8254963f0fb5660f0-build.conf > gbs:debug: fetching > http://download.tizen.org/releases/2.2/latest/repos/tizen-base/armv7l/packages/repodata/repomd.xml=> > /var/tmp/nec-gbs/gbscacheO9a9DQ/repomd.xml > gbs:debug: fetching > http://download.tizen.org/releases/2.2/latest/repos/tizen-base/armv7l/packages/repodata/repomd.xml=> > /var/tmp/nec-gbs/gbscacheO9a9DQ/repomd.xml > gbs:debug: fetching > http://download.tizen.org/releases/2.2/latest/repos/tizen-base/source/repodata/repomd.xml=> > /var/tmp/nec-gbs/gbscacheO9a9DQ/repomd.xml > gbs:debug: fetching > http://download.tizen.org/releases/2.2/latest/repos/tizen-base/source/repodata/repomd.xml=> > /var/tmp/nec-gbs/gbscacheO9a9DQ/repomd.xml > gbs:debug: running command: depanneur --arch=armv7l --repository=http:// > [uname]:[pword]@ > download.tizen.org/releases/2.2/latest/repos/tizen-main/armv7l/packages/--repository= > http://martinh:[email protected]/releases/2.2/latest/repos/tizen-base/armv7l/packages/--repository=http:// > [uname]:[pword]@ > download.tizen.org/releases/2.2/latest/repos/tizen-base/source/--dist=tizen > --configdir=/var/tmp/nec-gbs > --path=/home/nec/Tizen/Tizen2_2/framework/system/libslp-sensor --debug > --threads=1 --packaging-dir=packaging --upstream-branch=upstream > info: start building packages from: > /home/nec/Tizen/Tizen2_2/framework/system/libslp-sensor (git) > debug: working on /home/nec/Tizen/Tizen2_2/framework/system/libslp-sensor > debug: my_system: cd > /home/nec/Tizen/Tizen2_2/framework/system/libslp-sensor; git show > HEAD:packaging >/tmp/WMgynSu0wV 2>/dev/null > info: prepare sources... > debug: my_system: cd > /home/nec/Tizen/Tizen2_2/framework/system/libslp-sensor; git show > HEAD:packaging/sensor.spec >/tmp/PMKy3imFrR/sensor.spec 2>/dev/null > info: retrieving repo metadata... > debug: my_system: > > /home/nec/GBS-ROOT-profile.tizen/local/order/.repo.cache.local > debug: my_system: /usr/lib/build/createrpmdeps > /home/nec/GBS-ROOT-profile.tizen/local/repos/tizen/armv7l/RPMS >> > /home/nec/GBS-ROOT-profile.tizen/local/order/.repo.cache.local > debug: my_system: echo D: >> > /home/nec/GBS-ROOT-profile.tizen/local/order/.repo.cache.local > debug: my_system: > > /home/nec/GBS-ROOT-profile.tizen/local/order/.repo.cache.remote > debug: /usr/lib/build/createrepomddeps > --cachedir=/home/nec/GBS-ROOT-profile.tizen/local/cache > http://download.tizen.org/releases/2.2/latest/repos/tizen-main/armv7l/packages/>> > /home/nec/GBS-ROOT-profile.tizen/local/order/.repo.cache.remote > debug: my_system: /usr/lib/build/createrepomddeps > --cachedir=/home/nec/GBS-ROOT-profile.tizen/local/cache > http://download.tizen.org/releases/2.2/latest/repos/tizen-main/armv7l/packages/>> > /home/nec/GBS-ROOT-profile.tizen/local/order/.repo.cache.remote > debug: my_system: echo D: >> > /home/nec/GBS-ROOT-profile.tizen/local/order/.repo.cache.remote > debug: /usr/lib/build/createrepomddeps > --cachedir=/home/nec/GBS-ROOT-profile.tizen/local/cache > http://download.tizen.org/releases/2.2/latest/repos/tizen-base/armv7l/packages/>> > /home/nec/GBS-ROOT-profile.tizen/local/order/.repo.cache.remote > debug: my_system: /usr/lib/build/createrepomddeps > --cachedir=/home/nec/GBS-ROOT-profile.tizen/local/cache > http://download.tizen.org/releases/2.2/latest/repos/tizen-base/armv7l/packages/>> > /home/nec/GBS-ROOT-profile.tizen/local/order/.repo.cache.remote > debug: my_system: echo D: >> > /home/nec/GBS-ROOT-profile.tizen/local/order/.repo.cache.remote > debug: /usr/lib/build/createrepomddeps > --cachedir=/home/nec/GBS-ROOT-profile.tizen/local/cache > http://download.tizen.org/releases/2.2/latest/repos/tizen-base/source/ >> > /home/nec/GBS-ROOT-profile.tizen/local/order/.repo.cache.remote > debug: my_system: /usr/lib/build/createrepomddeps > --cachedir=/home/nec/GBS-ROOT-profile.tizen/local/cache > http://download.tizen.org/releases/2.2/latest/repos/tizen-base/source/ >> > /home/nec/GBS-ROOT-profile.tizen/local/order/.repo.cache.remote > debug: my_system: echo D: >> > /home/nec/GBS-ROOT-profile.tizen/local/order/.repo.cache.remote > debug: my_system: cat > /home/nec/GBS-ROOT-profile.tizen/local/order/.repo.cache.local > /home/nec/GBS-ROOT-profile.tizen/local/order/.repo.cache.remote > >/home/nec/GBS-ROOT-profile.tizen/local/order/.repo.cache > info: parsing package data... > info: building repo metadata ... > info: package dependency resolving ... > debug: Checking dependencies for sensor > debug: expansion error > debug: nothing provides libxml2-x86-arm needed by cmake-x86-arm > debug: nothing provides libcurl-x86-arm needed by cmake-x86-arm > debug: nothing provides expat-x86-arm needed by cmake-x86-arm > debug: nothing provides c-ares-x86-arm needed by cmake-x86-arm > debug: Checking dependencies for sensor > debug: expansion error > debug: nothing provides libxml2-x86-arm needed by cmake-x86-arm > debug: nothing provides libcurl-x86-arm needed by cmake-x86-arm > debug: nothing provides expat-x86-arm needed by cmake-x86-arm > debug: nothing provides c-ares-x86-arm needed by cmake-x86-arm > debug: my_system: sudo /bin/echo -n > info: package dependency: > sensor: > error: *** Error Summary *** > === the following packages failed to build due to missing build > dependencies (1) === > sensor: > nothing provides libxml2-x86-arm needed by cmake-x86-arm > nothing provides libcurl-x86-arm needed by cmake-x86-arm > nothing provides expat-x86-arm needed by cmake-x86-arm > nothing provides c-ares-x86-arm needed by cmake-x86-arm > > > gbs:error: Traceback (most recent call last): > File "/usr/bin/gbs", line 539, in <module> > sys.exit(main(sys.argv)) > File "/usr/bin/gbs", line 533, in main > return module.main(args) > File "/usr/lib/pymodules/python2.7/gitbuildsys/cmd_build.py", line 323, > in main > raise GbsError('rpmbuild fails') > GbsError: <gbs>rpmbuild fails > > > > My .gbs.conf file is this like: > > > > [general] > #Current profile name which should match a profile section name > tmpdir = /var/tmp > editor = > packaging_branch = master > upstream_branch = upstream > upstream_tag = upstream/${upstreamversion} > packaging_dir = packaging > profile = profile.tizen > buildroot = ~/GBS-ROOT/ > work_dir = ~/Tizen/Tizen2_2 > > > [profile.tizen] > # If no buildroot for profile, the buildroot in general section will be > used > buildroot = ~/GBS-ROOT-profile.tizen/ > # Specify build conf for a specific profile by using shell-style variable > references > buildconf = ${work_dir}/scm/meta/build-config/build.conf > #Common authentication info for whole profile > user = [uname] > #CAUTION: please use the key name "passwd" to reset plaintext password > passwdx = [hash_of_pword] > > #Comma separated list of repositories > repos = repo.tizen_main, repo.tizen_base > > > [repo.tizen_base] > url = > http://download.tizen.org/releases/2.2/latest/repos/tizen-base/armv7l/packages/ > > [repo.tizen_main] > url = > http://download.tizen.org/releases/2.2/latest/repos/tizen-main/armv7l/packages/ > > > ------------------------------ > > > NEC Technologies (UK) Ltd., > Company Registered Office: Imperium, Reading, Berkshire, RG2 0TD > Registered Number: 4072718 > Attention: > The information contained in this message and or attachments is intended > only for the person or entity to which it is addressed and may contain > confidential and/or privileged material. Any review, retransmission, > dissemination or other use of, or taking of any action in reliance upon, > this information by persons or entities other than the intended recipient > is prohibited. If you received this in error, please contact the sender and > delete the material from any system and destroy any copies. > > > _______________________________________________ > General mailing list > [email protected] > https://lists.tizen.org/listinfo/general > > > > > > Click > here<https://www.mailcontrol.com/sr/iNYHj5VwI9PGX2PQPOmvUnFKm77zQC2tfeyFyM7uZce2fNJhy9j+Nwg8Qu!faxTN41CAOKbjhdD3Y22mGO5KhQ==>to > report this email as spam. > > ------------------------------ > > NEC Technologies (UK) Ltd., > Company Registered Office: Imperium, Reading, Berkshire, RG2 0TD > Registered Number: 4072718 > Attention: > The information contained in this message and or attachments is intended > only for the person or entity to which it is addressed and may contain > confidential and/or privileged material. Any review, retransmission, > dissemination or other use of, or taking of any action in reliance upon, > this information by persons or entities other than the intended recipient > is prohibited. If you received this in error, please contact the sender and > delete the material from any system and destroy any copies. >
_______________________________________________ General mailing list [email protected] https://lists.tizen.org/listinfo/general
