I am able to run a elementary_test Now.., using elementary_test -to -glview ( & I see coloured Gears) But When i run browser , it says lib_Wayland.so cannot be found , & then It Gives a Segmentation fault. I searched & see lib_Wayland is there in bin directory..., Since my Platform doesn't support Wayland right now... It should fall back to X11 & run,
When I run elementary_test, even then I see same error that lib_wayland.so doesnt found, But the Elementary Test Runs up fine on Screen & Displayed on screen. Not Sure whats happening with browser, How do I debug it with GDB on board, & even Core dump file is not getting generated, where do i Look for Core dump btw.., I tried seeing in var/ folder but there is only one folder in /var/run .. Any Pointers...? -Alok On Mon, Nov 18, 2013 at 11:28 AM, Daniel Juyung Seo <[email protected]>wrote: > > > > On Mon, Nov 18, 2013 at 2:41 PM, Alok Gupta <[email protected]>wrote: > >> >> >> *Carsten,* >> >> *Could you please help me enabling some logs in EVAS or for Elementary >> Test , Is there any Standard Macro which I need to enable to get Logs for >> EFL/EVAS * >> >> >> *or If you can pinpoint me to some standard functions in EVAS/EFL where I >> can keep my logs to make sure everything in EFL/EVAS works out fine..Once a >> app is launched ??* >> *-Alok* >> >> > Check this out. > https://phab.enlightenment.org/w/einalog/ > > Thanks. > > Daniel Juyung Seo (SeoZ) > > >> >> >> On Sun, Nov 17, 2013 at 4:52 PM, Carsten Haitzler <[email protected]>wrote: >> >>> On Sun, 17 Nov 2013 19:21:00 +0900 Daniel Juyung Seo < >>> [email protected]> >>> said: >>> >>> > On Sun, Nov 17, 2013 at 3:07 PM, Carsten Haitzler <[email protected] >>> >wrote: >>> > >>> > > On Mon, 11 Nov 2013 09:37:42 +0530 Alok Gupta < >>> [email protected]> >>> > > said: >>> > > >>> > > > *Hi Carsten,* >>> > > > >>> > > > >>> > > > *When board boots up I get these Elementary Test logs * >>> > > > >>> > > > >>> > > > >>> > > > *ERR<1844>:evas-gl_x11 evas_x_main.c:124 eng_window_new() >>> eglGetDisplay() >>> > > > fail. code=0ERR<1844>:ecore_evas ecore_evas_x.c:299 >>> > > > _ecore_evas_x_gl_window_new() evas_engine_info_set() for engine >>> > > > 'opengl_x11' failed.ERR<1844>:ecore_evas ecore_evas_x.c:3854 >>> > > > ecore_evas_gl_x11_options_new() evas_engine_info_set() init engine >>> > > > 'opengl_x11' failed.CRI<1844>:elementary elm_win.c:2861 >>> elm_win_add() >>> > > > OpenGL engine creation failed. Trying default.* >>> > > > >>> > > > *Camera APP logs Shows below.., I see a Elemantary log here.. >>> Which Says >>> > > > OpenGL Engine creation failed..* & application exits, running from >>> > > > /usr/apps/org.tizen.camera---------------- >>> > > >>> > > this seems like somehow the fallback mechanisms in elm have just been >>> > > disabled/removed. this SHOULD work. i can only guess that tizen's >>> elm fork >>> > > has >>> > > this broken. i would need to check. at least from tizen 3 this fork >>> will >>> > > go and >>> > > >>> > >>> > Nope. It should never be broken and it wasn't. >>> > I need to check this with Alok. >>> > >>> > So, Alok, can you explain the detail about your environment, board, >>> and etc? >>> > It should work. >>> > >>> > Thanks. >>> > >>> > Daniel Juyung Seo (SeoZ) >>> >>> i see no log errs of it trying to fall back to software_x11 at all... >>> which it >>> should. thus i am suspicious as to what is going on here. unless he has >>> a build >>> where literally no software_x11 was even built >>> >>> > >>> > > it will sync from upstream. right now we're preparing the efl 1.8 >>> release >>> > > from >>> > > upstream. >>> > > >>> > > > *-sh-4.1# /usr/apps/org.tizen.camera-app/bin/camera >>> ERR<2029>:evas-gl_x11 >>> > > > evas_x_main.c:124 eng_window_new() eglGetDisplay() fail. >>> > > > code=0ERR<2029>:ecore_evas ecore_evas_x.c:299 >>> > > _ecore_evas_x_gl_window_new() >>> > > > evas_engine_info_set() for engine 'opengl_x11' >>> > > failed.ERR<2029>:ecore_evas >>> > > > ecore_evas_x.c:3854 ecore_evas_gl_x11_options_new() >>> > > evas_engine_info_set() >>> > > > init engine 'opengl_x11' failed.CRI<2029>:elementary elm_win.c:2861 >>> > > > elm_win_add() OpenGL engine creation failed. Trying >>> default.appcore: >>> > > > sf_check_rotation failed: -1appcore: sf_check_rotation failed: >>> > > > -1INF<2029>:multisense_factory multisense_factory.c:27 >>> > > > multisense_sound_player_get() Custom player_plugin = 0xb3ef8c3c * >>> > > > >>> > > > *Video APP logs Shows below.., I see a Elemantary log here.. Which >>> Says >>> > > > OpenGL Engine creation failed..* & application exits , running from >>> > > > /usr/apps/org/tizen.video----------------------- >>> > > > >>> > > > >>> > > > >>> > > > >>> > > > >>> > > > >>> > > > >>> > > > >>> > > > >>> > > > >>> > > > >>> > > > >>> > > > *-sh-4.1# /usr/apps/org.tizen.video-player/bin/video-player >>> appcore: >>> > > > sf_connect failed: -1ERR<2036>:evas-gl_x11 evas_x_main.c:124 >>> > > > eng_window_new() eglGetDisplay() fail. code=0ERR<2036>:ecore_evas >>> > > > ecore_evas_x.c:299 _ecore_evas_x_gl_window_new() >>> evas_engine_info_set() >>> > > for >>> > > > engine 'opengl_x11' failed.ERR<2036>:ecore_evas ecore_evas_x.c:3854 >>> > > > ecore_evas_gl_x11_options_new() evas_engine_info_set() init engine >>> > > > 'opengl_x11' failed.CRI<2036>:elementary elm_win.c:2861 >>> elm_win_add() >>> > > > OpenGL engine creation failed. Trying default.appcore: >>> sf_check_rotation >>> > > > failed: -1ERR<2036>:ecore_con ecore_con_local.c:152 >>> > > > ecore_con_local_connect() local connection failed: No such file or >>> > > > directoryERR<2036>: ecore_con.c:513 ecore_con_server_connect() >>> safety >>> > > check >>> > > > failed: ecore_con_local_connect(svr, _ecore_con_cl_handler, svr) is >>> > > > falseERR<2036>:ecore_evas ecore_evas_extn.c:1580 >>> > > > ecore_evas_extn_plug_connect() Extn plug failed to >>> connect:ipctype=0, >>> > > > svcname=elm_indicator_portrait, svcnum=0, >>> svcsys=0ERR<2036>:elementary >>> > > > elm_gesture_layer.c:3813 elm_gesture_layer_add() could not add >>> 0xb6ff4780 >>> > > > as sub object of 0xb6ff4620INF<2036>:multisense_factory >>> > > > multisense_factory.c:27 multisense_sound_player_get() Custom >>> > > player_plugin >>> > > > = 0xb3050c3c * >>> > > > >>> > > > >>> > > > *ThanksAlok G* >>> > > > >>> > > > >>> > > > On Sat, Nov 9, 2013 at 11:42 AM, Carsten Haitzler < >>> [email protected] >>> > > >wrote: >>> > > > >>> > > > > On Sat, 9 Nov 2013 10:35:03 +0530 Alok Gupta < >>> [email protected] >>> > > > >>> > > > > said: >>> > > > > >>> > > > > i don't remmber which apps require what in a raw tizen 2.2 image >>> - i >>> > > havent >>> > > > > seen a tizen2.2 build for a while (i've just seen our modified >>> ones >>> > > where >>> > > > > many >>> > > > > if not all of these apps have been changed). i DO know that the >>> > > browser has >>> > > > > tied itself to gl entirely, so all abstraction has gone. >>> > > > > >>> > > > > i don't know about camera or video player with regards to >>> forcing gl. i >>> > > > > don't >>> > > > > think they do. does elementary_test start at all? >>> > > > > >>> > > > > > *Crasten,* >>> > > > > > >>> > > > > > *I tried running couple of apps which would be using gl stuff >>> from >>> > > below >>> > > > > > mentioned paths in tizen* >>> > > > > > *so you want to say all of them are linked to hardware >>> rendering & >>> > > none >>> > > > > of >>> > > > > > it fallback to software rendering even when platform doesn't >>> support >>> > > any >>> > > > > > h/w / gl rendering for now as in my case...* >>> > > > > > >>> > > > > > * /usr/apps/org.tizen.browser/bin/browser* >>> > > > > > */usr/apps/org.tizen.videoplayer/bin/videoplayer* >>> > > > > > *......./bin/camera* >>> > > > > > >>> > > > > > *So long story short , even though if I use software_X11 as >>> engine >>> > > > > instead >>> > > > > > of opengl_x11 explicitly* >>> > > > > > *browser won't work.., how about video & camera apps?, i mean >>> for >>> > > which >>> > > > > all >>> > > > > > apps software_x11 works for ? * >>> > > > > > >>> > > > > > *-Alok* >>> > > > > > >>> > > > > > >>> > > > > > On Fri, Nov 8, 2013 at 7:57 PM, Carsten Haitzler < >>> > > [email protected] >>> > > > > >wrote: >>> > > > > > >>> > > > > > > On Fri, 8 Nov 2013 17:40:06 +0530 Alok Gupta < >>> > > [email protected] >>> > > > > > >>> > > > > > > said: >>> > > > > > > >>> > > > > > > evas support it, but the browser/web team have SPECIFICALLY >>> tied >>> > > > > themselves >>> > > > > > > to opengl only. so it won't work. as long as its not browser >>> and >>> > > the >>> > > > > app >>> > > > > > > dev >>> > > > > > > hasn't decided to totally force gl down your throat, evas >>> will >>> > > work in >>> > > > > > > software >>> > > > > > > and run relatively well. >>> > > > > > > >>> > > > > > > note - developers like for the web team have specifically >>> asked for >>> > > > > apis >>> > > > > > > to tie >>> > > > > > > themselves to gl - so this is a conscious choice, not a bug. >>> > > > > > > >>> > > > > > > > I need Some Help in running the Browser on Tizen (I have my >>> > > Tizen 2.2 >>> > > > > > > build >>> > > > > > > > Up & running) , I am trying to run a browser with Software >>> > > rendering >>> > > > > , >>> > > > > > > as I >>> > > > > > > > see evas supports multiple engines in Tizen >>> > > Opengl_x11,Software_x11, >>> > > > > > > > etc..,as I dont have Vendor SDK for Hardware rendering >>> right now >>> > > due >>> > > > > to >>> > > > > > > > some logical reasons, I want to run my app(browser) with >>> software >>> > > > > > > > rendering, Can anyone please guide me how to enable >>> software >>> > > > > rendering, >>> > > > > > > > does it has to be doen while building the tizen itself ?? >>> , When >>> > > I >>> > > > > run a >>> > > > > > > > browser through command prompt I get following Log >>> > > > > > > > >>> > > > > > > > > ERR<1442>:ecore_evas ecore_evas_x.c:264 >>> > > > > _ecore_evas_x_gl_window_new() >>> > > > > > > > > >>> > > > > > > > > evas_engine_info_set() for engine 'opengl_x11' failed. >>> > > > > > > > > >>> > > > > > > > > ERR<1442>:ecore_evas ecore_evas_x.c:3586 >>> > > > > > > ecore_evas_gl_x11_options_new() >>> > > > > > > > > evas_engine_info_set() init engine 'opengl_x11' failed. >>> > > > > > > > > >>> > > > > > > > > CRI<1442>:elementary elm_win.c:2620 elm_win_add() OpenGL >>> engine >>> > > > > > > creation >>> > > > > > > > > failed. Trying default. >>> > > > > > > > > >>> > > > > > > > > CRI<1442>:evas_main main.c:114 evas_debug_magic_wrong() >>> Input >>> > > > > object is >>> > > > > > > > > wrong type >>> > > > > > > > > >>> > > > > > > > > * & browser doesnt comes up... >>> > > > > > > > > >>> > > > > > > > > I am not sure what is missing, I tried to look for mesa >>> libs >>> > > using >>> > > > > rpm >>> > > > > > > -qa >>> > > > > > > > > but tried to install the required rpm(mesa) but then I >>> started >>> > > > > getting >>> > > > > > > > > error for some xproto,xext packages missing. >>> > > > > > > > > >>> > > > > > > > > I just want to fall back to software rendering. >>> > > > > > > > > >>> > > > > > > > > Any seniors can provide some pointers in this regard >>> will be >>> > > very >>> > > > > > > helpful. >>> > > > > > > > > >>> > > > > > > > > PS: My X server is running.. >>> > > > > > > > > >>> > > > > > > > > >>> > > > > > > >>> > > > > > > >>> > > > > > > -- >>> > > > > > > Carsten Haitzler (The Rasterman) <[email protected]> >>> > > > > > > >>> > > > > >>> > > > > >>> > > > > -- >>> > > > > Carsten Haitzler (The Rasterman) <[email protected]> >>> > > > > >>> > > >>> > > >>> > > -- >>> > > Carsten Haitzler (The Rasterman) <[email protected]> >>> > > _______________________________________________ >>> > > General mailing list >>> > > [email protected] >>> > > https://lists.tizen.org/listinfo/general >>> > > >>> >>> >>> -- >>> Carsten Haitzler (The Rasterman) <[email protected]> >>> >> >> >
_______________________________________________ General mailing list [email protected] https://lists.tizen.org/listinfo/general
