Hey Yevgeny, Am 17.04.2016 um 09:09 schrieb Yevgeny: > Yes, I've already tried: make run/tz_vmm, however, it doesn't create the > *uImage* in the *var/run/tz_vmm/* directory.
A run script merely contains the common set-up of a Genode scenario. Thus, it doesn't create bootloader-specific output like a uImage. For such customization there is the file <builddir>/etc/build.conf. In your case you would need to add a line: RUN_OPT += --include image/uboot This is also documented in [1]. I think it would be the best if follow the tutorial in there. It describes the complete process how to create a bootable SD card with the tz_vmm script. > I started off with this tutorial: > https://github.com/inversepath/usbarmory/wiki/Genode-OS and everything > went fine untill this point: cp var/run/tz_vmm/uImage to SD_CARD. Err: > no such file or directory" The Wiki recently was updated as the previous version seemed to cause misconceptions. Please check out the new version. > I've taken the following steps provided in the first link of you msg. > export TARGET_DEV=/dev/sdX > cd genode-16.02 > ./tool/create_builddir hw_usb_armory > ./tool/create_uboot hw_usb_armory > sudo dd if=contrib/uboot/build/hw_usb_armory/mmc_img of=$TARGET_DEV > bs=1K seek=1 conv=fsync > cd genode-16.02/build/hw_usb_armory/ > echo "RUN_OPT += --include image/uboot" >> etc/build.conf > make run/tz_vmm > > and ended up with the following error: > > couldn't execute "mkimage": no such file or directory I assume thta this is related to the above problems. Could please give it another try? > > if instead of echo "RUN_OPT += --include image/uboot" >> etc/build.conf > I change RUN_OPT = --include boot_dir/hw to RUN_OPT = --include > boot_dir/hw image/uboot the build succeeds but no uImage gets created. There is missing an --include after boot_dir/hw. > I'm using clean Ubuntu 15.10 VM, Genode15.05 x86-64 tool chain, and the > latest version of Genode 16.02 That should be fine. If you try using the wrong tool chain, the build system should tell you and stop. Cheers, Martin [1] https://github.com/genodelabs/genode/blob/master/repos/os/run/tz_vmm.run Am 08.04.2016 um 11:08 schrieb Martin Stein: > Hey Yevgeny, > > If you only want to try the default setup, you can simply use the run > script [1] by doing 'make run/tz_vmm' in your build directory. The > script automatically downloads a precompiled Linux image. Have you tried > that? > > If you're really interested in customizing your Normal World Linux, > there is also a link in the run script to a detailed explanation on how > to compile the images [2]. I assume that your approach fails because of > the wrong toolchain. Does the tutorial fix your problem? > > Cheers, > Martin > > [1] https://github.com/genodelabs/genode/blob/master/repos/os/run/tz_vmm.run > > [2] > https://github.com/m-stein/genode_binaries/blob/master/tz_vmm/usb_armory/README > > Am 05.04.2016 um 21:49 schrieb Yevgeny: >> I'm trying to compile Genode for usbarmory. After executing this command >> *make ARCH=arm zImage LOADADDR=0x80008000 modules* from the root dir of >> the downloaded linux kernel, it gives me the following error. >> >> Makefile:664: Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: >> -fstack-protector-strong not supported by compiler >> CHK include/config/kernel.release >> CHK include/generated/uapi/linux/version.h >> CHK include/generated/utsrelease.h >> make[1]: 'include/generated/mach-types.h' is up to date. >> CC kernel/bounds.s >> gcc: error: unrecognized argument in option ‘-mabi=apcs-gnu’ >> gcc: note: valid arguments to ‘-mabi=’ are: ms sysv >> gcc: error: unrecognized command line option ‘-mlittle-endian’ >> gcc: error: unrecognized command line option ‘-mapcs’ >> gcc: error: unrecognized command line option ‘-mno-sched-prolog’ >> Kbuild:35: recipe for target 'kernel/bounds.s' failed >> make[1]: *** [kernel/bounds.s] Error 1 >> Makefile:980: recipe for target 'prepare0' failed >> make: *** [prepare0] Error 2 >> >> Please advise >> >> — >> You are receiving this because you are subscribed to this thread. >> Reply to this email directly or view it on GitHub >> <https://github.com/m-stein/linux/issues/2> >> ------------------------------------------------------------------------------ Find and fix application performance issues faster with Applications Manager Applications Manager provides deep performance insights into multiple tiers of your business applications. It resolves application problems quickly and reduces your MTTR. Get your free trial! https://ad.doubleclick.net/ddm/clk/302982198;130105516;z _______________________________________________ genode-main mailing list genode-main@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/genode-main
