Required arch is MIPS, and there are no initial RPMs for this arch. Regards, Andriy.
On Mon, Mar 17, 2014 at 4:50 PM, Zhang, Qiang Z <[email protected]>wrote: > HI Andriy, > > > > Sorry, I have no experience on this. > > > > Which arch do you want to build? > > > > If it's common, you can download some initial rpms from > http://download.opensuse.org/repositories/ , where you can find some > initial binary for common arches. > > > > Thanks > > Qiang > > > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Andriy Prystupa > *Sent:* Monday, March 17, 2014 3:51 PM > *To:* Zhang, Qiang Z > *Cc:* [email protected] > *Subject:* Re: [Tizen General] Tizen pre-built packages build procedure > > > > Hi Qiang, > > > > This way works for case when we have at least pre-built packages and want > to rebuild some of them. > > In my case there is no any prebuilt-package. > > I guess I need some init set of rpms - crosstoolchain, libc, binutils, > etc... And this is chicken-egg issue, gbs needs theses rpms. > > Any guide for preparing these rpms? > > Or this should be done manually outside gbs? > > > > Regards, > > Andriy. > > > > On Mon, Mar 17, 2014 at 4:23 AM, Zhang, Qiang Z <[email protected]> > wrote: > > --exclude option should be used here to exclude building special packages > in cycles and break the cycles. > > > > So take filesystem and setup as an example, you need to run: > > > > $ gbs build -exclude=filesystem .... # setup will be build out > > $ gbs build -exclude=setup ... # filesystem will be built this time > > > > So, two commends is needed for one cycles. > > > > Thanks > > Qiang > > > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Andriy Prystupa > *Sent:* Friday, March 14, 2014 5:15 PM > *To:* [email protected] > *Subject:* [Tizen General] Tizen pre-built packages build procedure > > > > Hi all, > > > > I am working on adding new arch for Tizen build. And I encountered issue > with building rpm's that usually loacted in repo "pre-built". There are lot > of cyclic dependencies, and I cant build them with gbs. > > Is there any special procedure to build them? > > > > In example how to build: > > platform/upstream/filesystem > > platform/upstream/setup > > > > Best regards, > > > > -- > > *Andriy Prystupa | SW Engineer* > GlobalLogic > P +x.xxx.xxx.xxxx M +38.097.330.9412 S prandriy > www.globallogic.com > > http://www.globallogic.com/email_disclaimer.txt > > > > > > -- > > *Andriy Prystupa | SW Engineer* > GlobalLogic > P +x.xxx.xxx.xxxx M +38.097.330.9412 S prandriy > www.globallogic.com > > http://www.globallogic.com/email_disclaimer.txt > -- Andriy Prystupa | SW Engineer GlobalLogic P +x.xxx.xxx.xxxx M +38.097.330.9412 S prandriy www.globallogic.com <http://www.globallogic.com/> http://www.globallogic.com/email_disclaimer.txt
_______________________________________________ General mailing list [email protected] https://lists.tizen.org/listinfo/general
