Hi Vamsikiran,
Why are you interested in porting Tizen 2.2 to PandaBoard? This version
of the platform is a bit outdated.
Most of the Samsung devices with Tizen on the market are running version
2.3 and for development boards you can use Tizen:Common or Tizen IVI.
Tizen:Common in already available for MinnowBoard MAX and popular ARM
development boards: Olimex OLinuXino boards with Allwinner A20 and A10
SoC, Radxa Rock with Rockchip RK3188, Firefly-RK3288, Odroid-U3, Renesas
R-CAR M2, etc. If there is no particular reason I highly recommend you
to try to port Tizen:Common or another Tizen 3 profile based on it to
PandaBoard. Btw long ago there was a port of Tizen 2.0 for PandaBoard
but as far as I know it is no longer maintained.
Best regards,
Leon
On Thu, Mar 5, 2015 at 2:48 PM, Vamsikiran D <[email protected]
<mailto:[email protected]>> wrote:
Hi
I was trying to port tizen 2.2 to pandaboard.
After the following logs on console, the pandaboard is getting
powered off.
I was using the kickstart file of RD-210.ks
Can you please let me know, what could be the issue?
[ 2.068664] OMAP4 PM: u-boot >= v2012.07 is required for full
PM support
[ 2.075897] ThumbEE CPU extension supported.
[ 2.080505] Registering SWP/SWPB emulation handler
[ 2.088470] VANA: incomplete constraints, leaving on
[ 2.095123] VDAC: incomplete constraints, leaving on
[ 2.100982] vdd_core: incomplete constraints, leaving on
[ 2.106719] vdd_iva: incomplete constraints, leaving on
[ 2.112274] vdd_mpu: incomplete constraints, leaving on
[ 2.118377] VUSB: incomplete constraints, leaving on
[ 2.123687] hsusb1_vcc: incomplete constraints, leaving on
[ 2.129547] hsusb1_reset: incomplete constraints, leaving on
[ 2.135589] vwl1271: incomplete constraints, leaving on
[ 2.141204] regulator-dummy: incomplete constraints, leaving on
[ 2.150909] twl_rtc twl_rtc: setting system clock to 2000-01-01
00:00:00 UTC)
[ 2.163024] Waiting for root device /dev/mmcblk0p2...
[ 2.225860] mmc0: host does not support reading read-only
switch. assuming w.
[ 2.238739] mmc0: new high speed SDHC card at address e624
[ 2.246246] mmcblk0: mmc0:e624 SU08G 7.40 GiB
[ 2.261383] mmcblk0: p1 p2 p3 p4
[ 2.287658] EXT3-fs (mmcblk0p2): error: couldn't mount because
of unsupporte)
[ 2.299774] EXT2-fs (mmcblk0p2): error: couldn't mount because
of unsupporte)
[ 2.341308] EXT4-fs (mmcblk0p2): warning: mounting unchecked
fs, running e2fd
[ 2.355987] EXT4-fs (mmcblk0p2): mounted filesystem with
ordered data mode. )
[ 2.364715] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 2.373474] devtmpfs: mounted
[ 2.377044] Freeing unused kernel memory: 388K (c06fa000 -
c075b000)
Welcome to Tizen 2.2.0 (Tizen)!
Thanks & Regards
Vamsi Kiran
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
_______________________________________________
General mailing list
[email protected] <mailto:[email protected]>
https://lists.tizen.org/listinfo/general
--
Leon Anavi
Software Engineer
Mob : +359 88 527 7901
konsulko.com
_______________________________________________
General mailing list
[email protected]
https://lists.tizen.org/listinfo/general
