Hello Martijn, I have no clue what's going wrong on your x201 but expect that Norman uses Turmvilla with slightly modified version of the mentioned brnach. What puzzles me in you log are the following lines.
> [init -> wifi_drv] no net device registered! > [init -> wifi_drv] nl80211: Driver does not support > authentication/association or connect commands > [init -> wifi_drv] nl80211: Remove monitor interface: refcount=0 > [init -> wifi_drv] netlink: Operstate: ifindex=1 linkmode=0 (kernel-control), > operstate=6 (IF_OPER_UP) > [init -> wifi_drv] no net device registered! > [init -> wifi_drv] nl80211: Set mode ifindex 1 iftype 2 (STATION) > [init -> wifi_drv] nl80211: Failed to set interface 1 to mode 2: -19 > (Operation not supported by device) > [init -> wifi_drv] wlan0: Failed to initialize driver interface > [init -> wifi_drv] Failed to add interface wlan0 > [init -> wifi_drv] wlan0: Cancelling scan request > [init -> wifi_drv] wlan0: Cancelling authentication timeout Could it be your wlan_configuration is somewhat corrupted or uses invalid syntax? I never saw our driver complaining about the STATION thing before. Greets -- Christian Helmuth Genode Labs https://www.genode-labs.com/ · https://genode.org/ https://twitter.com/GenodeLabs · /ˈdʒiː.nəʊd/ Genode Labs GmbH · Amtsgericht Dresden · HRB 28424 · Sitz Dresden Geschäftsführer: Dr.-Ing. Norman Feske, Christian Helmuth ------------------------------------------------------------------------------ _______________________________________________ genode-main mailing list genode-main@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/genode-main
