Thanks Leon. > I've mounted them to a bootable microSD card and I put Tizen images > (platform.img, data.img and UMS.img) on top of it. Does the order of copying the files matters here? My MMC is partitioned with 2 partitions-one for boot(FAT) and other for filesystem(ext2).Which partition should I copy the files in?? Any other changes to be done so that kenrel picks up the platform,data and UMS files after booting up..?? Regards, Prathamesh
-----Original Message----- From: Leon Anavi [mailto:[email protected]] Sent: 18 November 2013 14:15 To: Prathamesh P Ghanekar Cc: [email protected] Subject: RE: [Tizen General] Tizen on Raspbery pi? Hi Prathamesh, On 2013-11-18 04:57, Prathamesh P Ghanekar wrote: > Hi Leon, > > My query goes on the similar lines. I am trying to port TIZEN IVI to > the Freescale i.MX6 board. As you suggested, I am following GBS build > process. > I referred to the Porting guide for pandaboard. >> >> >> >> >> s://wiki.tizen.org/wiki/Tizen_IVI_Getting_Started_Guide_For_PandaBoar >> d > But, I am not able to understand as to what will be the output of GBS > build. > > My question goes as follows: > > Do we get bootloader,uImage,filesystem(modules,drivers etc.) bundled > together in the image, when we perform GBS build?? > Or we need to compile kernel separately by conventional GNU make and > then run the GBS-built image on top of it?? For the Tizen port to Allwinner ARMv7 devices that I am working on I had to build for scratch u-boot (boot loader) and a linux-sunxi kernel specially for the board that I own. I've mounted them to a bootable microSD card and I put Tizen images (platform.img, data.img and UMS.img) on top of it. I guess you should check the documentation of your dev board and do the same for it. Each dev board has a different hardware and a specific boot loader must be used. In my case I followed this guide: b.com/linux-sunxi/u-boot-sunxi/wiki#how-to-make-a-bootable-sunxi-sd-card The process is similar for PandaBoard. The wiki article contains sections for "Building the Bootloaders" and "Building the kernel" which are compatible with PandaBoard. Best regards, Leon > > I am really confused!! > > Thanks in advance, > Prathamesh Ghanekar > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Leon Anavi > Sent: 15 November 2013 12:47 > To: [email protected] > Subject: Re: [Tizen General] Tizen on Raspbery pi? > > Hi, > > On 2013-11-15 08:06, plus kri wrote: >> Is this possible? I know that Raspberry is rather limited but is it >> too limited? > > Although I haven’t tried it in my opinion the hardware of Raspberry Pi > is quite limited and I guess it will be a tough job to make Tizen and > its GUI work fine on it. > > Raspberry Pi comes with ARM1176JZF-S ARM11 CPU core which implements > the > ARMv6 architecture. So this means that you have to create a Tizen > Platform image from scratch through local build using GBS > (git-build-system) for ARMv6. According to the documentation GBS build > supports x86_64, i586, ARMv6l, ARMv7hl and ARM7l architectures. So you > can give it a try :) > > The Tizen wiki contains an article about porting Tizen 2 IVI to > PandaBoard which is a good starting point if you want to port Tizen to > Raspberry Pi: > > > > ps://wiki.tizen.org/wiki/Tizen_IVI_Getting_Started_Guide_For_PandaBoar > d > > Btw I have successfully booted Tizen 2 on dev board > A10S-OLinuXino-MICRO with Allwinner A10S (ARMv7). I recently bought > another board with A20 CPU and I'll soon try to boot Tizen on it too. > Boards with Allwinner > ARMv7 CPUs such as Cubieboard and OLinuXino are more powerful than > Raspberry Pi and in my opinion they are the better option for > experiments with Tizen. Here is a short tutorial about booting Tizen > on Allwinner using Linux-sunxi kernel: > https://github.com/leon-anavi/tizen-sunxi > > Best regards, > Leon > > >> _______________________________________________ >> General mailing list >> [email protected] >> https://lists.tizen.org/listinfo/general > > -- > http://anavi.org/ > _______________________________________________ > General mailing list > [email protected] > https://lists.tizen.org/listinfo/general > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > mer~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > Information contained and transmitted by this e-mail is confidential > and proprietary to iGATE and its affiliates and is intended for use > only by the recipient. If you are not the intended recipient, you are > hereby notified that any dissemination, distribution, copying or use > of this e-mail is strictly prohibited and you are requested to delete > this e-mail immediately and notify the originator or > [email protected] <mailto:[email protected]>. iGATE does not enter > into any agreement with any party by e-mail. Any views expressed by an > individual do not necessarily reflect the view of iGATE. iGATE is not > responsible for the consequences of any actions taken on the basis of > information provided, through this email. The contents of an > attachment to this e-mail may contain software viruses, which could > damage your own computer system. While iGATE has taken every > reasonable precaution to minimise this risk, we cannot accept > liability for any damage which you sustain as a result of software > viruses. You should carry out your own virus checks before opening an > attachment. To know more about iGATE please visit www.igate.com > <http://www.igate.com>. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -- http://anavi.org/ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Disclaimer~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Information contained and transmitted by this e-mail is confidential and proprietary to iGATE and its affiliates and is intended for use only by the recipient. If you are not the intended recipient, you are hereby notified that any dissemination, distribution, copying or use of this e-mail is strictly prohibited and you are requested to delete this e-mail immediately and notify the originator or [email protected] <mailto:[email protected]>. iGATE does not enter into any agreement with any party by e-mail. Any views expressed by an individual do not necessarily reflect the view of iGATE. iGATE is not responsible for the consequences of any actions taken on the basis of information provided, through this email. The contents of an attachment to this e-mail may contain software viruses, which could damage your own computer system. While iGATE has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening an attachment. To know more about iGATE please visit www.igate.com <http://www.igate.com>. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _______________________________________________ General mailing list [email protected] https://lists.tizen.org/listinfo/general
