Hello,
It was pretty basic. On building, our build directory had no config file in
var/run/demo. The build process itself is somehow not configured properly
like every other platform. Back to the drawing board. Apologies if it
sounded trivial.
Regards
Aditya
On Wed, Feb 19, 2014 at 4:25 PM, Aditya Kousik <[email protected]>wrote:
> Hello all,
>
> Continuing on our efforts to provide a Genode port to Freescale i.MX6, we
> tried running the demo scenario by simply porting the extensive i.MX53
> driver written by Stefan; i.MX6 is merely an upgrade but it still uses same
> IPU defs, except for different address spaces for the registers which were
> appropriately modified.
>
> A subsequent compilation and boot of the image resulted in the following
> error: Any thoughts on how to tackle ?
>
> [init -> fb_drv] Could not open file "config"
> [init -> fb_drv] Could not obtain config file
> no RM attachment (faulter 1059508c with IP 1000861c attempts to write to
> address 244000)
> unknown signal context
>
> Thanks and Regards
> Aditya.
>
------------------------------------------------------------------------------
Managing the Performance of Cloud-Based Applications
Take advantage of what the Cloud has to offer - Avoid Common Pitfalls.
Read the Whitepaper.
http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk
_______________________________________________
Genode-main mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/genode-main
