Hello,
I am trying to porte a system using a rich environment and a TEE from i.MX53 to i.MX6. This system uses genode and TrustZone. I think genode start well but it stops after the decompression of Linux. I have tried different tricks found on the web but nothing works. Can you help me ? Thank you in advance, Antoine U-Boot 2009.08 (Mar 20 2014 - 10:49:44) CPU: Freescale i.MX6 family TO1.2 at 792 MHz Thermal sensor with ratio = 190 Temperature: 31 C, calibration data 0x5b55137d mx6q pll1: 792MHz mx6q pll2: 528MHz mx6q pll3: 480MHz mx6q pll8: 50MHz ipg clock : 66000000Hz ipg per clock : 66000000Hz uart clock : 80000000Hz cspi clock : 60000000Hz ahb clock : 132000000Hz axi clock : 264000000Hz emi_slow clock: 132000000Hz ddr clock : 528000000Hz usdhc1 clock : 198000000Hz usdhc2 clock : 198000000Hz usdhc3 clock : 198000000Hz usdhc4 clock : 198000000Hz nfc clock : 24000000Hz Board: i.MX6Q-SABRESD: unknown-board Board: 0x63012 [POR ] Boot Device: SD I2C: ready DRAM: 1 GB MMC: FSL_USDHC: 0,FSL_USDHC: 1,FSL_USDHC: 2,FSL_USDHC: 3 In: serial Out: serial Err: serial Found PFUZE100! deviceid=10,revid=11 Net: got MAC address from IIM: 00:04:9f:02:b4:14 FEC0 [PRIME] Hit any key to stop autoboot: 3 \0x08\0x08\0x08 2 \0x08\0x08\0x08 1 \0x08\0x08\0x08 0 mmc2 is current device MMC read: dev # 2, block # 2048, count 9216 ... 9216 blocks read: OK ## Booting kernel from Legacy Image at 10800000 ... Image Name: Image Type: ARM Linux Kernel Image (gzip compressed) Data Size: 4536855 Bytes = 4.3 MB Load Address: 10001000 Entry Point: 10001000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel ... int main(): \0x1b[33m--- create local services ---\0x1b[0m int main(): \0x1b[33m--- start init ---\0x1b[0m int main(): \0x1b[33mtransferred 505 MB to init\0x1b[0m int main(): \0x1b[33m--- init created, waiting for exit condition ---\0x1b[0m [init] parent provides [init] service "ROM" [init] service "RAM" [init] service "IRQ" [init] service "IO_MEM" [init] service "CAP" [init] service "PD" [init] service "RM" [init] service "CPU" [init] service "LOG" [init] service "SIGNAL" [init] service "VM" [init] child "tz_vmm" [init] RAM quota: 8126464 [init] ELF binary: tz_vmm [init] priority: 0 [init -> tz_vmm] \0x1b[32mStart virtual machine ...\0x1b[0m Uncompressing Linux... done, booting the kernel. \0x00\0x00\0x00\0x00\0x00\0x00\0x00\0x00\0x00\0x00\0x00\0x00
------------------------------------------------------------------------------
_______________________________________________ Genode-main mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/genode-main
