Hi, I have built uImage using Genode OS Framework for IMX6 Sabre SDBoard. I am getting error as cannot get kernel image. My built uImage is 7858662 Bytes = 7.5 MB I used following commands to flash u-boot and uImage respectively (It is a 16GB microsdcard) $sudo dd if=u-Boot-mx6q-sabresd-no-padding.bin of=/dev/sdc bs=512 seek=2 conv=fsync $sudo dd if=uImage of=/dev/* bs=512 seek=2048 conv=fsync When I inserted the SDCard to the board and tried to boot, it is giving the following error: ## Booting kernel from Legacy Image at 10800000 ... Image Name: Image Type: ARM Linux Kernel Image (gzip compressed) Data Size: 7858662 Bytes = 7.5 MB Load Address: 10001000 Entry Point: 10001000 Verifying Checksum ... Bad Data CRC ERROR: can't get kernel image!
So, I thought of of changing please try Load Address: 10800000 as per this post. https://community.freescale.com/message/510211#510211 How can I change the Load address. Please suggest. ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ genode-main mailing list genode-main@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/genode-main
