Hi Marico,
If I correctly understand, you installed the arm-x11 binary, right?
you know, there is two type of binary, arm-x11 and arm-wayland in Tizen:Common.
and as I know, arm-x11 does not contain the wayland, and even support X11 display server not yet(in progress, therefore if you saw black screen, it's natural), and enlightenment in arm-x11 can be launched only as a window manager under Xserver.
arm-wayland binary has a wayland package, and you can play wayland there.
but probably, NO Enlightenment Wayland support yet..., but weston is OK... :)
------- Original Message -------
Sender : Marico Xu<[email protected]>
Date : 2014-11-21 00:26 (GMT+09:00)
Title : Re: [Tizen General] how to start enlightment or X in tizen 3.0
Thanks Gwanglim and Leon ,
But in my current environment, there is no ddx driver like exynos_drv.so, which will lead the failure of starting X.
And here are my steps to set up the environment with Odriod X2, could you help me to figure out what's wrong ? thanks in advance : )
At first, I tried to follow the wiki https://wiki.tizen.org/wiki/How_to_Build_and_Load_Tizen_on_Odroid_U3:
Download the uboot-tizen and try to build it (p.s. GBS cannot work in the branch, and I try to build it manually)
Prepare the partitions for tizen3.0, and use lthor to get the system image downloaded from http://download.tizen.org/releases/system/Tizen_RD-ODROID-U3_System_20141113.tar.gz,
and common package from http://download.tizen.org/releases/daily/tizen/common/tizen-common_20141118.1/images/arm-x11/common-x11-3parts-armv7l-odroidu3/tizen-common_20141118.1_common-x11-3parts-armv7l-odroidu3.tar.gz
Then the platform can boot up successfully, but the display still show the black.
At last, download the mali ddk from https://source.tizen.org/mali-ddk-tizen-3.0-wayland-enabled, and install it in the target, but it seems that there is still no ddx driver and Weston in the system
-----Original Message-----
From: Gwanglim Lee [mailto:[email protected]]
Sent: Thursday, November 20, 2014 7:35 PM
To: Leon Anavi; Marico Xu
Cc: [email protected]
Subject: Re: Re: [Tizen General] how to start enlightment or X in tizen 3.0
Hi Marico,
enlightenment in tizen 3.0 common is an x window manager and it can't support wayland display server yet.
Thus you need to start X server before running enlightenment if you want to run enlightenment.
BR,
Gwanglim
------- Original Message -------
Sender : Leon Anavi
Date : 2014-11-20 19:05 (GMT+09:00)
Title : Re: [Tizen General] how to start enlightment or X in tizen 3.0
Hi Marico,
On 2014-11-20 11:42, Marico Xu wrote:
> 1. After flash the packages from the daily build to the platform, the
> system boot up successfully, but the display still show the blank, and
> I didn't see "/dev/fb0" in the system, then should it be ok? And how
> to fix the blank issue?
Are you using frame buffer or you have graphical acceleration enabled on this board?
Recently I had a blank screen issue on Radxa Rock while I was using Weston and wayland with frame buffer support and I solved by settings the resolution with fbset before launching Weston.
> 2. It seems that in tizen3.0 we don't need X at all, and just use
> wayland, right? And then I want to start enlightenment without X but
> it failed.
Actually Tizen:Common 3.0 is available with Wayland or with X11.
Although Wayland is preferred. Have a look at the available images here:
http://download.tizen.org/snapshots/tizen/common/latest/images/
The Tizen:Common with Wayland comes with Weston (a reference implementation of a Wayland compositor) which is started by systemd unit called display-manager-run.service. This services executes the following command to start Weston:
/usr/bin/weston --backend=fbdev-backend.so -i0 --log=%h/weston.log
Best regards,
Leon
> How should I add the parameter to "enlightenment_start" to start
> wayland successfully?
>
> BEST REGARDS
>
> MARICO
>
> -- IMPORTANT NOTICE: The contents of this email and any attachments
> are confidential and may also be privileged. If you are not the
> intended recipient, please notify the sender immediately and do not
> disclose the contents to any other person, use it for any purpose, or
> store or copy the information in any medium. Thank you.
>
> ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ,
> Registered in England & Wales, Company No: 2557590 ARM Holdings plc,
> Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in
> England & Wales, Company No: 2548782
>
> _______________________________________________
> General mailing list
> [email protected]
> https://lists.tizen.org/listinfo/general
--
http://anavi.org/
_______________________________________________
General mailing list
[email protected]
https://lists.tizen.org/listinfo/general
-- IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2557590
ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered in England & Wales, Company No: 2548782
_______________________________________________
General mailing list
[email protected]
https://lists.tizen.org/listinfo/general
| Lee, Seung-Hun
Assistant Engineer |
|
|
_______________________________________________ General mailing list [email protected] https://lists.tizen.org/listinfo/general
