On 03/05/2018 08:05 AM, Alexander Boettcher wrote:
Hi,
On 04.03.2018 08:22, John J. Karcher wrote:
Actually, while the problems at SourceForge were delaying the mailing
list, I solved part of my problem. Details below...
On 03/01/2018 11:14 PM, John J. Karcher wrote:
Hello,
I have downloaded, built, and begun testing Sculpt EA, following the
instructions linked to in the 18.02 release notes. Everything went
well during the build process.
Since I primarily run everything I do in VirtualBox (and don't have
the recommended hardware anyway), I created a VM as close to the
recommendations as possible.
It will work until the point where you try to start a VM in Sculpt,
which will not run because VirtualBox don't support nested virtualization.
That's all I need! Could you send me the configuration for a working
VM? My virtual SATA drive is not recognized if using PIIX3.
("VBoxManage showvminfo" is verbose, but we don't have to worry about
missing anytihng.)
[drivers -> platform_drv] Error: runtimne -> nic -> nic: assignment of
PCI device 0:11.0 failed phys=0xdc088000 virt=0x1000
This is a normal message if you have no IOMMU support, which virtualbox
doesn't provide to guests. You may just ignore (and we have to silence
the output in the future.)
That's good to know.
...
[runtimne -> nic -> nic] bus_addr = e2420000 len = 20000
...
[drivers -> platform_drv] 0:11.0 uses IRQ, vector 0xb, non-maskable
This is closer to the hardware than I usually get these days. Is there
anything I can try?
It sounds like the issue reported in
https://github.com/genodelabs/genode/issues/1044 - unfortunately there
has been no solution for ICH9 and network, but a quirk for PCIIX3 and
network exists. Maybe you can report there your findings, if you have
some news.
Interesting. The log output of "download.config" doesn't contain the
network-related errors when using PIIX3 - hopefully that's a good sign.
(Without storage, I can't tell if it actually works, of course.)
Thanks!
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
genode-main mailing list
genode-main@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/genode-main
