Hi Jaemin,
On 12.03.2015 12:54, JaeminPark wrote:
> Hi, Martin.
>
> I used hw_imx53_tz build directory to build tz_vmm scenario.
> However, I’m not sure whether I did the right thing regard of “u-boot”.
>
> I’m posting my etc/specs.conf as follows (only 2 lines):
> /SPECS = genode hw_imx53_qsb_tz/
> /SPECS += perf_counter/
Thank you, that looks good.
>
> I just performed the following procedure to build and install u-boot
> to my sdcard posted
> in
> https://tthtlc.wordpress.com/2015/02/21/getting-genode-with-trustzone-on-the-i-mx53-quick-start-board/.
This article, despite giving a rough guide on what is needed, is
unfortunately based on an old version of Genode and contains some
significant misconceptions. Most substantial for you: The Uboot version
it uses is tailored to 'tz_vmm' on the USB-Armory while the Linux
version is tailored to 'tz_vmm' on the i.MX53-QSB.
Even though Genode is still coming up, I suppose that Linux collides
with the unexpectedly altered hardware initialization. The version I'm
using says "U-Boot 2014.07-rc1-02695-g3ab9a12 (Jun 25 2014 - 13:17:24)".
However, I can't tell which sources we used for building it (we simply
google'd for it back then) but what is for sure is that we didn't
patched the sources for 'tz_vmm'.
Cheers,
Martin
------------------------------------------------------------------------------
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the
conversation now. http://goparallel.sourceforge.net/
_______________________________________________
genode-main mailing list
genode-main@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/genode-main
