Hi Geoffroy, I tried adding that piece of code to the kickstarter file, but it didn't work in my build, so I've probably put it in the wrong place, or something. an easier solution was to create a file called keyboard.conf (in my case) in /etc/modules-load.d/ and just add the line 'atkbd' in it. Of course I can only do this after using a usb keyboard to create the file, but I'd love to know how I could include this file in the build so that the laptop keyboard and mouse is available after new image installation.
I no longer have the ethernet driver problem, as r8169.ko is already included in the October 2014 release image, so ethernet is usable straight away. Thanks a million! Mike MICHAEL JOHNSON Embedded Software Engineer Symphony Teleca Sunley House, 46 Jewry Street, Winchester, Hampshire, SO23 8RY Phone: +441962868866, Fax: +441962868867 [email protected]<mailto:[email protected]> www.symphonyteleca.com<http://www.symphonyteleca.com> Teleca Limited, a company registered in England & Wales, registration number 2773878, registered office at Sunley House, 46 Jewry Street, Winchester, Hampshire SO23 8RY. VAT registration number GB 674 6583 90 Follow what's going on at Symphony Teleca's blog on www.symphonyteleca.com/blog<http://www.symphonyteleca.com/blog>. Please consider the environment before you print. Notice to recipient: This e-mail (including any attachments) is meant for the intended recipient only, may contain confidential and proprietary information, and is protected by law. If you received this e-mail in error, please immediately notify the sender of the error by return e-mail, delete this communication and any attachments, and shred any printouts. Unauthorized review, use, dissemination, distribution, copying or taking of any action based on this communication is strictly prohibited. ________________________________ From: General [[email protected]] on behalf of Michael Johnson [[email protected]] Sent: 28 August 2014 11:03 AM To: Maciej Wereski Cc: [email protected] Subject: Re: [Tizen General] Drivers for keyboard, mouse and ethernet Hi, I'm using IVI. Actually Geoffroy offered a possible solution as below: Another alternative is to build your own ‘clean’ image by slightly modifying the kickstart file. E.g.: pick up the latest kickstart file: http://download.tizen.org/releases/daily/tizen/ivi/latest/images/atom/ivi-mbr-i586/tizen-ivi_20140826.3_ivi-mbr-i586.ks And add this in the %post section somewhere # Add a rule to load the atkbd driver on <your machine> cat > /etc/udev/rules.d/99-atkbd.rules <<EOF KERNEL=="id", SUBSYSTEM=="dmi", ATTR{sys_vendor}=="VMware, Inc.", RUN+="/sbin/modprobe atkbd" EOF You’ll have to adjust the sys_vendor to your own machine or you could make the rule much more generic to unconditionally load atkbd (if you don’t care about boot time for now). That’s not quite the same as getting a ‘clean’ image but it’s close ;-) I'll be trying that soon. Regards Mike MICHAEL JOHNSON Embedded Software Engineer Symphony Teleca Sunley House, 46 Jewry Street, Winchester, Hampshire, SO23 8RY Phone: +441962868866 [email protected]<mailto:[email protected]> www.symphonyteleca.com<http://www.symphonyteleca.com> [Linkedin]<http://www.linkedin.com/company/4301?trk=tyah> [Twitter] <https://twitter.com/symphony_teleca> [Facebook] <https://www.facebook.com/SymphonyTelecaCorp> ________________________________ [cid:[email protected]]<http://www.symphonyteleca.com/together> Teleca Limited, a company registered in England & Wales, registration number 2773878, registered office at Sunley House, 46 Jewry Street, Winchester, Hampshire SO23 8RY. VAT registration number GB 674 6583 90 Follow what's going on at Symphony Teleca's blog on www.symphonyteleca.com/blog<http://www.symphonyteleca.com/blog>. Please consider the environment before you print. Notice to recipient: This e-mail (including any attachments) is meant for the intended recipient only, may contain confidential and proprietary information, and is protected by law. If you received this e-mail in error, please immediately notify the sender of the error by return e-mail, delete this communication and any attachments, and shred any printouts. Unauthorized review, use, dissemination, distribution, copying or taking of any action based on this communication is strictly prohibited. ________________________________ From: General [[email protected]] on behalf of Maciej Wereski [[email protected]] Sent: 28 August 2014 9:43 AM To: [email protected] Subject: Re: [Tizen General] Drivers for keyboard, mouse and ethernet Hello, 27.08.2014 at 19:47 Michael Johnson <[email protected]> wrote: Hi all, Any chance we can add the atkbd module and the r8168 ethernet driver module to the kernel? I'm using a Dell Vostro as a target machine, and have to set up a VM every time I need to build the ethernet driver for a new image, since I can't use the network on the target to install the development rpms. Which profile are you using? Common? IVI? I've kept copies of the ethernet driver for the images I've already built for, but going forward, it would save me a lot of hassle having to do this for each new release. I think, that on [Dev] ML your message might get better response. Also there is another solution: you can send patch for review on gerrit <https://review.tizen.org/gerrit/#/> :) Thanks Mike [cut] regards, -- Maciej Wereski Samsung R&D Institute Poland Samsung Electronics [email protected]
_______________________________________________ General mailing list [email protected] https://lists.tizen.org/listinfo/general
